• Journal of Biosystems Engineering
• /
• v.23 no.6
• /
• pp.621-628
• /
• 1998

In order to develop an inspection algorithm for an automatic eggshell inspection system, acoustic impulse response with neural network method was studied. An improved error backpropagation algorithm was selected as a loaming rule of neural network, and three layer network was chosen for the neural network architecture. Acoustic signals in time domain and theirs power spectrum were studied as the input to the neural network. The classification feasibility and success rate were investigated in terms of statistical analysis and neural network approach. As a result, the success rate was 95% with the statistical model having five independent variables. Among the neural network models studied, the power spectrum of acoustic signal as the input with 64 input neurons and the two impact data showed the success rate of 95.5% which was slightly higher than of statistical analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.292-299
• /
• 2018

The vehicle exterior design is the main parameter of aerodynamic wind noise, but the modification of it is nearly impossible at a proto-type stage. Therefore, it is very important to verify exterior design and estimate the correct wind noise level at the early vehicle design stages. The numerical simulations of aerodynamic wind noises around A-pillar and wiper were developed for specific vehicle exterior designs, but could not be directly used for the discussions with designers because these need complex modeling and simulation process. This study proposes new approach to A-pillar and wiper wind noise estimation at design stage using response surface methodology of modeFRONTIER, of which database is composed of PowerFLOW simulation, PowerCLAY modeling, SEA-Baced (Statistical Energy Analysis-Based) interior noise simulation, and turbulent acoustic power simulation. New design parameters are defined and their contributions are analyzed. A state-of-the-art, easy and reliable CAT (Computer Aided Test) tool for A-pillar and wiper wind noise are acquired from this study, which shows high usefulness in car development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.807-818
• /
• 2020

In this study, hydrophones using acoustic sensors were used to estimate the amount of bedload discharge in a forested watershed. The reaction characteristics were analyzed through hydrophone flume tests and field tests, and the quantitative bedload discharge was calculated and compared with that measured by a pit sampler. The hydrophone reaction changed the pulse according to the flow rate change, but did not react to standard sand. The pulse was different depending on the particle size and weight, and accordingly, there was a specific channel showing a suitable response. For a hydrophone installed in the field, by using an automatic impact device, the reaction characteristics of each channel were analyzed to confirm normal operation of the sensor and the suitability of the output value of each channel. In addition, a suitable channel was selected for the estimation of bedload discharge. The bedload discharge formula was developed using a hydrophone pulse and the average flow rate, and was compared with the measured data in the pit sampler in the study site. As a result of the study, if a hydrophone is used for monitoring the bedload in forested watersheds, it is considered effective in quantitatively estimating the weight of bedload discharge.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.5
• /
• pp.412-421
• /
• 2023

Ultrasound brain stimulation is spot-lighted by its capability of inducing brain cell activation in a localized deep brain region and ultimately treating impaired brain function while the efficiency and directivity of neural modulation are highly dependent on types of stimulus waveforms. Therefore, to optimize the types of stimulation parameters, we propose a cell-cultivable ultrasonic transducer having a series stack of a spin-coated polymer piezoelectric element (Poly-vinylidene fluoride-trifluorethylene, PVDF-TrFE) and a parylene insulating layer enhancing output acoustic pressure on a glass-coverslip which is commonly used in culturing cells. Due to the uniformity and high accuracy of stimulus waveform, tens of neuronal cell responses located on the transducer surface can be recorded simultaneously with fluorescence microscopy. By averaging the cell response traces from tens of cells, small changes to the low intensity ultrasound stimulations can be identified. In addition, the reduction of stimulus distortions made by standing wave generated from reflections between the transducers and other strong reflectors can be achieved by placing acoustic absorbers. Through the proposed ultrasound transducer, we could successfully observe the calcium responses induced by low-intensity ultrasound stimulation of 6 MHz, 0.2 MPa in astrocytes cultured on the transducer surface.

• Journal of Practical Engineering Education
• /
• v.10 no.1
• /
• pp.41-47
• /
• 2018

Underwater acoustic sensors are mounted on unmanned underwater vehicles(UUV) and detect and process the underwater information. These underwater acoustic sensor designs are very important subject for understanding and applying engineering. Therefore, in this paper, it was designed and fabricated the acoustic sensors step by step, evaluated their performance, and then studied the suitability of such a series of design procedures and steps to apply them to the integrated design learning. The results of the questionnaire survey showed that the steps and methods of the proposed sensor design are suitable for the contents of the integrated design project, and they are easy to acquire the technology and are very interesting design topics. It is anticipated that when the design project is applied to the integrated design in the future, high educational achievement will be achieved.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.383-386
• /
• 1998

