• Korean Journal of Agricultural Science
• /
• v.15 no.1
• /
• pp.82-94
• /
• 1988

This study was performed to obtain the basic data which can be applied to use of foaming mortars. The results obtained were summarized as follows ; 1. The lowest water-cement ratios were shown at the mixing ratio of 1 : 1. But, it was gradually increased in poorer mixing ratio and decreased in more addition of foaming agent. The water-cement ratios were decreased up to 1.6-53.1% by mix-foaming type and 4.4-24.1% by pre-foamed type than cement mortar. 2. The highest bulk densities were shown at the mixing ratio of 1 : 1. But, it was gradually decreased in poorer mixing ratio and more addition of foaming agent. The decreasing rates of bulk densities were increased in richer mixing ratio and more addition of foaming agent. 3. The bulk densities were decreased up to 38.8-55.9% by mix-foaming type and 9.7-23.6% by pre-foamed type than cement mortar. 4. The lowest absorption rates were shown at the mixing ratio of 1 : 1. But, it was gradually increased in poorer mixing ratio and more addition of foaming agent. The increasing rates of absorption rates were increased in richer mixing ratio and more addition of foaming agent. 5. Absorption rates when immersed in 72hours were shown up to 3.41-5.85 times greater by mix-foaming type and 1.05-1.55 times greater by pre-foamed type than those of cement mortar. it was significantly higher at the early stage of immersed time than cement mortar. 6. The highest strengths were shown at the mixing ratio of 1 : 1. But, it was gradually decreased in poorer mixing ratio and more addition of foaming agent. The decreasing rates of strengths were increased in poorer mixing ratio and more addition of foaming agent. 7. The strengths were decreased up to 77.0-92.8% by mix-foaming type and 36.7-74.4% by pre-foamed type than cement mortar. 8. The lowest air contents were shown at the mixing ratio of 1 : 1. But, it was gradually increased in poorer mixing ratio and more addition of foaming agent. The increasing rates of air contents were increased in richer mixing ratio and more addition of foaming agent. 9. Air contents were shown up to 26.0-63.8 times greater by mix-foaming type and 5.8-17.7 times greater by pre-foamed type than those of cement mortar. 10. The correlations between bulk density, absorption rate, compressive strength and air content were highly significant. The multiple regression equations of bulk density, absorption rate, compressive strength, tensile strength, bending strength and air content were computed depending on a function of mixing ratio and addition of foaming agent. They were generally highly significant.

• Journal of Veterinary Clinics
• /
• v.28 no.6
• /
• pp.576-580
• /
• 2011

Silver has potent antibacterial activity against a variety of bacteria while maintaining low toxicity in mammalian cells. This study was conducted to investigate the possible mechanism underlying the bactericidal effects of silver ions against bovine mastitis pathogens using electron microscopy. We used two different bacterial strains, Escherichia coli and Staphylococcus aureus, which are primarily responsible for the majority of bovine mastitis cases. Interaction between the bacteria and silver ions (50 ${\mu}g/mL$, 2 hours) were studied using energy-filtering transmission electron microscopy (EFTEM). EFTEM images showed that E. coli and S. aureus cells treated with the silver ions had distorted plasma membranes, silver ions attached to the outer membranes, scattered electron-light material, and leakage of cell contents from disrupted cell membranes.

• The Korean Journal of Mycology
• /
• v.20 no.1
• /
• pp.65-71
• /
• 1992

The two isolates of Streptomyces antagonistic to Phytophthora nicotianae var. parasitica and Fusarium oxysporum f. sp. vasinfectum were identified as based on the morphological, cultural and physiological characteristics on various culture media. Spore chains of St-11 isolate was rectus-flexibilis(RF), whereas the other isolate, St-20, was shown rectinaculum-apertum(RA). Spore surface of St-11 isolate was smooth, while St-20 was spiny. Aerial mycelia of the two isolates were all gray color and growing conditions on media were good as a whole. Any soluble pigment was not shown in cultivation of the two isolates. Stoll isolate showed negative response on starch hydrolysis and gelation liquefaction, whereas St-20 isolate was positive on starch hydrolysis and a negative on gelatin reaction. Stoll isolate was identified as Streptomyces bikiniensis and St-20 Streptomyces echinoruber, respectively.

