• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.174-186
• /
• 2009

When we apply a propagation model to the ocean with boundaries, we can calculate reflected wave using reflection coefficient suggested by Rayleigh assuming the boundaries are flat. But boundaries in ocean such as sea surface and sea bottom have an irregular rough surface. To calculate the reflection loss for an irregular boundary, it is needed to compute the coherent reflection coefficient based on an experimental formula or scattering theory. In this article, we derive the coherent reflection coefficients for a fluid-fluid interface using perturbation theory, Kirchhoff approximation and small-slope approximation respectively. Based on each formula, we can calculate coherent reflection coefficients for a rough sea surface or sea bottom, and then compare them to the Rayleigh reflection coefficient to analyze the reflection loss for a random rough surface. In general, the coherent reflection coefficient based on small-slope approximation has a wide valid region. Comparing it with the coherent reflection coefficients derived from the Kirchhoff approximation and perturbation theory, we discuss a valid region of them.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.391-398
• /
• 1998

The intake noise, a major source of vehicle noises, has rapidly become a noticeable, and has been studied to reduce the level. Traditionally, the intake system has been developed through the road test and the experiment using a engine dynamo, namely, the trial and error process. This approach require very high cost and long time consuming to develop the system. In this study, the simulator which had a speaker in the cylinder head was presented. It was easy to analyze the acoustic characteristic of the intake system in laboratory environment. This study presented a improvement to reduce the level of the intake noise using the Transfer Matrix Method and NIT/SYSNOISE, FE analysis commercial software. It was to select optimum position of a resonator and verified by the simulator. This simulator can be used early in the design stage of development of the intake system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.52-61
• /
• 2007

Temporal and spatial variations of sea water largely affect on the pattern of underwater sound propagation. Acoustic environmental changes and their effects on underwater sound propagation in the northern part of the East Sea, which have been poorly studied mainly due to lack of observations, are investigated by analyzing the hydrographic data acquired since 1993. Severe changes in acoustic environments are associated with various physical processes such as deep convection, thermal fronts, and eddies in the northern part of the East Sea. Spatio-temporal variations of sound speed field and the layer of the maximum sound speed are categorized into six typical cases. Using a sound source of 5 kHz, acoustic transmission losses are calculated range-independently for the six typical cases. Significant differences among the patterns of transmission loss in the six cases suggest that a different tactics are required when we operate in the northern part of the East Sea.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.4
• /
• pp.415-423
• /
• 2009

To investigate low frequency acoustic transmissions in the Sub-Polar Front(SPF) of the East Sea, numerical experiments are conducted with Range dependent Acoustic Model(RAM) using Circulation Research of the East Asian Marginal Seas(CREAMS) data and Autonomous Profiling Explorer(APEX)) data. Significant seasonal variations of sea water properties are existed across the Sub-Polar Front(SPF) region from the north and the south. The model results show that Transmission Loss(TL) decrease(about 20dB) with ideal front in the warm region whereas TL increase(about 25dB) with ideal front in the cold region. Regardless of season(both in summer and winter), when the sound source is located in the cold region of the SPF, the model results show weak TL, compared to the case of the source in the warm region(Maximum difference of TL reaches 28dB). This difference between the cases when the source is located in the cold region and the warm region, is accounted for from the different vertical profiles of sound speed in both regions.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.153-163
• /
• 1999

본 연구에서는 격자패널을 통한 소음전달을 감소시키기 위하여 외부 구조적 가진으로부터 유발된 경량 패널의 진동을 능동 제어하는 기법을 기술한다. 최적 되먹임제어기와 적응 앞먹임제어기가 결합된 혼합형 제어기가 진동제어기로 사용된다. 되먹임제어기는 주파수 영역의 모델규명법에 의해 추출된 다중 입/출력 패널진동계 모델에 대하여 LQG 최적기법을 이용하여 감쇠능을 향상시키도록 설계된다. 앞먹임제어기는 되먹임 궤환의 결합효과를 자동적으로 보정할 수 있는 제안된 학습법칙에 기초하여 패널의 잔류진동이 최소가 되도록 적응된다. 45.7${\times}$45.7${\times}$2.54 ${cm^3}$ 벌집형상의 고강도 패널, 4개의 관성형 구동기 및 이산신호처리장치에 의해 구현된 패널 진동계에 대한 능동제어 실험을 수행해 본 결과 600Hz 주파수대역에 대한 12dB 진동저감이 이루어 질 수 있었다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.6 s.99
• /
• pp.680-686
• /
• 2005

