• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.5
• /
• pp.87-94
• /
• 2014

It becomes critical to understand an energy coupling mechanism between flow perturbations and combustion heat release rate fluctuations for the understanding of high-frequency combustion instabilities occurring in high-performance combustion/propulsion systems. A significant amount of experimental researches have been carried out to understand flame dynamic characteristics by use of flame transfer functions with artificial flow disturbances. Among them, there exist substantial studies on flame response by the excitation of inlet flow. Recently, experimental studies simulating transversal modes excited in actual combustion systems are under way.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.677-683
• /
• 2015

Hybrid rocket combustion displays low frequency instability(LFI, 10~30Hz) at a certain condition. Vortex shedding in the post-chamber is suspected to cause the occurrence of LFI. This study focused on the visualization of flow image using light emissions from high temperature combustion gas. Results shows that combustion pressure oscillates at a frequency of about 18 Hz, which is in phase with oscillations of light emission. Since LFI is not a property of thermo-acoustic instability, this result suggested there exists a physical coupling of pressure fluctuations with light emissions proportional to chemical reaction. Also POD analysis shows that dominant symmetric spatial modes in the stable combustion shift suddenly into asymmetric spatial pattern with the appearance of LFI. Especially, the appearance of mode 3 is a typical change of flow dynamics in unstable combustion representing a rotational fluid motions associated with vortex shedding.

• Geophysics and Geophysical Exploration
• /
• v.16 no.3
• /
• pp.145-153
• /
• 2013

High-resolution chirp profiles were analyzed to investigate the echo types of near-surface sediments in the Yellow Sea off the Baegryeong Island. On the basis of seafloor morphology and subbottom echo characters, 7 echo types were identified. Flat seafloor with no internal reflectors or moderately to well-developed subbottom reflectors (echo type 1-1 and 1-2) is mainly distributed in the southern part of the study area. Flat seafloor with superposed wavy bedforms (echo type 1-3) is also distributed in the middle part. Mounded seafloor with either smooth surface or superposed bedforms (echo type 2-1, 2-2, and 2-3) occurs in the middle part of the study area. Irregular and eroded seafloor with no subbottom reflectors (echo type 3-1) is present in the northern part of the study area off the Baegryeong Island. According to the distribution pattern and sedimentary facies of echo types, depositional environments can be divided into three distinctive areas: (1) active erosional zone due to strong tidal currents in the northern part; (2) formation of tidal sand ridges in response to tidal currents associated with sea-level rise distributed in the middle part; and (3) transgressive sand sheets in the southern part. Such a depositional pattern, including 7 echo types, in this area reflects depositional process related to the sea-level rise and strong tidal currents during the Holocene transgression.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.2
• /
• pp.83-91
• /
• 2018

The noise sources of a tip-jet driven rotor can be separated by rotor blade noise and jet noise. The rotor blade noise consists of thickness noise, loading noise, nonlinear quadrupole noise, and jet noise is divided into nozzle momentum noise and jet radiation noise. The flow analysis for the prediction of rotor blade noise is performed by CFD (Computational Fluid Dynamics) analysis, and the noise source of the rotor blade noise is identified by simultaneously applying the permeable and impermeable surface based FW-H (Ffowcs Williams-Hawkings) acoustic analogy. The nozzle momentum noise is obtained by permeable surface FW-H, and jet radiation noise is predicted by using empirical method for the fixed-wing jet. Both of jet noises use nozzle exit condition for noise analysis. The accuracy of the technique is verified based on the noise measurements of the tip-jet driven rotor, and the unique noise characteristics of the tip-jet driven rotor is confirmed by spectrum analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.8
• /
• pp.375-380
• /
• 2007

A reverberation chamber should be designed and constructed so as to satisfy its purposes and available space. However, it is somewhat difficult to meet the intended design requirements due to various errors from construction process. So, the post-construction measurement of its volume and surface areas is very essential to check the actual volume and volume uncertainty of a reverberation chamber These values should be carefully calculated and accurately estimated since they are used not only to evaluate the acoustic characteristics of building materials but also to calculate uncertainties for other acoustic characteristics. In this work, the method for the calculation and uncertainty estimation of the volume of a reverberation chamber is presented. To this end, the coordinates of all corners was measured with Total Station after construction. The results showed that the calculated volume of the measured reverberation chamber differs by 5 % from the design specification. The expanded volume uncertainty was also estimated to be about 2 % of the total calculated volume.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.672-675
• /
• 2009

