• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.435-438
• /
• 2000

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.283-286
• /
• 2001

본 논문은 전기적으로 음장을 가변하여 청감적 인상에 변화를 주는 실험 결과를 기술하였다. 본 실험은 마이크로폰으로 무대의 음원을 수음하고 잔향기로 옆방향 반사음과 잔향음을 각각 생성하여 스피커로 출력하였다. 실험 결과 실내의 청감적 인상이 개선됨을 확인하였다. 또 음원 수음 시 발생하는 하울링, 실내 잔향과 다른 스피커의 음색, 잔향기에서 발생하는 음색 변조 둥 기술적 문제를 해결하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.4
• /
• pp.275-282
• /
• 2017

In this paper, using a pattern transformation triggered by deformation, we propose a porous structure that exhibits the characteristic of negative Poisson's ratio in both tension and compression. Due to the lack of torque for rotational motion of ligaments, the existing porous structure of circular holes shows positive Poisson's ratio under tension loading. Also, the porous structure of elliptic holes has a drawback of low durability due to stress concentration. Thus, we design curved ligaments to increase the rotational torque under tension and to alleviate the stress concentration such that strain energy is uniformly distributed in the whole structure. The developed structure possesses better stiffness and durability than the existing structures. It also exhibits the negative Poisson ratio in both compression and tension of 10% nominal strain. Through nonlinear finite element analysis, the performance of developed structure is compared with the existing structure of elliptic holes. The developed structure turns out to be significantly improved in terms of stiffness and durability.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.07a
• /
• pp.1-2
• /
• 2012

본 논문에서는 GPU 컴퓨팅 환경에서 물리적 모델링 기반의 음 합성 알고리즘을 수행하는 경우에 GPU의 개수에 따른 성능 및 에너지 효율의 변화를 분석한다. 실험결과, 6개의 GPU를 사용하였을 때 가장 좋은 성능을 보였으며, 1개의 GPU에서 가장 높은 에너지 효율을 보였다.

• The Journal of the Acoustical Society of Korea
• /
• v.7 no.4
• /
• pp.5-12
• /
• 1988

In order to know the preferred delay time of single reflection in relation in relation to the source signal, and to investigate whether or not there is any display in preference judgment of sound field between subjects of different nationalities, tests of subjective preference for musical sound fields with single reflection were preformed. The result showed that the preferred delay times agreed with the effective duration of auto-correlation function of the source signals, when the amplitude of reflection relative to the direct sound is 0dB. No fundamental disparity in series of judgement of sound field was found even for different series of Judgment with different music motifs. The result of preference test using different passages in single music showed that the fluctuation of the effective duration autocorrelation function over all the passages of the music was small. Thus, the preferred delay time can be determined by the coherence of autocorrelation function of the source signals and the amplitued of reflection.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.79-85
• /
• 2002

본 연구는 대추 수확기개발을 위한 기초연구로써 대추의 열매, 잎, 잎줄기의 물리적 역학적 특성을 조사.분석하였으며, 그 결과를 요약하면 다음과 같다. .대추 열매의 평균 장경, 경, 부피, 무게, 탈과력은 각각 32.02 mm, 23.9 mm, 10.0$\times$$10^{-6}$m$^3$, 5.2~12.8g, 5.7 N으로 나타났다. .대추무게가 증가하면 탈과력은 증가하고, F/W는 감소하는 경향을 나타났다. .대추나무가지의 평균 탄성계수는 7.01$\times$$10^{8}$ N/m$^2$였고, 가지의 굵기가 증가하면서 감소하였다. .대추나무가지의 평균 비틀림 강성은 5.2$\times$$10^{7}$ N/m$^2$으로 나타났으며, 가지의 굵기가 증가하면서 음의 지수 함수적으로 감소하는 경향을 나타냈으나, 데이터가 일정한 범위에 산재해 있어 가지의 굵기에 따른 강성계수변화 특성은 일정한 경향으로는 나타나지 않았다. .대추 잎줄기의 평균 무게, 잎수, 길이가 각각 0.7g, 6.6개, 12.2 cm로 나타났다. .대추 잎의 평균 잎면적, 무게, 탈리력은 각각 13 $cm^2$, 0.2g, 4.4 N으로 나타났다. .종말속도는 대추 열매의 무게가 증가하면서 증가하고, 대추잎의 무게, 면적이 증가할수록 감소하는 경향을 나타냈으며, 잎줄기의 종말속도는 잎줄기 무게 혹은 잎줄기에 매달린 잎의 수와는 거의 영향을 받지 않는 것으로 나타났으며, 잎줄기의 길이가 증가할수록 약간씩 증가하는 경향을 나타냈다.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.3
• /
• pp.79-87
• /
• 1999

