• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.107-110
• /
• 1998

차량의 주요 소음원부터 실내 탑승자의 귀의 위치까지 도달되는 소음의 전달에 대한 전체적인 경로 및 주파수특성에 대한 해석은 차량의 구조-음향적인 특성이 복잡하므로 매우 어렵다. 그러나, 중-고주파수에 대한 대책에 있어서는 흡차음재가 유용함은 이미 알려진 사실이다. 차실 벽면에 사용된 흡/차음재는 소음레벨에 부분적인 기여를 함은 물론이고 음질에도 영향을 미친다. 소음 레벨에 있어서는 수백 Hz 이하의 저주파수 성분이 주요하며, 음질에는 중-고주파수 대역의 소음특성이 큰 영향을 미친다[1]. 본 논문에서는, 실험적으로 측정된 소음원의 특성을 수치해석 모델에 이용하여 소음레벨 저감과 음질개선을 위한 흡/차음재의 개선방향을 모색하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.13-16
• /
• 1993

본 연구에서는 공동주택의 바닥충격음 차음성능 향상을 위한 설계자료의 제시를 위해 천장구조가 서로 다른 공동주택을 대상으로 경량 및 중량 바닥충격음의 현장측정을 통하여 공동주택의 천장구조에 의한 바닥충격음 변화특성을 분석하고 차음성능을 평가하였다. 측정대상 건물에서 천장을 설치한 경우가 비교적 높은 충격음 차음성능 분포를 보이는 것으로 나타났으며, 바닥슬래브 하부 천장에 공기층과 완충재를 함께 설치하는 것은 기존 공동주택 등에서 경량 및 중량 바닥충격음 차음성능을 향상시키기 위한 효과적인 방안임을 확인하였다.

• Composites Research
• /
• v.17 no.3
• /
• pp.15-22
• /
• 2004

Acoustic load generated by rocket propulsion system is one of major dynamic loads during lift-off phase so that it causes the structural failure and electronic malfunction of payloads. Acoustic loads can be greatly reduced by an appropriate acoustical design of nose faring structures. This paper deals with the acoustical design of the nose fairing structure for launch vehicle. It is well known that a honeycomb sandwich structure is a poor sound insulator because of its high specific stiffness. In this paper, the sound transmission characteristics of four kinds of honeycomb structures for noise fairing were investigated by means of numerical and experimental ways. In order to estimate transmission loss, infinite plate theory by Moore and Lyon and statistical energy analysis (SEA) method were used. The predicted results showed a good agreement with measured ones. These enabled us to determine a proper core material for nose fairing, which shows good sound insulation performance per weight.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.2
• /
• pp.50-58
• /
• 1992

To improve the quality of dwelling environment of domestic apartment house, it is required to establish the sound insulation standard and the performance evaluation method which is suitable to the domestic residential conditions. In this study, the properties of internal noisy sources of a single unit in apartment houses and the sound insulation performance of party walls are investigated and analyzed, as a primary step to the establishment of sound insulation standard. Based on these data, the differences in sound insulation index of each plane type are investigated along with their causes. Also, the factor which affect and decide the insulation performance are analyzed in an effort to improve the performance of party wall structures.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.2
• /
• pp.113-123
• /
• 2023

This paper describes the acoustical conditions of elementary school and high school classrooms as well as university classrooms in Korea and suggests a need for Korean acoustic standards and guidelines for classroom design. Current standards and guidelines of classroom acoustics in several countries were briefly introduced to understand their acoustical performance criteria for background noise levels and reverberation times, and noise isolation design requirements in various types of classrooms. The results of several acoustic survey of domestic classrooms in elementary school, high school, and university were described and compared to provide information of the acoustic characteristics of Korean school classrooms. The survey includes occupied and unoccupied data on the acoustical conditions, noise levels, and noise isolation performance in the classrooms. Acoustical parameter values for achieving 'good' speech intelligibility in active university classrooms were also presented.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1991.06a
• /
• pp.122-128
• /
• 1991