동해 울릉분지에서 취득된 다중채널 탄성파자료 해석에 의하면 이 지역에는 가스하이드레이트 부존가능성을 지시하는 해저모방반사면, 탄성파침니/칼럼, 음향공백대, 증폭반사면, 가스분출 구조 등을 포함하는 5가지 탄성파 지시자가 존재한다. 가장 대표적인 지시자인 해저모방반사면은 연구지역의 남쪽사면의 경우 연속성이 양호하고 강한 진폭을 갖는 반면, 북쪽 중앙분지에서는 상대적으로 진폭이 약하고 연속성이 불량하다. 반사도 감소 및 속도 풀업 특징을 갖는 탄성파 침니/칼럼구조는 중앙분지와 북동쪽해역에 주로 분포하며 가스하이드레이트 혹은 가스유체의 부존가능성을 시사해준다. 반사강도가 약화되어 나타나는 음향공백대는 저탁류/원양성 퇴적물이 분포하는 중앙분지에 부분적으로 발달하며, 칼럼과 연계된 음향공백대는 북동쪽 사면저부에 주로 분포한다. 해저모방반사면의 하부에 위치하는 증폭반사면은 연구지역의 서쪽 사면에 분포하며 강한 음의 진폭특성으로 보아 자유가스를 함유한 층으로 해석된다. 가스분출구조는 주로 쇄설성 퇴적물이 우세한 조사지역의 남쪽 대륙사면지역에 광범위하게 분포하며 돔구조 혹은 폭마크 등을 수반한다.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.416-421
• /
• 2001

This paper presents the numerical prediction of sound generated by viscous flow past a circular cylinder. The two dimensional flow field is predicted using FEM based Reynolds-averaged Navier-Stokes solver, and the calculated unsteady fluid field values are utilized by an acoustic code that implements Ffowcs Willianms-Hawkings(FW-H) equation. The integration surface used in acoustic analysis is extended from the cylinder surface to permeable surfaces. The 2D based CFD calculations overpredict the acoustic amplitude, however, if adequate correlation length is used, the predicted acoustic amplitude agrees well with experiment. The predictions using extended integral surface in FW-H equation show results that contain the characteristics of quadrupole - volume integration - noise term, and do not vary seriously with the integral surface location.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.2
• /
• pp.15-20
• /
• 2013

An aero-acoustic performance analysis method of regenerative blower is developed as one of the FANDAS codes. The aerodynamic performance of regenerative blower is predicted by using momentum exchange theory coupled with pressure loss and leakage flow models. Based on the performance prediction results, the noise level and spectrum of regenerative blower are predicted by discrete frequency and broadband noise models. The combination of the performance and the noise prediction methods gives aero-acoustic performance map and noise spectrum analysis results, which are well-agreed with the actual measurement results within a few percent relative error.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.4
• /
• pp.440-446
• /
• 2003

Steady-state structure and acoustic pressure responses of GH$_2$-LOx diffusion flames in stagnation-point flow configuration have been studied numerically with a detailed chemistry to investigate the acoustic instabilities. The Rayleigh criterion is adopted to judge the instability of the GH$_2$-LOx flames from amplification and attenuation responses at various acoustic pressure oscillation conditions for near-equilibrium to near-extinction regimes. Steady state flame structure showed that the chain branching zone is embedded in surrounding two recombination zones. The acoustic responses of GH$_2$-LOx flame showed that the responses in near-extinction regime always have amplification effect regardless of realistic acoustic frequency. That is, GH$_2$-LOx flame near-extinction is much sensitive to pressure perturbation because of the strong effect of a finite-chemistry.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.217-222
• /
• 1995

소음기의 음향 성능을 평가하기 위해서는 음원의 임피던스를 알아야 한다. 음원의 임피던스를 구하기 위한 많은 연구가 행해졌고 정재파법, 음향전달함수법, Two Load Method(TLM), Four Load Method(FLM)등이 여러가지 방법이 개발되었다. 정재파법은 저주파수에서 음원의 출력보다 큰 출력음을 발생시킬 수 있는 스피커가 있어야 하고, 주파수별로 반복 측정해야 하는 번거로움으로 인해 실험에 어려움이 따른다. 전달함수법과 Two Load Method(TLM)는 관내에서 음압을 측정해야 하는데 엔진의 흡배기계와 같이 음압이 높거나 고온의 가스 유동이 있는 경우 측정이 매우 어렵다. 한편 Four Load Method(FLM)는 외부의 방사 음압을 측정하여 음원의 특성을 구하기 때문에 위에서 언급한 문제점들이 없는 반면에 무향실을 이용해야 한다. 본 논문은 음원의 임피던스 측정의 여러 방법 중 FLM에 의하여 스피커 음원의 임피던스를 측정하고 삽입손실을 구하면서 FLM이 가진 문제점을 검토하였다.