In this paper, we reconstruct an algorithm of sound image control for real-time processing and implement a real-time system using digital signal processing board based on TMS320C40. The performance of real-time sound image control system was evaluated by a listening test. The results of the test showed that localized sound image can be perceived by headphone and speaker, and result of test by headphone was better than that of speaker. In the results of test of elevation perception, result of perception between left and right were better than those for differentiating between front and back, and the moving sound image was better than the fixed sound image.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.8
• /
• pp.1-8
• /
• 2013

This paper proposes an effective parallel implementation of a physical modeling synthesis of guitar on the GPU environment. We used appropriate filter coefficients and adjusted the length of delay line for each open string to generate 44,100 six-polyphonic guitar sounds (E2, A2, D3, G4, B3, E4) by using physical modeling synthesis. In addition, we analyzed the physical modeling synthesis algorithm and observed that we can exploit parallelism inherent in the length of delay line. Thus, we assigned CUDA cores as many as the length of delay line and effectively implemented the physical modeling synthesis using GPU to achieve the highest performance. Experimental results indicated that synthetic guitar sounds using GPU were very similar to the original sounds when we compared their spectra. In addition, GPU achieved 68x and 3x better performance than high-performance TI DSP and CPU, respectively. Furthermore, this paper implemented and evaluated the performance of multi-GPU systems for the physical modeling algorithm.

• The Journal of Engineering Geology
• /
• v.20 no.1
• /
• pp.89-100
• /
• 2010

Although various methods for determination of damage threshold in rock have been suggested, clear damage thresholds were determined by some methods, but different thresholds were measured by other methods. We determined the damage thresholds in Hangdeung granite using all the methods suggested, and investigated the best methods, applicability and errors of each method. The crack initiation threshold and the crack damage threshold which are important in investigation of characteristics of crack development and failure were verified by field strength ratio method and long-term constant load test. The crack closure stress and the crack initiation stress were 57.5 MPa and 77.6 MPa, and the most exact values were yielded by crack volumetric strain. The secondary crack initiation stress was 90.6 MPa and AE event count and AE event count rate were the effective methods. The volumetric stiffness, AE event count and AE event count rate were the most effective methods for determination of crack coalescence threshold and crack coalescence stress was 110.3 MPa. The crack damage stress was 127.5 MPa and was measured correctly by volumetric stiffness and AE event count rate. The ratio between crack initiation stress and uniaxial compressive strength was 0.47 which was very similar with the FSR value of 0.46. The ratio between crack damage stress and uniaxial compressive strength was almost the same as the ratio between long-term strength and uniaxial compressive strength, indicating that the crack initiation stress and the crack damage stress measured were correct.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.473-477
• /
• 2009

In general, the softer the stiffness of a linear vibration isolator the better the performance of isolation can be achieved. However, the stiffness of the isolator cannot be made too soft because it needs a sufficient stiffness to hold the load. This is the most critical limitation of a linear vibration isolator. Recently, a HSLDS (High-Static-Low-Dynamic-Stiffness) magnetic vibration isolator was proposed to overcome this fundamental limitation. The suggested isolator utilizes two pairs of attracting magnets that that introduces negative stiffness. Previously, this new type of vibration isolator was merely introduced and showed a possibility of practical use. In this paper, detailed dynamics of the HSLDS magnetic isolator are studied using computer simulations. Then, the isolation performance is examined for various design parameters to aid the practical use.