• Journal of the Korean GEO-environmental Society
• /
• v.3 no.1
• /
• pp.13-26
• /
• 2002

In this study, column diffusion tests for Cd and Zn were conducted at $15^{\circ}C$ and $55^{\circ}C$ to investigate a temperature effect on effective diffusion coefficient. An increase in temperature from $15^{\circ}C$ to $55^{\circ}C$ caused up to ten times larger diffusion coefficient for each heavy metal. Besides, it caused the increased retardation of heavy metals, and hence the effective diffusion coefficient should be overestimated as we use an overestimated retardation factor to calibrate the coefficient. The results of sequential extraction analyses showed that Zn was occluded in carbonate phase and this trend was getting prominent with the increase in temperature. As for Cd, it was partitioned mainly in the exchangeable phase(over 60%) at any temperature.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.2
• /
• pp.171-178
• /
• 2007

Diffusion and accumulation of ethoprophos in fruit such as apple and two types of pears were examined by dipping them into the solution of ethoprophos. The effective diffusivities of ethoprophos at the skin and flesh of apple and pear were determined by simulation their experimental accumulation curves with calculated ones from the model assuming consecutive diffusion of ethoprophos from skin to flesh. Its effective diffusivity at the flesh with higher content of water were higher, $\sim10^{-10}\;m^2/s$, regardless of the types of fruits, while that at the skin was small, $\sim10^{-12}\;m^2/s$ and increased with the order of 'Niitaka' pear < 'Whangkeumbae' pear < 'Fuji' apple. The variation in the concentration of ethoprophos in its solution did not induce any change in affecting its effective diffusivity at the flesh of 'Whangkeumbae' pear, but the increase in the concentration caused the increase in its effective diffusivity at the skin. The penetration rate of ethoprophos at the skin was an important factor in determining its accumulation rate in fruit.

• Journal of Korea Soil Environment Society
• /
• v.1 no.2
• /
• pp.83-90
• /
• 1996

A diffusion process is often the main mechanism of soil gas/vapor movement in the vadose zone. The diffusion coefficients in the porous soil media are different from those in the free air phase by the reduction of available area for diffusion, tortuous diffusion path and variable cross section area along the diffusion path. To take account those effects of the diffusion process in the porous media, usually the terms of effective diffusion coefficient and tortuosity are have been used. However, as there are many differents definitions for the tortuosity, when the term of tortuosity is used, it is necessary to examine it throughly. Moreover, there are many different equations for the effective diffusion coefficient according to the investigators and the differences in the values of effective diffusion coefficients between the equations are not insignificant, the selection of the equation should be done with caution. In this paper, the different definitions of effective diffusion coefficient are examined and discussed. As well as definitions, the lots of availabe models for the diffusion coefficient in terms of porosities are compared. Also, the constrictiviy which explains the effect of cross sectional area change over the diffusion path was discussed.

• Nuclear Engineering and Technology
• /
• v.26 no.2
• /
• pp.285-293
• /
• 1994

The transport of radionuclides in a compacted bentonite is dominated by diffusion. Through-diffusion tests for iodide were performed to investigate the diffusion characteristics of anionic radionuclides in a domestic bentonite. The bentonite used was sampled from the southeastern area of Korea and the solution was synthetic groundwater spiked with a tracer of I -125(as Na$^{125}$ I). The dry densities of compacted bentonite were 1.2, 1.4, and 1.7 Mg/㎥. The apparent diffusion coefficients and the effective diffusion coefficients of the iodide decrease with increasing dry density. The values were from 3.80 to 7.12$\times$10$^{-11}$ $m^2$/s for the apparent diffusion coefficients and from 1.25 to 7.97$\times$10$^{-12}$ $m^2$/s for the effective diffusion coefficient, respectively. The experimental results also showed that the apparent diffusion coefficients depended on the pore structure of compacted bentonite and the effective diffusion coefficients were attributed to the pore structure and the effective porosity that represents the available pathway for the diffusional transport of iodide. The results obtained will be used as basic data for the safety assessment of a repository.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.2
• /
• pp.154-160
• /
• 1982

One dimensional unsteady heat conduction was studied on soybean curd as a water-protein-fat food system. This heterogeneous soybean curd could be treated as homogeneous material as for the unsteady heat conduction by 'effectiver' thermal diffusivity. Measurements were made with a apparatus designed and constructed by the author and also made with ice to establish the reliability, the reproducibility and the accuracy of the apparatus. It was found that the effective thermal diffusivity of soybean curd was substantially dependent on the fraction of protein and fat as well as water.

