• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.7-16
• /
• 1999

This research was carried out to compare structure, equilibrium moisture content(EMC), adsorption and acoustical properties between 4 retention levels of saligenin(o-hydroxybenzyl alcohol) treated, heat-treated and untreated chestnut(Castanea crenata S. et Z.) and paulownia(Paulownia spp.) woods. The cell structures of untreated wood and heat-treated wood were not different but the cell wall of saligenin treated wood was thicker than that of untreated wood for both species. EMC of untreated wood was the highest, next was that of heat-treated wood, and that of saligenin treated wood was the lowest, and among saligenin treated woods, EMC was decreased as retention level increased for both species. Adsorption curves were parabolically increased. Acoustical properties of saligenin treated wood were most improved, and the next were those of heat-treated wood. Comprehensive acoustical property was improved at retention level 20% and 30% for chestnut wood, and at retention level 80% for paulownia wood.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.344-348
• /
• 2007

The acoustic liner has been used for the suppression of noise. The impedance characteristics of the acoustic liner are increased by the incident pressure. For the estimation of the acoustic liner on the incident acoustic pressure effect, the modified impedance model is suggested on the basis of the GE impedance prediction model. The modified impedance model is originated from the 3 parameter impedance model, and extended to the incident pressure parameter. The modified model is applied on the simple duct analysis with variant source pressure. Through the computation, it is observed that the fore directivity patterns of the duct are varied by the incident SPL level.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.04a
• /
• pp.413-421
• /
• 2009

This paper investigates tensile characteristics of the stress aging heat-treated SM45C steel which are aging temperature at $250^{\circ}C$, $300^{\circ}C$, aging time at 1, 3 hours, and applied load at 300, 400N conditions by using acoustic emission. Most suitable aging condition was aging temperature $300^{\circ}C$, aging time 1 hour, and aging applied load 300N. And increased yield load 28.3% than non-treatment specimen in this condition. AE energy in elastic limit increased about 16.7 times than non-treatment specimen. When aging time is 3 hours, yield load decreased than other conditions that possibility is high to have itself defect on inside the specimen or coarse grain size precipitation is different in happened over-aging phenomenon. Especially, in case of $300^{\circ}C$, 3 hours and 400N condition appeared AE energy in elastic limit fairly high about 30 times than non-treatment specimen. This is considered by emit a lot of energies when material causes plastic deformation because the ductility increases on specimen by over-aging phenomenon.