한국어의 운율구조는 발화문장(utterance), 억양구(intonational phrase), 악센트구(accentual phrase), 음운적 어절(phonological word), 음절(syllable) 순의 계층적 구조를 가지고 있다. 본 연구에서는 운율구조의 각 층에서 성조 이벤트가 얹혀지는 음절이나 또는 각 층의 운율단위말의 음절의 음향적 길이를 측정함으로써 첫째, 운율단위말의 음절의 음향적 길이 또한 계층적 순위를 보이는지 둘째, 성조 이벤트(tonal event)와 음향적 길이 사이에 높은 상관관계를 보이는지 보고자 한다. 즉, 두 가지 측면에서 길이비교가 수행되었는데 하나는 언어 보편적 현상으로 알려진 구말 장음화 현상으로써 각 층 운율적 단위의 마지막 음절의 모음 길이 비교이며 다른 하나는 억양구초 고성조가 실현되는 음절의 모음과 어절 내 모음, 그리고 고성조가 실현되는 억양구말 음절의 모음간의 길이 비교이다. 남녀 각각 200문장의 각 분절음과 운율분석을 한 후 길이에 대한 일원분산분석 실시 결과 억양구말은 악센트구말 보다 길었으나 악센트구말은 어절말과 차이를 보이지 않거나 남자 화자의 경우 오히려 짧게 나타났다. 그리고 남자화자의 경우 악센트구초 고성자가 얹혀지는 음절의 길이는 어절 내 어절말 음절을 제외한 그 외 음절과 화자에 따라 큰 차이를 보이지 않거나 그보다 조금 짧게 실현되는 것으로 나타났다. 위의 결과는 첫째, 단위말 음절 모음의 장음화는 운율적 구조의 층위에 일대일 대응을 보이지 않는 것으로 해석되며 둘째, 성조 이벤트와 그것이 실현되는 분절음의 음향적 길이와는 큰 상관관계를 보이지 않는 것으로 해석될 수 있겠다. 그러나 이러한 일반화에 대한 충분한 근거 제공을 위해서는 해당음절의 모음 길이 뿐만 아니라 초성자음의 길이간의 비교와 음절자체의 길이 비교 또한 필요한 것이며 모음길이에 대한 선행자음의 분절음적 영향 고려가 수반되어야 할 것으로 보인다. 다음 내용을 정리해 보고자 한다.리해 보고자 한다.rc$ 구입할 때 중점적으로 살펴보는 사항은 신선도와 순수재래종 여부, 위생상태였다. 한편 소비자가 언제나 구입할 수 없다는 의견이 85.2%나 되어 원활한 공급과 시장조성이 아직 정착되지 않고 있었다. $\bigcirc$ 현재 유통되고 있는 재래종닭은 소비자 대부분이 잡종으로 인식하고 있었으며, 재래종과 일반육계와의 구별은 깃털색, 피부색, 정강이색등 외관상으로 구별하고 있었다. 체중에 대한 반응은 너무 작다는 의견이었고, 식품으로의 인식도는 비교적 고급식품으로 인식하고 있다. $\bigcirc$ 재래종닭고기의 브랜드화에 대한 견해는 젊고 소득이 높은 계층에서 브랜드화의 필요성을 강조하고 있다. $\bigcirc$ 재래종달걀의 소비형태는 대부분의 소비자가 좋아하였으나 아직 먹어보지 못한 응답자가 많았다. 재래종달걀의 맛에 대해서는 고소하고 독특하여 차별성을 느끼고 있었다. $\bigcirc$ 재래종달걀의 구입장소는 계란판매점(축협.농협), 슈퍼, 백화점, 재래닭 사육 농장등 다양하였으며 포장단위는 10개를 가장 선호하였고, 포장재료는 종이, 플라스틱, 짚의 순으로 좋아하였다. $\bigcirc$ 달걀의 가격은 200원정도를 적정하다고 하였으며, 크기는 (평균 52g)는 가장 적당하다고 인식하고 있으며, 난각색은 대부분의 응답자가 갈색을 선호하였다. $\bigcirc$ 재래종달걀의 구입시 애로사항은 믿을수 없고, 구입장소를 몰라서, 값이 싸다 등이었고, 앞으로 신뢰할 수 있고 위생적인 생산 및 유통체계가 확립될 경우 더 많이 소비하겠다는 의견이었다. $\bigcirc$ 재래닭 판매업소(식당)의 판매형태는 66.7%인 대부분의 업소가 잡종과 개량종 유색닭을 판매하고 있었으며, 1개 업소에서 1일 판

