• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.1
• /
• pp.127-136
• /
• 2006

Shaded relief is used in the analysis of digital terrain model, but accurate shadow zone has not been affirmed on account of idea only shadow of terrain that would be in shadow are shaded. This study is to analyze each display difference of a digital terrain model by grasping the shadow characteristics of terrain and comparing shaded relief function used terrain display of GIS with a rendering technique. After terrain with road in subject area is selected and created to digital terrain model of TIN, shaded relief and rendering according to altitude and azimuth of the sun at 9:00 am and 3:00 pm is applied. As the results, only backward portions of the terrain that is in shadow from the sunlight are shaded in case of shaded relief. The rendering created the shadow, which is cast by terrain features. By these mutual comparison, this study represented data for understanding of shaded relief. And it is expected that the rendering method could be used to analyze sunshine influence.

• 한국지형공간정보학회:학술대회논문집
• /
• 2003.09a
• /
• pp.101-106
• /
• 2003

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.51-57
• /
• 2002

국내에서 활발하게 연구되고 있는 위성영상을 이용한 원격탐사는 매핑, 환경관리, 시설물 관리 등에 이용되어 왔다. 본 연구에서는 날씨나 태양의 제약을 받지 않는 RADARSAT SAR 영상의 수계지역을 신경망 기법을 이용하여 분류하고자 하였다. RADARSAT은 경사관측을 통하여 영상을 취득하며 지형의 기복에 의한 음영효과(Shadow effect)로 인하여 수계지역 분류시 정확도를 감소시킨다. 이러한 문제를 해결하기 위해서 본 연구에서는 RADARSAT SAR 영상의 역산란계수를 계산하고 음영효과에 의한 분류오류를 감소시키기 위하여 수치고도모형을 사용하였다. 지형의 기복이 작은 평지와 지형의 기복이 심한 산악지로 나누어 연구를 수행하여 각 지역별로 분류 정확도를 평가하였다. 연구결과로 역산란계수를 신경망기법의 단일 입력 자료로 사용한 경우보다 수치고도모형을 같이 사용한 것이 분류 정확도가 높았다. 또한, 수치고도모형을 역산란계수와 함께 입력 자료로 이용할 경우 평지보다 산악지에서 효율적이었다. 산악지역이 많은 국내에서는 SAR영상의 수계지역 추출을 신경망 기법으로 할 경우에는 수치고도모형을 함께 이용함으로써 분류정확도 향상을 시킬 수 있다고 사료된다.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.03a
• /
• pp.48-53
• /
• 2002

본 연구에서는 각각 1998년 8월 12일(홍수 발생시), 8월 19일(홍수 발생 후) 옥천, 보은 지역을 촬영한 RADARSAT SAR 위성영상을 이용하여 수계지역 및 홍수지역 분류를 수행하고자 하였다. 이를 위해, 먼저 두 장의 위성영상에 대해서 각각 스페클 잡영(speckle noise)을 제거하고, ${\sigma}^0$(sigma naught, dB)을 계산한 후 수계지역에 대한 ${\sigma}^0$값을 분석하였다. 이 값을 기준으로 각각 두 장의 위성영상에서 각각 최대우도법을 이용하여 수계지역을 분류하였다. SAR 영상은 영상취득의 원리에 의해 지형의 기복에 따른 음영효과(shadow effect)가 발생하는데, 음영효과가 발생하는 지역의 ${\sigma}^0$값은 수계지역과 비슷한 반사특성(낮은 dB 값)을 보인다. 따라서 지형의 기복이 심한 지역의 수계지역 분류시 음영효과를 제거해야 효과적적인 분류를 할 수 있으며, 이를 위해 위성의 헤더자료로부터 촬영시 각각의 촬영중심을 계산하고, 촬영중심과 지상좌표와의 기하학적 관계를 고려하여 음영효과를 제거하였다. 마지막으로, 수계지역만이 추출된 영상에 대해 영상의 기하보정을 수행하였으며, 기하 보정된 두장의 위성영상에 대해 차분영상를 생성함으로서 홍수지역을 분류하였다.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.637-654
• /
• 2023

