• 한국해양학회지
• /
• v.23 no.3
• /
• pp.146-157
• /
• 1988

Properties of porosity, compressional wave velocity, velocity anisotropy, electrical resistivity, and resistivity anisotropy are measured and calculated for two DSDP clay-rich hemipelagic sequences in the northwestern Pacific. Velocity and resistivity increase with burial depth at the expense of decreasing porosity. Profiles of velocity anisotropy and resistivity anisotropy show almost the same trend. Horizontally developed low aspect ratio pores may generate velocity and resistivity anisotropy. The preferred orientation of clay minerals is also believed to be responsible for the observed anisotropy.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.5
• /
• pp.421-427
• /
• 2010

In order to visualize the transfer of sound waves, we performed real-time processing with the fast operating system of GPU, the Graphics Processing Unit. Simulation by using the method of the discrete Huygens' model was also implemented. The sound waves were visualized by varying the real-time processing, the reflecting surfaces within the two-dimensional virtual sound field, and the states of the sound source. Experimental results have shown that reflection and diffraction patterns for the sound waves were identified at the reflecting objects.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.4
• /
• pp.387-395
• /
• 2019

TMA (Target Motion Analysis) in passive sonar is generally conducted with the bearing only or the bearing frequency. In order to conduct TMA fast and accurately, it is essential to estimate a initial target maneuver precisely. The accuracy of TMA can be improved by using SNR (Signal to Noise Ratio) information and acoustic propagation model additionally. This method assumes that the radiated noise level of the target is known, but the accuracy of TMA can be degraded due to a mismatch between the assumed radiated noise level and the actual radiated noise level. In this paper, TMA with the acoustic propagation model, bearing measurements, and SNR information is conducted in the ocean environment of South Korea (East Sea/ Yellow Sea/ South Sea). And the performance analysis of TMA for the mismatch in the radiated noise is presented.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.6
• /
• pp.601-609
• /
• 2022

In August 2007, coastal upwelling occurred off the east coast of Korea, and vertical water temperature and salinity data were obtained from a real-time surface ocean buoy. Based on the time series observation data, a vertical sound velocity structure was calculated before, during, and after the occurrence of the coastal upwelling, and how the coastal upwelling affects the sound propagation and detection environment through acoustic modeling considering the horizontal scale and actual seabed topography. As a result of comparing and analyzing the low-frequency (500 Hz) sound transmission loss and the target detection range by depth using the parabolic equation model, it was analyzed that if coastal upwelling occurs, a detection gain of up to about 10 dB can be expected. In addition, through this study, it was confirmed that the characteristics of sound propagation can be greatly changed even in a short period of about 2 to 3 days before and after coastal upwelling.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.6
• /
• pp.298-304
• /
• 2006

This paper proposes a ray-based forward modeling scheme which is suitable for the shallow water acoustic wave propagation simulations. The proposed model comprises of ray tracings for the layered media of which sound speed profiles are interpolated linearly. considerations of plane and spherical wave reflection coefficients. and calculations of the phases and the amplitudes of eigen rays. The main characteristic of the scheme is fast simulation time due to direct calculation of the broad-band time signals in the time-domain, i.e. without transformation of the frequency-domain solutions to the time si 밍 131s. Finally, we applied the model to 4-types of test environments and compared the resulting signals with those of ORCA and Ram in order to validate the proposed model.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.125-128
• /
• 1998

최근의 연구에서 해양의 내부파가 음파의 전달에 영향을 주어 비정상적인 손실을 일으키는 것으로 밝혀졌다. 일련의 실험을 통하여 한국 동해에도 강한 수온약층을 중심으로 한 내부파가 존재하는 것으로 밝혀졌으며, 음원과 수신기를 이용한 실험을 통해서도 관측된 내부파의 주기에 해당하는 음파의 변동 특성이 확인되었다. 내부파가 음파의 전파에 영향을 미치는 것은 모드간 간섭을 통하여 이루어진다. 본 논문에서는 모드간섭의 이론적 설명과 함께 음향모델을 통하여 내부파의 영향을 추정하였다. 모델링 결과 내부파는 음파의 모드간 에너지 전이를 일으켜서 에너지를 산란시키는 효과가 있는 것으로 보인다. 한편 거리독립 환경과 내부파가 존재하는 환경간에는 주파수 1 kHz를 기준으로 하여 거리에 따라 약 10dB까지의 전파손실 차이를 나타낸다.