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.787-791
• /
• 2012

Characteristics of particle separation in water using labscale acoustic standing wave were studied. Acoustic standing wave is similar to either sound wave or ultrasonic, which makes a constant wave while returning to the origin by reflector. During that time, particulates dispersed in water are collected on the node of wave, where a sound pressure is zero. Acoustic standing wave transducer as of 28.0 kHz and 1.0 MHz were utilized and $6.8{\mu}m$ kaolin and $100.5{\mu}m$ redmud in average diameter were used as experimental materials in water. Once acoustic standing wave are generated in water, water temperature rises by $0.15{\sim}0.20^{\circ}C/min$ due to a sound pressure. Initial concentration of kaolin and redmud were controlled to have same as of 0.1, 0.2, 0.3, 0.4, 0.5 g/L, respectively. Removal efficiency of the turbidity in a reacting chamber after 5 minutes, when acoustic sound wave was formed in most distinct, was measured to have 18.2~56.2% for kaolin and 23.0~53.6% for redmud at 1.0 MHz. Particle separation was not observed at 28.0 kHz.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.4
• /
• pp.75-82
• /
• 1986

A field experiment was carried out to clarify the effect of underwater sound on the luring of fish school. The effects of. the acoustic emission on the luring of fish school were checked actually at a set net fishing site in Namhae using a commercial acoustic equipment, Dairyo-8. An emitting system of sound was designed by the authors, and the ambient noise, the sound pressure level and the reaction of fish school were measured in the set net. 1. The predominent frequency band of ambient noise was 150Hz-400Hz,.and the sound emitted was 400Hz-100Hz. The sound pressure level of ambient noise in set net was higher at the landing part, and lower at the playgrond, the gate of court and "the enterance of inclined "passage. The ambient noise was increased with the time elapse-d at the stage of hauling net, but :it was decreased suddenly at the final stage due probably to the decrease of the swimming speed of the fish school. 2. The results of the observation and the recording paper of echo sounder indicate that the effect of emitting sound in the bag net of set net was remarkable for the luring of fish school in the early stage, but decreased after 30 minutes. The reaction of fish school is more sensitiv2 to the sound pressure level than the time intervals between the emission and the pause. For the purpos~ of practical use, it is nesessary to confirm what kind of sound pressure level is the best for the luring of fish school. 3. In response to the acoustic equipment(Dairyo-8), fish school started to swarm 20 minutes after the sound emission and scattered when the sound paused. As the emitting pattern of the acoustic equiment, the three seconds of emission after one second of pause was more effective than the continuous emission at the set net fishing ground. Catch of the fish(s during th~ sound ernissio:l at the gate of court was three to five times more than that of no emission.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.6
• /
• pp.387-393
• /
• 2017

The dynamic interactions between benzoic acid derivative ($pH{\approx}7.0$)(guest) and ${\beta}$-cyclodextrin (${\beta}$-CD)(host) were investigated in an aqueous solutions in terms of ultrasonic absorption in the frequency range 0.2 MHz ~ 50 MHz with emphasis on the low-frequency range below 1 MHz at $25^{\circ}C$. We show that the interaction of ${\beta}$-CD and benzoic acid derivative complies with a typical spectrum of a single relaxation process around a few MHz. The ultrasonic relaxation observed in these solutions was due to a perturbation of a chemical equilibrium related to a reaction of an inclusion complex formed by the host and guest. The rate constant ($k_b=7.48{\times}10^6M^{-1}s^{-1}$) and equilibrium constant ($K=68.6M^{-1}$) were determined from the concentration dependences of benzoic acid on the relaxation frequency. The standard volume change (${\Delta}V=10.6{\times}10^{-6}m^3mol^{-1}$) of the reaction was also computed from the maximum absorption per wavelength. It was found that the hydrophobicity of guest molecules played an important role in the formation of the inclusion complex.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.473-479
• /
• 2016

We report a highly selective and sensitive 200 MHz Surface Acoustic Wave (SAW) sensor that can detect cyanide ion in aqueous solution using surface immobilized thioester molecules in combination with gold nanoparticles (AuNPs). To construct the sensor device, a monolayer of thioester compound was immobilized on the SAW sensor surface. At the sensor surface, hydrolysis of thioester group by nucleophilic addition of cyanide occurred and the resulting free thiol unit bound to AuNP to form thiol-AuNP conjugate. For the signal enhancement, gold staining signal amplification process was introduced subsequently with gold (III) chloride trihydrate and reducing agent, hydroxylamine hydrochloride. The SAW sensor showed a detection ability of $17.7{\mu}M$ for cyanide in aqueous solution and demonstrated a saturation behavior between the frequency shift and the concentration of cyanide ion. On the other hand, our SAW sensor had no activities for other anions such as fluoride ion, acetate ion and sulfate ion, moreover, no significant interference observed by other anions. Finally, all the experiments were carried out in-house developed sensor and fluidics modules to obtain highly reproducible results.