• Journal of Life Science
• /
• v.18 no.8
• /
• pp.1036-1041
• /
• 2008

Methenyltetrahydrofolate synthetase extract was obtained from mouse liver and purified via $30{\sim}70%$ ammonium sulfate fractionation, Fast Q anion exchange and phenyl agarose chromatography. HPLC gel chromatography and SDS-polyacrylamide electrophoresis experiments showed that the enzyme is a monomer with molecular weight of 23 kDa. Optimum temperature and pH were $35^{\circ}C$ and 6.5, respectively. The enzyme was chemically modified only by tetranitromethane and 1-ethyl-3- (3-dimethyl aminopropyl)-carbodiimide (EDC), indicating that tyrosine and carboxylate are in the active site. pH studies showed that 2 tyrosines are involved in the binding of the substrates and a carboxylate in catalysis. Therefore, the chemical mechanism of the enzyme is likely that 2 tyrosines bind to ATP and 5-formylTHFand a carboxylate acts as a general base.

• Analytical Science and Technology
• /
• v.18 no.4
• /
• pp.298-308
• /
• 2005

The methods for determining C-14 and tritium contents in the spent nuclear fuel sample were developed. The carbon-14($^{14}CO_2$) released during the dissolution of the spent fuel sample and $CaCO_3$ ($CO_2$ carrier) with 8 M $HNO_3$ at $90^{\circ}C$ was collected in trap containing 1.5 M NaOH. The volatile radioactive iodine evolved when the spent fuel was dissolved, was trapped on to Ag-silicagel (Ag-impregnated silicagel) adsorbent in column which is connected to two NaOH traps. The solutions which contain tritium as HTO after fuel dissolution were decontaminated by deionization with a mixture of cation and anion exchange resins and inorganic ionexchangers. The amount of C-14 in the trap solutions and the HTO concentration in the resulting deionization water were then determined by liquid scintillation counting.

• Journal of Environmental Science International
• /
• v.18 no.12
• /
• pp.1411-1416
• /
• 2009

Several adsorbents were tried to remove the selenium ions from industrial wastewater and the following ascending order of the adsorption performance for the selenium at pH 9 was observed: cation exchange resin < chelate resin < zeolite < brown marine algae < granular activated carbon < anion exchange resin. Initial concentration of selenium(146 mg/L) in industrial wastewater was reduced to 63 mg/L of selenium at pH 9 by neutralization process. The maximum uptake of Se calculated from the Langmuir isotherm with anion exchange resin was 0.091 mmol/g at pH 10 and that with granular activated carbon was 0.083 mmol/g at pH 6. The affinity coefficients of Se ion towards anion exchange resin and granular activated carbon were 3.263 L/mmol at pH 10 and 0.873 L/mmol at pH 6, respectively. The sorption performance of anion exchange resin at the low concentration of Se, namely, was much better than that of granular activated carbon. The Se ions from industrial wastewater throughout neutralization process and two steps of adsorption using anion exchange resin was removed to 97.7%.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.351-357
• /
• 2003

Transuranic elements such as Pu, Am and Cm in synthetic solution of spent nuclear fuel samples were determined by electrodeposition followed by alpha-spectrometry after separation using anion exchange and extraction chromatography in order to determine the transuranic elements in radwaste samples from nuclear power plants. Plutonium was separated by 12M HC1-0.1M HI as an eluent on anion exchange column. As a second step Am and Cm were separated in a group by DTPA-Lactic acid as the eluent on HDEHP coated column. The nuclides of $^{239}Pu$, $^{241}Am$및 $^{244}Cm$ separated were determined by alpha-spectrometry after electrodeposition in 0.1M $NaHSo_4$-0.53M $Na_2SO_4$buffer solution as an electrolyte. The recovery yields of $^{239}Pu$, $^{241}Am$및 $^{244}Cm$ were 83.8%, 85.2% and 86.3%, respectively, from the synthetic solution containing uranium and non-radioactive metal elements.

• Journal of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.54-61
• /
• 1984

The species and equilibrium of molybdate and tungstate have been investigated from the elution behaviors of those in various concentrations of nitric acid and the UV spectra obtained at the various Z values. In higher concentrations than 0.05M nitric acid, the nitarte complex species of $MoO_2(NO_3)_2$ seems to form from the $MoO_2^{2+}$ ions formed by the following equation: $Mo_8O_{26}^{4-} + 20H^+$ ${\rightleftharpoons}$ $8MoO_2^{2+}$ + $10H_2O$. In the case of tungstate, the elution behaviors of tungstate in nitric acid medium are similar to those of perchloric acid, so we think the equilibrium of tungstate existed in perchloric acid could be also existed in nitric acid. These elution behaviors of tungstate are compared with the UV spectra obtained at the various Z values.

