• The Journal of Internal Korean Medicine
• /
• v.39 no.4
• /
• pp.463-470
• /
• 2018

Objectives: The aim of this study was to identify the validity of phase angle as a prognostic factor for survival in patients with metastatic cancer. Methods: Data of patients with metastatic cancer who visited the Korean medicine cancer center at Kyung Hee University Hospital in Gangdong from April 2016 to February 2018 were collected for this study. The values of phase angle (PhA) and blood hemoglobin (Hb), C-reactive protein (CRP), and serum albumin levels were also investigated by bioelectrical impedance analysis (BIA). Results: In total, 86 patients were analyzed. The cut-off value of the phase angle was determined as 5.0. Univariate and multivariate analysis revealed that phase angle (HR 3.15, 95% CI 1.79-5.54) and CRP (HR 2.15, 95% CI 1.24-3.73) predicted survival with statistical significance. The median overall survival of the low PhA group ($PhA{\leq}5.0$) was 1.8 months (95% CI 0.6-2.9 months) and 7.2 months (95% CI 5.2-9.2 months) in the high PhA group (PhA>5.0)(p<0.001). Conclusions: The phase angle could be an independent prognostic factor for patients with metastatic cancer. Further research is required to confirm these findings and their correlation with other indexes.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.5
• /
• pp.1176-1184
• /
• 2007

Chunmagudeungeumgamibang(CGE) has been used for many years as a therapeutic agent for acute stage of cerebrovascular disease and hypertension in oriental medicine. But the effect of CGE on hypertension and vascular system is not well-known. This study was done to investigate the effects of CGE on hypertension. The results were obtained as follow : CGE showed a safety in cytotoxicity and toxicity of liver. CGE showed scavenging activity on DPPH free radical. CGE showed the inhibitory effect on ROS and ACE. CGE significantly decreased the blood pressure and pulse in DOCA-salt hypertensive rat. CGE significantly decreased the levels of aldosterone in DOCA-salt hypertensive rat. CGE significantly decreased the levels of dopamine, epinephrine in DOCA-salt hypertensive rat. CGE significantly decreased the levels of potassium and chloride in DOCA-salt hypertensive rat. CGE significantly increased the levels of calcium in DOCA-salt hypertensive rat. These results suggest that CGE might be effective in treatment and prevention of hypertension

• Korean Journal of Pharmacognosy
• /
• v.50 no.4
• /
• pp.253-259
• /
• 2019

Chaenomeles speciose Nakai (CSP) or Chaenomeles sinensis Koehne (CSS) (Rosaceae) has been used, traditionally, to treat muscle problems and gastric dampness in eastern Asia countries. Therefore, many studies have focused on investigating its active compounds and effects on muscle pain, arthritis and gastro-intestinal diseases. Recently, several studies reported that CSS extract degrade amyloid plaques and enhance synaptic acetylcholine level in vivo and in vitro. Although these two Chaenomeles species are used without differences, CSP is reported to contains more phenolic compounds which are known to enhance memory. Therefore, in this study, we investigated the memory ameliorating effects of CSP by employing the passive avoidance test, Y-maze task and novel object recognition test. CSP (30 or 100 mg/kg) ameliorated the declined memory induced by scopolamine injection and enhanced the brain-derived neurotrophic factor (BDNF) levels along with post synaptic density protein 95 (PSD 95) levels at the hippocampus of the scopolamine-injected mouse brain. These results suggested that CSP alleviates the cognition declines caused by cholinergic blockade via enhancing BDNF levels and PSD 95, and that it would enhance memory formation and be useful for treating memory declines.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.903-906
• /
• 2005

The purpose of this study was to analyze the muscular force of swing using the soft golf club in comparison with the muscular force of swing using normal golf club. The subject was normal adult (twenties) and performed swing motion using normal and soft golf club. And then we compared muscular power soft golf club with normal golf club of the subject. The muscular power of the subject was measured by MP 100(BIOPAC Systems, Inc.). For the analysis of muscular power of swing using soft golf club, we measured EMG(Electromyography) of the subject. The position of muscle was deltoid, latissimus dorsi, external oblique and rectus abdominis of the upper limbs and rectus femoris, biceps femoris, gastrocnemius and soleus of the lower limbs. The result of experiment, muscle pattern of swing using soft golf club was similar to pattern of swing using normal golf club and muscular power of subjects using the soft golf was smaller than normal golf.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.265-276
• /
• 2003

The objective of this research is to provide basic data for improving athletic performances, suggesting methods that can be utilized at games and coaching movements in the snatch, by analyzing the level of contribution of muscles to the movements of the snatch lift through three-dimensional imaging and EMG analysis between skilled and unskilled lifters. To this end, three high school students (the skilled group), three middle school student (the unskilled group) were selected; two digital video cameras and electromyography were used. The muscles measured by an EMG include gastrocnemius muscle, biceps femoris muscle, erector spinae, latissimus dorsi muscle, trapezius muscle, and brachioradialis. Based on the Ariel Performance Analysis System (APAS) program, the results of the analysis are summarized as follows. 1. In performing snatch pulls, the skilled lifters were found to simultaneously move the weight centers of the body and the barbell close to vertical, close to the shoulders in the pulling portion; in snatching and grabbing the barbell from a sited position, it was observed that the shorter the time for adjusting to change in the height of the barbell by using rotational inertia, the better it is to perform the movements. 2. The skilled lifters were observed to perform stable and efficient movements in grabbing the bar in a sited position, by moving the barbell and weight center of the body close to vertical and moving the shoulder joint under the bar fast. 3. The results of the EMG analysis of the entire movements from the snatching portion to the portion of grabbing the bar in a sited position show that when the skilled lifters lifted the barbell vertically during the pulling portion, their shoulder joints were extended to put more weight on biceps femoris muscle and brachioradialis; and in snatching and grabbing the bar from a sited position, it was found desirable to increase the myoelectrical activity of erector spinae in order to achieve a balance in the movements of the hip joint between font and rear, as the weight centers of the body and the barbell move higher. On the other hand, the unskilled lifters were found that in response to change in posture, they increase their muscular strength inefficiently in performing the movements throughout the entire lifting process.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.7
• /
• pp.73-80
• /
• 2013