• Journal of the Korean Vacuum Society
• /
• v.2 no.1
• /
• pp.50-57
• /
• 1993

이원계 박막확산쌍에서 열처리 방법에 의한 고상 비정질화 반응의 경향성을 예측하기 위하여 유효 구동력 개념을 제시하였다. 고상 비정질화 반응은 두 원소의 물리적 혼합물과 비정질상간의 최대 자유에너지차로 주어지는 열역학적 구동력(ΔGmax)과 확산원소의 원자반경에 대한 기지의 유효 침입형자리 반경의 비로 주어지는 구조적 요소(Rm/d)가 충족될 때 일어나는 빠른 확산에 의하여 발생된다고 고찰하고, 유효 구동력 기준을 이용하여 금속/금속계 뿐만 아니라 금속/실리콘 계의 고상반응에 의한 비정질상 생성 경향성을 예측하고 실험결과들과 비교하여 잘 적용됨을 보였다. 또한, 유효 구동력 기준이 금속/실리콘 계에서 비정질상의 임계 성장두께 경향성의 예측에도 잘 적용됨을 보였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.689-695
• /
• 2016

The performance of proton exchange membrane fuel cells (PEMFC) is strongly related to the water flow and accumulation in the gas diffusion layer (GDL) and catalyst layer. Understanding the behavior of fluid from the characteristics of the media is crucial for the improvement of the performance and design of the GDL. In this paper, a numerical method is proposed to calculate the design parameters of the GDL, i.e., permeability, tortuosity, and effective diffusivity. The fluid flow in a channel filled with randomly packed hard spheres is simulated to validate the method. The flow simulation was performed by lattice Boltzmann method with bounce back condition for the solid volume fraction in the porous media, with different values of porosities. Permeability, which affects the flow, was calculated from the average pressure drop and the velocity in the porous media. Tortuosity, calculated by the ratio the average path length of the randomly injected massless particles to the thickness of the porous media, and the resultant effective diffusivity were in good agreement with the theoretical model. The suggested method can be used to calculate the parameters of real GDL accurately without any modification.

• KSBB Journal
• /
• v.4 no.2
• /
• pp.110-117
• /
• 1989

The fiffusion characteristics of substrate of varing biomass concentrations into and from Ca- alginate gel beads in well-stirred solutions were investigated. Ca-alginate gel beads were immobilized by Zymomonas mobilis or free from cells. The values of the diffusion coefficient of substrate were calculated by means of the method of Least squares and Random pore model. Reaction rates are expressed by the Michaelis-Menten type equation, and the results are compared with experimental data. Intraparticle effective diffusivity of substrate resistance on reaction by using immobilized Z.mobilis entrapped by Ca-alginated gel seemed to be restricted by cell density. The experimental data also indicated relationship between the effective diffusivity and the cell concentration used in the gel preparation.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.1
• /
• pp.33-40
• /
• 2011

In the compacted bentonite containing $Ag_2O$, the transport of iodide ion was investigated by Through-diffusion method. It is confirmed that Iodide ion is transported by diffusion process in the compacted bentonite containing $Ag_2O$ as well as in the compacted bentonite without $Ag_2O$. However, the lag-time of iodide ion in the compacted bentonite containing $Ag_2O$ is larger than that in the compacted bentonite without $Ag_2O$. The increase of the lag-time was observed in pure iodide ion solution and also in 0.1M NaCl-iodide ion solution. The apparent diffusion coefficient of iodide ion in the compacted bentonite containing $Ag_2O$ has lower value than that in the compacted bentonite without $Ag_2O$. The effect of $Ag_2O$ on the effective diffusion coefficient was not clearly investigated in the compacted bentonite containing $Ag_2O$ while the values of effective diffusion coefficient of iodide ion in the compacted bentonite without $Ag_2O$ obtained in this study were similar to those in the compacted bentonite reported in the literature.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.242-245
• /
• 2009

The effect of fuel composition on flame length was studied in a non-premixed turbulent diluted hydrogen jet with coaxial air. The observed flame length was expressed as a function of the ratio of coaxial air to fuel jet velocity and compared with a theoretical prediction based on the velocity ratio. Four cases of fuel mixed by volume were determined. In the present study, we derived a scaling correlation for predicting the flame length in a simple jet with coaxial air using the effective jet diameter in the near-field concept. The experimental results showed that visible flame length had a good relation with the theoretical prediction. The scaling analysis is also valid for diluted hydrogen jet flames with varied fuel composition.