In recent years, the number of users has been increasing with the rapid development of earth observation satellites. In response, the Committee on Earth Observation Satellites (CEOS) has been striving to provide user-friendly satellite images by introducing the concept of Analysis Ready Data (ARD) and defining its requirements as CEOS ARD for Land (CARD4L). In ARD, a mask called an Unusable Data Mask (UDM), identifying unnecessary pixels for land analysis, should be provided with a satellite image. UDMs include clouds, cloud shadows, terrain shadows, etc. Terrain shadows are generated in mountainous terrain with large terrain relief, and these areas cause errors in analysis due to their low radiation intensity. previous research on terrain shadow detection focused on detecting terrain shadow pixels to correct terrain shadows. However, this should be replaced by the terrain correction method. Therefore, there is a need to expand the purpose of terrain shadow detection. In this study, to utilize CAS500-4 for forest and agriculture analysis, we extended the scope of the terrain shadow detection to shaded areas. This paper aims to analyze the potential for terrain shadow detection to make a terrain shadow mask for South and North Korea. To detect terrain shadows, we used a Hill-shade algorithm that utilizes the position of the sun and a surface's derivatives, such as slope and aspect. Using RapidEye images with a spatial resolution of 5 meters and Sentinel-2 images with a spatial resolution of 10 meters over the Korean Peninsula, the optimal threshold for shadow determination was confirmed by comparing them with the ground truth. The optimal threshold was used to perform terrain shadow detection, and the results were analyzed. As a qualitative result, it was confirmed that the shape was similar to the ground truth as a whole. In addition, it was confirmed that most of the F1 scores were between 0.8 and 0.94 for all images tested. Based on the results of this study, it was confirmed that automatic terrain shadow detection was well performed throughout the Korean Peninsula.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.501-504
• /
• 2007

선구조 밀도에 따른 지열류량 분포 특성을 파악하기 위하여 선구조의 빈도 및 연장에 의한 선구조 밀도 분포도를 각각 작성하고, 측정 위치별 지열류량 값과 비교 분석하였다. 두드러진 단층의 발달과 많은 온천이 분포하는 경상분지 남부를 연구 대상지역으로 하였으며, 음영기복도 및 위성영상으로 부터 1km 이상되는 1337개의 선구조를 추출하였고, 빈도및 길이에 따른 선구조 분포 밀도도를 작성하였다. 연구 지역 내 51개의 지열류량 자료를 이용하여 측정위치별 선구조 밀도 값을 획득하고 지열류량 값과의 상관성을 파악하기 위하여 선형회귀 분석을 실시하였다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.3
• /
• pp.61-74
• /
• 2016

The purpose of this paper is to analyze the relationship between the location of the epicenter of a medium-sized earthquake(magnitude 4.8) that occurred on January 20, 2007 in the Odaesan area with lineament features using a shaded relief map(1/25,000 scale) and satellite images from LANDSAT-8 and KOMPSAT-2. Previous studies have analyzed lineament features in tectonic settings primarily by examining two-dimensional satellite images and shaded relief maps. These methods, however, limit the application of the visual interpretation of relief features long considered as the major component of lineament extraction. To overcome some existing limitations of two-dimensional images, this study examined three-dimensional images, produced from a Digital Elevation Model and drainage network map, for lineament extraction. This approach reduces mapping errors introduced by visual interpretation. In addition, spline interpolation was conducted to produce density maps of lineament frequency, intersection, and length required to estimate the density of lineament at the epicenter of the earthquake. An algorithm was developed to compute the Value of the Relative Density(VRD) representing the relative density of lineament from the map. The VRD is the lineament density of each map grid divided by the maximum density value from the map. As such, it is a quantified value that indicates the concentration level of the lineament density across the area impacted by the earthquake. Using this algorithm, the VRD calculated at the earthquake epicenter using the lineament's frequency, intersection, and length density maps ranged from approximately 0.60(min) to 0.90(max). However, because there were differences in mapped images such as those for solar altitude and azimuth, the mean of VRD was used rather than those categorized by the images. The results show that the average frequency of VRD was approximately 0.85, which was 21% higher than the intersection and length of VRD, demonstrating the close relationship that exists between lineament and the epicenter. Therefore, it is concluded that the density map analysis described in this study, based on lineament extraction, is valid and can be used as a primary data analysis tool for earthquake research in the future.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.233-241
• /
• 2016