본 연구는 오디토리움에서 일어나는 음향특성을 설계단계에서 미리 예측함으로써 그 설계가 음향학적 요구에 적합한지를 효과적으로 검토할 수 있는 컴퓨터시뮬레이션모델을 개발하고자 한다. 개발된 모델에 의해 음향설계단계에서 이루어지는 방대하고 반복적인 계산작업을 효율적으로 처리할 수 있게 함으로써 음향평가에 소요되는 시간과 오차를 줄일 수 있게 되었으며, 실내음장에서의 초기 시간차, 음압분포, 잔향시간, 그리고 적정 암소음유지를 위한 구조체의 차음성능을 예측하고 다목적홀의 설계사례와 비교하여 컴퓨터를 이용한 음향설계기법의 실용성 및 타당성을 검토하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.4
• /
• pp.248-255
• /
• 2018

It is known that the road noise on the rear seat of a hatchback type car is worse than that of a sedan type car because of the weakness on sealing structure. Therefore, a sound sealing system and sufficient absorption/insulation performance are required. In the case of a compact segment car, however, the application of the sufficient absorption and insulation materials is limited, because of the restriction on the production cost and weight of the car. In this study, we estimate the noise transmission path on the vehicle's body structure from tires and ground using the PBNR (Power Based Noise Reduction) method which is useful in quantitative measurement. Based on these results, we suggest an alternative absorption/insulation method for the better performance of rear seat road noise reduction in a compact hatchback car.

• Journal of KSNVE
• /
• v.3 no.3
• /
• pp.192-198
• /
• 1993

옥외에서 발생하는 소음은 음원과 수음점 사이의 시선을 차단하는 장애물을 설치하는 방법이외에는 달리 방도가 없는 경우가 많다. 빛과 마찬가지로 소리도 시선이 차단되면 소리의 그늘이 지는데 빛의 경우보다는 상당히 강한 음장이 이 그늘에 존재한다. 그늘 영역에서의 음장은 소리의 회절현상에 기인하는 것으로서 회절음장은 곧 방음벽의 차음효과를 좌우한다. 방음벽의 차음효과는 잉여감쇠(excessive attenuation)로 표시되는데 잉여감쇠에 영향을 주는 인자는 방음벽의 기하학적 조건, 음향학적 성질, 설치지면, 주변지형, 풍속 및 온도분포와 같은 기상조건, 음원의 특성 등 다양하지만 가장 기본적인 인자는 기하학적인 조건이다. 본고는 방음벽의 원리에 국한하여 살펴보기 위해 기술된 것이므로 주로 판 또는 쐐기 형태의 물체에 의한 회절현상을 취급하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.2
• /
• pp.38-49
• /
• 1992

The structure borne sound is one of the most important factor in building acoustics. Nevertheless, there is not yet sufficient knowledge to predict its behavior in preparing the acoustical design of a building. We are concerned with the concrete floating floor construction, which is one of the most promising ways to control floor impact sound. This study is to develop floating screeds isolated from the conventional concrete floor structures, to improve the concrete floor systems for the purpose of the good sound insulation performance which protects the propagation of the structure borne sound. Floor impact sound in many apartment house buildings and developed floating floors was measured, and we can save many floor impact sound data.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.8
• /
• pp.592-597
• /
• 2013

It is widely known that the sound insulation of soundproof panel is highly correlated to two factors, surface density of material and the frequency of noise. Accordingly, the character of traffic noise released in actual situation is important requisite for determining thickness to determine surface density and material of soundproof panel. This present study selected polymer panel with advantage of light weight and workability and evaluates according to frequency of traffic noise. Polypropylene (PP) and high-density polyethylene (HDPE) were selected as subjects based on economic valuation and efficiency. The sound transmission loss of selected polymer panels were compared with the currently used panels such as polycarbonate (PC) and polymethyl methacrylate (PMMA) depending on thickness and materials. As a result, PC showed the highest sound transmission loss followed by PMMA, HDPE, and PP in range of mass law. In terms of acoustic performance on thickness, the transmission loss increased with thickness of soundproof panel meanwhile coincidence dip was observed in lower frequency where had reduced transmission loss. Therefore, it is suggested that after determining target frequency, the kind of materials and thickness of soundproof panel need to be designed so that traffic noise can be more efficiently reduced.