This paper introduces the robust design of an intake system using transmission loss and the frequency weighting function. First, transmission loss is measured to evaluate the performance of the noise reduction for the intake system. The robust design parameters of the intake system are extracted by adapting a cost function with the Taguchi method. Subsequently, the frequency weighting function is developed by the subjective evaluation in which 6 special engineers were participated. Finally, the comparison between the proposed frequency weighted optimal design and unweighted optimal design for the transmission loss as the part is performed. Here, the overall levels of the transmission loss according to the methods are presented to validate the effectiveness of the proposed methodology.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.323-330
• /
• 1994

본 연구에서는 다공질 흡음재료 중 closed cell 구조를 갖는 발포수지재료(Foamed Material)에 음(sound)이 입사할 때 발생하는 흡음현상을 보다 정확히 예측하기 위해서 다공질 흡음재료에 대한 Biot 이론에 근거한 Allard의 모델링기법[4]을 이용하여 해석 프로그램을 개발하였고, 이를 이용하여 다공질 흡음재료가 단층(single layer)일 때 이 재료의 Surface Impedance와 흡음률(Absorption Coefficient)을 예측하고, 물성치(parameters)변화에 따른 다공질 흡음재료의 흡음특성을 분석하였으며, 이 재료가 자동차 제조시 사용되는 압연강판(rolled steel piate)에 부착되었을 때의 투과손실(Transmission Loss)을 예측하였고, 또한 다공질 흡음재료는 중고주파 대역의 음에 대한 흡음특성은 좋지만 저주파 대역의 음에 대한 흡음특성은 좋지 않으므로 흡음 재료의 저주파 대역의 흡음특성을 향상시키기 위해서 2층(two layers)으로 하였을 때의 흡음특성을 분석하였다. 본 논문의 연구결과는 자동차 제조시 사용되어지는 다공질 흡음재료는 물론 산업용기계나 건축용등 여러 분야에서 사용되어지는 다공질 흡음재료의 흡음특성 분석에 응용될 수 있으리라 기대된다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.770-773
• /
• 2004

The transmission loss coefficient is very important acoustic property in parallel with absorption and acoustic impedance categorizing the acoustical materials, which can control the acoustical problems. At the same time, the transmission loss coefficient is a key parameter to choose the optimum material for the analysis of acoustical characteristics of material using SEA(Statistical Energy Analysis). In this paper, the acoustic transmission loss measurement system using 4-microphone TL tube is applied to the exhaust system, which is one of the most important acoustic control parameters in a car, based on the idea calculating the full transfer matrix. The theoretical background and measurement system are introduced, and finally the measurement results are verified.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.646-650
• /
• 2001

In this paper, it is presented that the effect of air gap insertion in testing the transmission loss of sound barrier using structural vibration system. In this study, we use the APAMAT based on the structure-borne-noise. The measured results show that air gap insertion improves transmission loss as results of test based on the air-borne-noise. The measured results are compared with the predicted transmission loss using the transfer matrix method. The predicted results were found to be in reasonable agreement with measured results.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.4
• /
• pp.294-300
• /
• 2013

In this paper, we present performance analysis results of parametric array communication system in terms of theoretical BER and channel capacity of MIMO in underwater AWGN channel by using simplified SNR of difference frequency. The SNR of the difference frequency is calculated by using transmission loss, noise level, and source level of difference frequency in which nonlinear effect is considered. By assuming primary frequencies as 210 kHz and 190 kHz, difference frequency as 20 kHz, transducer diameter as 0.1 m, and noise level as 50 dB and the requested BER as $10^{-4}$, we obtain parametric array communication range gains over the communication system using primary frequency of 59.11 km in fresh water and 5 km in sea water, respectively. Also we obtain range gains of 38.84 km and 46.38 km in fresh water, and 3.88 km and 4.38 km in sea water when we use SISO and $2{\times}2$ MIMO parametric array communications for the channel capacity of 10 bps/Hz.