Experiments were carried out to quantify the topographic effects on attenuation of sunshine in complex terrain and the results are expected to help convert the coarse resolution sunshine duration information provided by the Korea Meteorological Administration (KMA) into a detailed map reflecting the terrain characteristics of mountainous watershed. Hourly shaded relief images for one year, each pixel consisting of 0 to 255 brightness value, were constructed by applying techniques of shadow modeling and skyline analysis to the 3m resolution digital elevation model for an experimental watershed on the southern slope of Mt. Jiri in Korea. By using a bimetal sunshine recorder, sunshine duration was measured at three points with different terrain conditions in the watershed from May 15, 2015 to May 14, 2016. The brightness values of the 3 corresponding pixel points on the shaded relief map were extracted and regressed to the measured sunshine duration, resulting in a brightness-sunshine duration response curve for a clear day. We devised a method to calibrate this curve equation according to sky condition categorized by cloud amount and used it to derive an empirical model for estimating sunshine duration over a complex terrain. When the performance of this model was compared with a conventional scheme for estimating sunshine duration over a horizontal plane, the estimation bias was improved remarkably and the root mean square error for daily sunshine hour was 1.7hr, which is a reduction by 37% from the conventional method. In order to apply this model to a given area, the clear-sky sunshine duration of each pixel should be produced on hourly intervals first, by driving the curve equation with the hourly shaded relief image of the area. Next, the cloud effect is corrected by 3-hourly 'sky condition' of the KMA digital forecast products. Finally, daily sunshine hour can be obtained by accumulating the hourly sunshine duration. A detailed sunshine duration distribution of 3m horizontal resolution was obtained by applying this procedure to the experimental watershed.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.327-332
• /
• 2006

본 연구의 목적은 GIS 공간분석을 이용하여 음영에 따른 노면결빙예상구간을 정량적으로 평가하는데 있다 산악지역의 도로는 절토 및 터널구간이 많아서 겨울철에는 결빙구간이 발생될 우려가 있으며, 이는 교통 안전사고를 크게 야기시킬 수 있다. 따라서 도로의 기본설계에서부터 각 구간에서의 일조 환경 및 노면결빙예상구간을 정량적으로 정확하게 예측할 수 있는 분석이 필요하다. 본 연구에서는 동해고속도로 중 약 29km구간에 대하여 3차원 모델링, 일조 시뮬레이션, 지오데이터베이스 구축, GIS 중첩 기능에 의한 공간분석을 통해 노면결빙 예상구간을 추출할 수 있었다. 연구결과, GIS를 이용할 경우 기상조건 별로 도로의 일조영향에 따른 노면결빙 예상구간을 정량적으로 추출할 수 있었으며, 연구대상지역 중 상당한 구간이 결빙의 위험에 노출되어 있음을 알 수 있었다. 또한 GIS를 이용한 렌더링 기법이 기존의 음영기복 방법보다 정확하며, 3차원 상에서 그림자의 변화를 시각적으로 판단할 수 있음을 알 수 있었다. 향후 본 논문이 도로관련 법제도상의 노면결빙구간에 대한 규정을 제정하는데 크게 이바지할 수 있을 것으로 생각되며, 도로 설치 구조물의 배치 및 도로포장의 종류 등을 고려한 추가적인 음영구간추출 연구가 필요하다고 판단된다.

• Journal of Korean Society of Forest Science
• /
• v.98 no.6
• /
• pp.639-645
• /
• 2009

The objective of this research was to introduce the TPI approach for interpreting land-forms of mountain forests in South Korea. We develop an objective procedure to decide the scale factor as a basic analytical unit in land-form classification of rugged mountain areas using TPI. In order to determine the scale factor associated with the pattern of slope profiles, the gradient variance curve was derived from a revised hypsometric curve developed using the relief energy of topographic profiles. Using the gradient variance curve, found was the grid size with which the change in relief energy got the peak point. The grid size at the peak point was determined as the scale factor for the study area. In order to investigate the performance of the procedure based on the gradient variance curve, it was applied to determination of the site-specific scale factors of 3 different terrain conditions; highly-rugged, moderately-rugged and relatively less-rugged. The TPI associated with the corresponding scale factors by study site was, then, determined and used in classifying the land-forms. According to the results of this study, the scale factor gets shorter with more rugged terrain conditions. It was also found that the numbers of valleys and ridges estimated with TPI show almost the same trends as those of the observed and the scale factors tends to approach to the mean distance of ridges.