• Microbiology and Biotechnology Letters
• /
• v.30 no.2
• /
• pp.135-141
• /
• 2002

This study was carried out to isolate antagonistic bacterium against Sclerotium cepivorum causing Allium fistulosum white rot. Total of 146 strains were isolated from A. fistulosum roots. The isolates were screened for antagonism to S. cepivorum and the isolated strain No. AL-1 was selected among these bacteria. It was identified as Serratia plymuthica based on morphological and physiological characteristics according to the Bergey's mannual of systematic bacteriology and 16S rDNA sequences methods. Serratia plymuthica AL-1 showed broad spectrum of antifungal activities against plant pathogenic fungi Alternaria altrata, Colletotrichum gleosporioids, Phoma sp., Rhizoctonia solani, Sclerotinia sclerotiorum, Stemphylium solani, Fusarium oxysporium niveum but not inhibited Didymella bryoniae. When S. plymuthica AL-1 cultivated in the TSB medium containing 1％ colloidal chitin, the high molecular fraction (>10 kDa) have chitinase activity (3.2 units/ml) and the low molecular fraction (<10 kDa) have not chitinase activity. Oppositely, after heat treatment (80℃ for 30 min) of the cultivation supernatant, the high molecular fractions have not antifungal activity but the low molecular fractions have antifungal activity.

• Journal of Korean Society of Forest Science
• /
• v.77 no.2
• /
• pp.178-185
• /
• 1988

This study is carried out for analyzing the factors causing several disasters occurring around beach area in order to set a plan for an afforestation which will fulfill its function as facilities for prevention of disasters and for relaxation around beach resort at Tong-ri, Pokil-my$\bar{o}$n, Wando-gun. The results are as follows : 1. The main wind direction was summer was SE. 2. The first class in the rate of frequency of the hourly average wind speed and the instantaneous wind speed in summer were 2.1-3.0m/sec (29.2%) and 1.1-2.0m/sec (30.6%) respectively. 3. The particle sizes of the dune sands was a little small (82.5% in 0.125 to 0.25mm, $D_{50}=0.178mm$). 4. The mineral composition and the chemical components were as follows : The main mineral : Quartz The accessary minerals : Calcite, Feldspars(Orthoclase), Sericite. The chemical components : $SiO_2$ ; 75.6%. $Al_2O_3$ ; 8.1%, CaO ; 7.76%, Ign. loss ; 6.8%, MgO ; 0.23%, $K_2O$ ; 0.72%, $Na_2O$ ; 0.41%, $Fe_2O_3$ ; 0.32%. 5. The threshold friction velocity equation for the diameter class of the dune sands was $y=4.191x^{0.221}$. 6. The amount of floating salt was maximum at the point of 65m away from beach line, dropped abruptly at 135m and remained almost same on its way to the inland. The equation of the amount of floating salt was $y=28.181{\times}(-0.369^x)$. 7. The amount of extracted salt(33%) in seawater in summer was the same as the one of the nearest seawater of Korea.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.4
• /
• pp.282-287
• /
• 1999

This study was conducted to investigate the effects of different soil texture in agronomic characteristics, root yield and quality of baloon flower (Platycodon grandiflorum A. DC.). Three kinds of soil texture, sandy loam, silt loam and clay loam, were tested for two years. Baloon flowers were seeded with 20cm row space and cultivated in the one square meter pot with 0. 6m depth. Fifty plants per pot were remained. In growth characteristics of one-year-old plants, shooting date was not significantly different according to the changes of soil texture. The ratio of stem growth was highest between July and August. In two-years-old plants, it was showed between May and June. Plants grown on clay loam showed the highest growing characteristics than those of other soil textures. Dry root weight cultivated on clay loam was 274kg/10a in one-year-old and 934kg/10a in two-years-old plants. The content of ethanol extracts from root was highest at those of sandy loam as 47.1 % in one-year-old root. The crude saponin content was not different significantly among the three kinds of soil texture.