• Journal of Life Science
• /
• v.13 no.1
• /
• pp.67-72
• /
• 2003

Helicobacter pylori is the etiologic agent of human gastritis and peptic ulceration and produces urease as the major protein component on its surface. H. pylori urease is known to serve as a major virulence factor and a potent immunogen. Recombinant H. pylori urease expressed in E. coli was purified by simple purification procedures utilizing (CNBr-activated Sepharose-anti-urease IgG immunoaffinity chromatography or epoxy- activated Sepharose-urea affinity chromatography. Urease was apparently bound so tightly to the anti-urease IgG resin that it could not be eluted at various elution conditions except at certain extreme pH 1, including 100 mM carbonate (pH 10.5) buffer solution, which was shown to elute slightly inactivated but relatively pure enzyme. Urease eluted from the epoxy-activated Sepharose-urea affinity column showed higher activity, but the smaller UreA subunit of the enzyme appeared as a Fainter band of diminished intensity when subjected to SDS-polyamide gel electrophoresis.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.225-229
• /
• 1999

Enzymatic resolution reactions were investigated using Candida rugosa lipase for the production of potically pure S-(+)-Ketoprofen. When the enzymatic hydroysis (and esterification) of recemic ketoprofen esters (and recemic ketoprofen with alcohol) was investigated comparatively, aqueous media was more specific for S-enantiomer than organic media. In the enzymatic hydrolysis of racemic ketoprofen ethyl ester in aqueous media, optimal temperature and pH for enantioselectivity were $37^{\circ}C$ and 4, respectively. The stereoselectivity of the enzyme was enhanced by adding dialcohols such as ethylene glycol and propylene glycol. The enantiomeric ratio obtained in the 40 %(v/v) ethylene glycol was 2-fold higher than that without the additive. By adding $CH_2Cl_2$, $CHCl_3$ and $CCl_4$ (5%,v/v), the enantioselectivity was reversed. A dramatic increase in the stereoselectivity was achieved using lipase purified by anion exchange chromatography. The type A lipase(the first eluted lipase fraction) showed an enantiomeric ratio of >100, whereas the type B lipase(the second eluted lipase fraction) exhibited enantimomer ratio of 9.0 in the hydrolysis of racemic ketoprofen ethyl ester.

• Journal of the Korean Chemical Society
• /
• v.15 no.4
• /
• pp.191-197
• /
• 1971

Ruthenium content in highly purified palladium metal (99.9%) was determined by counting $^{105}Rh$ nuclide which was produced by $^{104}Ru(n,{\gamma};{\beta}^-)^{105}Rh$ nuclear reaction. Palladium sample and ruthenium standard were irradiated by neutron with the Pneumatic Transfer System of TRIGA MARK II reactor. Palladium and ruthenium were dissolved by treating with aqua-regia and by fusing with sodium peroxide flux respectively. $^{105}Rh$ was separated through anion and cation exchange resin columns. The ruthenium content was determined by comparing the $^{105}Rh$ activities, obtained from the palladium sample, with that from pure ruthenium standard. The detection limit of ruthenium by the present method is about 1 ppm of ruthenium in 10 mg of palladium, which is approximately 40 times more sensitive than that of the conventional radioactivation method which employs $^{102}Ru(n,{\gamma})^{103}Ru$ nuclear reaction.

• Journal of Korean Society on Water Environment
• /
• v.23 no.1
• /
• pp.27-32
• /
• 2007

This study focused on estimating the feasibility of a strong basic anion exchanger (PA312OH) as a sorbent for the removal of residual reactive dye and saving chemicals and water. Cellulose reactive dye C.I.RB49 was tested because reactive dye is the largest single group of dyes and that dye needs larger amount of inorganic salts as dyeing agent but nearly 50% of reactive dyes may be lost to the effluent. The adsorption characteristics of PA312OH for C.I.RB49 were as follows. Ion-selectivity among the dye and inorganic salts was Dye > ${SO_4}^{2-}$ > ${CO_3}^{2-}$ > $Cl^-$. C.I.RB49 was exchanged more than 3 times ${SO_4}^{2-}$ and ${CO_3}^{2-}$ and $Cl^-$ was not exchanged absolutely. The exchanging velocity was increased exponentially with increasing temperature. This result is positive effect on treating the high temperature dyeing process wastewater. The exchanged dye percents to initial were 96.8% and 99% at flow rate 20.5 mL/min. and 3.7 mL/min.. The exchanging capacity of PA312OH for C.I.RB49 was 215.2 mg/g at conc.=369.2 mg/L, Temp.=$25^{\circ}C$. 74% inorganic salts were recrystallized from real dark reactive color dyeing wastewater treated with PA312OH.

• Journal of the Korean Chemical Society
• /
• v.44 no.6
• /
• pp.581-586
• /
• 2000

Separation and coulometric titration method were applied for the determination of plutonium content in samples of PWR spent fuel. Plutonium was separated on an anion exchange(AG MP-1) column and determined by the controlled-potential coulometric titration. In this study, we discussed some experimental conditions related to the separation and determination of plutonium in PWR spent fuel samples. Average accuracy(recovery of plutonium) for the determination of 0.230∼3.02 mg plutonium standard was 99.36%. Average precision(relative standard deviation, RSD) for the determination of 0.250∼0.450 mg plutonium in PWR spent fuel samples was 0.38%.