• The Korean Journal of Petroleum Geology
• /
• v.12 no.1
• /
• pp.14-19
• /
• 2006

The electromagnetic (light) waves have a limitation to penetrate media, ie, water and sea-bottom layers, due to high energy attenuation, but acoustic (sound) waves play as the good messenger to gather the underwater target information. Therefore, the acoustic methods are applied to almost all of ocean equipments and technology in terms of in-water and sub-bottom surveys. Generally the sound character is controlled by its frequency. In case that the sound source is low frequency, the penetration is high and the resolution is low. On the other hand, its character is reversed at the high frequency. The common character at the both of light and sound is the energy damping according to the travel distance increase.

• 한국해양학회지
• /
• v.20 no.2
• /
• pp.10-21
• /
• 1985

The sound velocity (compressional wave) and attenuation coefficient in the marine surface sediments in the nearshore areas off the Pohang, Pusan, Yeosu and Kunsan were investigated in terms of the geotechnical properties of the marine surface sediments in the water depth range of 10-50 meters. The marine surface sediments in the study areas are variable, that is, sand to clay. Due to the various four different study area, the sound velocities and attenuation coefficients in the surface sediment facies vary 1,44m/sec to 1,510m/sec in velocity and 0.82dB/m to 3.70dB/m in coefficient respectively. In fact, the sound velocity increases with increasing of density and mean grain sizes of the sediments, and however, with decreasing of porosith. The correlation equations between the sound velocith and geotechnical properties of mean grain size, density, and porosity were expressed as the following: Vp=1512.28406-9.16083(Mz)＋0.20795(Mz)$\^$2/, Vp=1876.15527-597.50397(d)＋210.48375(d)$\^$2/, Vp=1559.47217-2.09266(n)$\^$2/. where Vp is sound velocity, Mz is mean grain size, d is density, and m is porosity, respectively. However, the relationship between the attenuation and geotechnical properties were different from that of sound velocity and geotchnical properties. Furthermore, the correlation equations between attenuation coefficient and geotechnical properties were expressed as the following: a=1.85217＋0.67197(Mz)-0.09035 (Mz)$\^$2/, a=48.87859＋58.21721(d)-16.3.143(d)$\^$2/, a=2.06765＋0.07215(n)-0.00111(n)$\^$2/, where a is attenuation coefficient. The high attenuation appeared in the silty sand through fine sand facies in sediment and k values in these facies were in the range of 0.86 to 0.89 dB/m/KHz.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.2
• /
• pp.201-211
• /
• 2015

Acoustic propagation in shallow water with changing environments is a major concern of navy. Temporal and spatial variability of acoustic propagation in the northern East China Sea (ECS) is studied, using the 11 years hydrographic data and the Bellhop acoustic model. Acoustic propagation in the northern ECS is highly variable due to extensive interaction of various ocean currents and boundaries. Seasonal variations of transmission loss (TL) with various source depths are highly affected by sharp gradient of sound speed and bottoms interaction. Especially, various bottom sediment types lead to severely degrading a waterborne propagation with bottom loss. In particular, the highly increased TL near the ocean front depends on the source position, and the direction of sound propagation.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.3
• /
• pp.216-222
• /
• 2015

A previous velocity measurement system for marine sediment had several problems such as the errors occurred when picking first arrival time and the inconvenient measurement procedure. In order to resolve these problems, we developed a new acoustic properties measurement system by using PXI (PCI eXtentions for Instrumentation) module based on LabVIEW. To verify the new system, we measured the velocity and attenuation of sediment using the new system in a parallel with the previous system under the same experimental environment. The result of measurement showed 1~2% margin of error for the velocity as well as similar attenuation values. We concluded that the new system can efficiently measure the acoustic properties of marine sediment. It also has an advantage to construct the database of acoustic data and raw signal.