Fine suspended solids from coal mine drainage were treated in the treating plant, using two different pilot-scale inclined clarifiers: radial and lamella types. Suspended solids in the mine drainage were monitored along with other geochemical factors, and metal contents. Fe and Mn are the main chemical components in the drainage, which exist predominantly as total metal forms, whereas dissolved portion is negligible. The raw mine drainage is subject to physical and chemical treatment using $CaCO_3$ and NaOH, therefore the suspended solids are thought to be composed of Fe and Mn precipitates, possibly $Fe(OH)_3$, along with carbonate precipitates. The elemental composition of precipitates are confirmed by SEM-EDS analysis. As nearly all the dissolved ions were precipitated in the primary process by $CaCO_3$, no further aeration or prolonged oxygenation are of necessity in this plant. Adoption of inclined clarifier proved to be effective in treating fine suspended solids in the current plant. Successful application of the inclined clarifier will also be beneficial to improve the current treating process by excluding the current application of chemical agent in the first stage. The final effluents from the pilot plant meet the national standards and the low dissolved Fe and Mn contents are expected not to cause secondary precipitation after discharge.

• Journal of Welding and Joining
• /
• v.33 no.2
• /
• pp.8-13
• /
• 2015

This study was carried out to evaluate mechanical properties of the jointed Al6061/HT590 alloys by friction stir welding (FSW). FSW was conducted under the conditions with tool rotating speed of 500 RPM and traveling speed of 300 mm/min., where Ar gas was introduced to prevent the materials from corrosion during the welding process. Electron back-scattering diffraction (EBSD) was used to characterize microstructures such as grain size, misorientation angle and crystal orientation. Evolution of intermetallic compounds in Al6061 during the process were examined in terms of morphology, size and aspect ratio at three distinct zones Al base material, heat affected zone and stir zone, where transmission electron microscope (TEM) was used. It was revealed that FSW gave rise to refinement of grains as well as growth of intermetallic compounds in Al6061. The morphological changes of intermetallic compounds exerted an influence on mechanical properties, resulting in occurrence of fracture in the part of the base material instead of the jointed parts (heat affected zone and stir zone). This study systematically evaluated the microstructural evolutions during the FSW for joining Al6061 with HT590 and their effect on mechanical properties.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.5-13
• /
• 2016

This study investigated the effects of different factors on the migration of a fluorescent whitening agent (FWA) from paper treated with FWAs to non-fluorescent papers. FWA migration experiments were carried out in vertical and friction contacts between the papers dyed with FWAs and non-fluorescent papers. During the experiments, we identified the effects of the addition and types of FWAs, contact time, temperature, and relative humidity (RH) on FWA migration. The fluorescence indices of the non-fluorescent papers were measured before and after the migration experiments, and the Student's t test, a statistical tool, was utilized to compare results from different migration experiments. In vertical contact experiments, FWA migration to non-fluorescent paper was observed at $30^{\circ}C$ and 70% RH; this was attributed to the high moisture content of the paper. FWA migration did not occur significantly at $23^{\circ}C$ and 50% RH. In the friction contact experiments, FWA migrations were identified at both temperature conditions and RH percentages. The addition and types of FWAs did not increase the fluorescence index of non-fluorescent papers. Therefore, it was concluded that the moisture content of paper and the friction contact affected FWA migration from the papers containing internal and surface FWAs.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.51-56
• /
• 2016

The most widely used glue in a corrugator is starch, which is a natural polymer. This material needs thermal energy to achieve a binding force, so a heating section is installed in a corrugator. However, this heating section can cause quality problems in linerboards and corrugating medium and increase the production cost because of the high cost of fossil resources. Therefore, a new adhesive that provides the binding force at lower temperatures than the conventional one must be developed. In this study, SB-latex was selected as a co-adhesive and added to the starch solution. The addition of the SB-latex was determined based on the viscosity of the new adhesive. The adhesive strength and the drying energy reduction of a corrugated board were measured to evaluate the functionalities of the new adhesive. The addition of SB-latex was determined to be under 20% of the oven-dried starch based on the viscosity of the new adhesive. The adhesive strength was improved and the drying energy was reduced by applying the new adhesive.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4954-4961
• /
• 2010

Background: Competition among hospitals has intensified, because hospitals and beds are oversupplying and the global medical market has opened in Korea. Method: we developed questionnaires of the patient's satisfaction about 20 items. We surveyed 297 out-patients and 302 in-patients. We analyzed the descriptive statistics and regression by SPSS(Version 17) and Excel. Results: The relations with the patient's loyalty and the specialized hospital service are 1) Recommend to other person: FHR use and the assistant for follow-up treatment were related positively for out-patient and PHR and FHR use were related positively for out-patient. 2) Revisiting: PHR use and the need of an assistant for follow-up patients were related for them and the PayTV were negatively related. Conclusion: FHR, PHR and assistant system for follow-up patient's condition were very useful factors to increase patient's loyalty.