• Korean Journal of Environmental Agriculture
• /
• v.3 no.2
• /
• pp.30-36
• /
• 1984

This study was to investigate the organophosphorus insecticide residues in crops including five kinds of vegetables and two kinds of fruits. The pesticides investigated in spring-radish, spring Chinese cabbage, cucumber and tomato were diazinon, DEP and malathion, in unripe pepper EPN and PAP, in peach EPN, parathion and demeton-methyl, and in grape EPN, PAP and MEP. All samples were analysed by gas chromatographic technique with NPD detector. No one sample was found to approach proposed national maximum residue limits in Korea.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.936-941
• /
• 2010

This study was conducted to investigate formaldehyde removals by silver nano-particles attached on the surface of granular activated carbon (Ag-AC) and to compare the results to those obtained with ordinary activated carbon (AC). The BET analysis showed that the overall surface area and the fraction of micropores (less than $20{\AA}$ diameter) of the Ag-AC were significantly decreased because the silver particles blocked the small pores on the surface of the Ag-AC. The formaldehyde removal capacity of the Ag-AC determined using the Freundlich isotherm was higher than that of AC. Despite the decreased BET surface area and micropore volume, the Ag-AC had the increased removal capacity for formaldehyde, presumably due to catalytic oxidation by silver nano-particles. In contrast, the adsorption intensity of the Ag-AC, estimated by 1/n in the Freundlich isotherm equation, was similar to that of the ordinary AC, indicating that the surface modification using silver nano-particles did not affect the adsorption characteristics of AC. In a column experiment, the Ag-AC also showed a longer breakthrough time than that of the AC. Simulation results using the homogeneous surface diffusion model (HSDM) were well fitted to the breakthrough curve of formaldehyde for the ordinary AC, but the predictions showed substantial deviations from the experimental data for the Ag-AC. The discrepancy was due to the catalytic oxidation of silver nano-particles that was not incorporated in the HSDM. Consequently, a new numerical model that takes the catalytic oxidation into accounts needs to be developed to predict the combined oxidation and adsorption process more accurately.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.10-16
• /
• 2016

This work investigates the size and dispersion characteristics of silver nanoparticles synthesized by a liquid phase reduction method using PAA. The experimental variables were the molecular weight and doses of the PAA, reducing agent, dispersant, and organic solvent (ethanol-acetone). UV-visible spectrophotometer results confirm the formation of the silver particles, and SEM indicates size in the nanometer range. As the ultrasonication time increases, there is a tendency toward smaller agglomerates of nanoparticles. The agglomerates were dispersed into 1-5 agglomerates of particles by ultrasonication for 3 hours or more. Relatively spherical nanoparticles were produced with a completely homogeneous dispersion and size of 49.56-85.75 nm by ultrasonication using BYK-192, a dispersant containing copolymer with a pigment affinic group. The average size of the silver nanoparticles was increased to 36.82, 50.66, and 56.06 nm with increasing molecular weight of PAA. Also, the size of the nanoparticles increased with the capping of PAA on the surfaces of the nanoparticles when increasing the amount of PAA. The addition of hydrazine as a reducing agent produced relatively small particles because many nuclei were created by the reduction reaction. The ethanol-acetone solvent helped with the regular arrangement of the silver nanoparticles.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.4
• /
• pp.183-188
• /
• 1975

Effects of air temperature and 50% shading for 20 days at each growth stages (from 33days before heading, from heading and from 20days after heading) on the productivity of Tongil (IR667-Suweon 214) and Jinheung rice (Oriza sativa.) were as follows. 1. Shading decreased yield by 48, 98 and 18% for Tongil and 73.71 and 12% for Jinheung during ear formation, heading and milky stage, respectively. 2. Shading most severely affected filled-grain ratio in both varieties except shading during milky stage of Jinheung that more affected grain weight. 3. Optimum mean air temperature for maximum crop growth rate appears to be $25^{\circ}C$ and clitical temperature $22^{\circ}C$ for Tongil but these for Jinheung seem to be lower. Solar radiation greater than $300cal/cm^2$ day appears to be enough. 4. Maximum crop growth rate of Tongil always advanced that of Jinheung. 5. Tropical Tongil variety appeared to be more tolerant to high temperature and low solar radiation before heading than temperate Jinheung. Thus Tongil will be more productively adapted to the high temperature-low solar radiation period in rice season which mostly overlaps with ear formation stage.