• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1131-1136
• /
• 2011

This study is performed on the acoustic emission parameters involved in a burst test for a CNG-vehicle fuel tank. A resonant AE sensor with a central frequency of 150 kHz was attached on the composite materials in the center of the fuel tank. The analysis of AE parameters such as hit, amplitude, count, duration, risetime, and signal strength during load holding was performed. The total count and total signal strength are effective tools for the damage evaluation of a CNG fuel tank.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.50.2-50.2
• /
• 2011

자동차용 CNG 연료탱크의 복합재료 중앙부 표면에 150 kHz 공진형 음향방출센서를 부착하고, 물을 매질로 하여 용기의 내압을 단계적으로 상승시켜 가면서 각 단계에서 일정시간 압력을 유지시키고 그 때 발생하는 음향방출신호를 획득하였다. 이 때 획득한 음향방출신호의 amplitude, count, duration 및 risetime 등과 같은 음향방출 변수들의 분포를 살펴본 결과 복합재료 압력용기의 손상메커니즘을 추정하고 손상정도를 평가하는데 유용하였다.

• 기계와재료
• /
• v.21 no.2
• /
• pp.156-164
• /
• 2009

재료시험 및 비파괴시험법의 하나로 다양한 분야에 응용되는 음향방출 시험법에 대한 관심이 증가하고 있다. 본 고에서는 음향방출 시험법의 이론, 음향방출 변수, 결과의 분석방법을 소개하고 학문적인 이용과 설비진단의 응용을 간략하게 소개하고자 한다.

• Composites Research
• /
• v.24 no.4
• /
• pp.36-40
• /
• 2011

This paper described analysis of acoustic emission parameter for the damage evaluation of type II vehicle fuel tank during fracture test. The observation of Kaiser effect, Felicity effect and creep effect is the means of damage evaluation method. It is possible to evaluate tank damage by the ratio of hit of over 60 dB and total hit. Damage mechanism of pressure tank can be estimated by analysis of average rise time, average amplitude.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.254-262
• /
• 2003

In this study, acoustic emission (AE) signals due to surface cracking and moisture movement in the flat-sawn boards of oak (Quercus Variablilis) during drying under the ambient conditions were analyzed and classified using the principal component analysis. The AE signals corresponding to surface cracking showed higher in peak amplitude and peak frequency, and shorter in rise time than those corresponding to moisture movement. To reduce the multicollinearity among AE features and to extract the significant AE parameters, correlation analysis was performed. Over 99% of the variance of AE parameters could be accounted for by the first to the fourth principal components. The classification feasibility and success rate were investigated in terms of two statistical classifiers having six independent variables (AE parameters) and six principal components. As a result, the statistical classifier having AE parameters showed the success rate of 70.0%. The statistical classifier having principal components showed the success rate of 87.5% which was considerably than that of the statistical classifier having AE parameters.

• Proceedings of the KWS Conference
• /
• 2001.05a
• /
• pp.318-321
• /
• 2001

클래딩은 주요 산업분야에 내마모성, 내부식성의 향상을 위해 사용되고 있다. 그러나 클래딩 공정에서는 모재와 클래딩 재료의 물리적, 화학적 특성의 차이와 여러 가지 공정 변수의 영향으로 제품의 사용에 치명적인 손상을 줄 수 있는 균열, 슬래그 개재물, 기공등의 불연속이 발생하기 쉽다. 본 연구에서는 클래딩 시에 발생되는 불연속을 실시간으로 검출하는데 아주 우수한 검출능력을 갖고 있는 비파괴 검사 방법인 음향방출시험을 적용하고 검출된 신호에 대한 주파수 분석과 2차원 위치표정을 실시하여 균열, 기공 등의 불연속을 검출하였고 이를 주사전자현미경을 통하여 확인하였다. 음향방출법에 의해 클래딩부에서 발생하는 결함에 대한 실시간 평가가 가능함을 입증하였으며, 특히 다층 클래딩이나 넓은 면적의 클래딩시에 불연속을 가장 신속하게 감지할 수 있으므로 이를 생산공정에 활용한다면 클래딩 또는 용접부 품질감시를 위한 효과적인 방법이 될 것이다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.1
• /
• pp.53-61
• /
• 2011

Edge notched A16061-T6 aluminum was repaired with a GFRP composite patch as a function of the number of stacking, Damage progress of specimen for tension load has been monitored by acoustic emission(AE), AE energy rate, hit rate, amplitude, waveform and 1st peak frequency distribution were analyzed. Fracture processes were classified into Al cracking, Fiber breakage, Resin cracking and Delamination. Displacement of a specimen can be divided into Region I, II and ill according to acoustic emission characteristics. Region II where the patch itself was actually fractured was focused on to clarify the AE characteristics difference for the number of stacking.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.5
• /
• pp.436-442
• /
• 2013

Friction welding is a very useful joining process to weld metals which have axially symmetric cross section. In this paper, the feasibility of industry application was determined by analyzing the mechanical properties of weld region for a specimen of tube-to-tube shape for excavator hose nipple with friction welding, and optimized welding variables were suggested. In order to accomplish this object, friction heating pressure and friction heating time were selected as the major process variables and the experiment was performed in three levels of each parameter. An acoustic emission(AE) technique was applied to evaluate the optimal friction welding conditions nondestructively. AE parameters of accumulative count and event were analyzed in terms of generating trend of AE signals across the full range of friction weld. The typical waveform and frequency spectrum of AE signals which is generated by friction weld were discussed. From this study the optimal welding variables could be suggested as rotating speed of 1300 rpm, friction heating pressure of 15 MPa, and friction heating time of 10 sec. AE event was a useful parameter to estimate the tensile strength of tube-to tube specimen with friction weld.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.4
• /
• pp.511-519
• /
• 1996

The purposes of this study are 1) to develop optimum FRW technique of SNCM220, SCM435, SACM645 and SCM415 bar-to-bar similar friction welding, 2) to develop in-process real-time weld quality nondestructive evaluation technique by acoustic emission method, and 3) to certify of weld quality by inspection of tensile fracture surface on friction welded joints.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.5
• /
• pp.412-423
• /
• 2000

By using the relation between stress intensity factor and AE parameter, new approach method for assessing the crack length and detectability of crack was proposed. Laboratory experiment was carried out to identify AE characteristics of fatigue cracks for compact tension specimen. The relationship between a stress intensity factor and AE signals activity as well as conventional AE parameter analysis was discussed. As a result, the features of specific parameter such as the length of crack growth the AE energy, the AE peak amplitude, and the cumulative AE hits, showed the almost same trend in their increase as the number of fatigue cycle increased. From the comparisons of peak amplitude and AE energy with stress intensity factor, it was verified that the higher stress intensity factors generated AE signals with higher peak amplitude and a larger number of AE counts. If we can get more reliable database for the relation between AE parameters and stress intensity factor, this approach will provide a good information for evaluating both the existence of crack and the minimum detectable size of crack.