• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.391-396
• /
• 2006

When radioactive wastewater was solidified treatment by cement, the drying rate of cement and the volume reduction ratio was decreased because of boric acid component in the wastewater. In order to supplement the demerit, effects of paraffin wax investigated in this study. Paraffin wax has a hydrophobic properties and a low affinity with inorganic materials. When the radioactive wastewater was tested by a small of wax, the compressive strength of solidified waste are decreased Therefore boric acid in radioactive wastewater are first treated by alkali salt and coated by the stearic acid. During the solidification step, The amount of paraffin wax addition get the result that the compressive strength of solidification with cement was the same as that with paraffin wax. The leaching properties of radioactive waste solidified was the same CFL (cumulative fraction leached), PR (penetration rate), effective diffusivity if paraffin wax content in solidified waste was 20% or 25%.

• Analytical Science and Technology
• /
• v.13 no.5
• /
• pp.573-583
• /
• 2000

Activated carbon fibers (ACFs) were prepared from various precursors of plantic, synthetic, and mixed fabrics of viscous rayon and cotton. Their adsorption performances of phenol and methylene blue in aqueous phase were evaluated through their adsorption isotherms, adsorption rates and breakthrough curves. The two adsorbates showed type I adsorption isotherm on ACFs. Adsorption rates to ACFs were 100 fold faster than to GAC. The effective diffusion coefficients of the adsorbates in ACFs were twenty fold greater than in GAC. The ACFs removed completely ten organic pollutants from a prepared water specimens through the 2nd column of a natural filtration method where 50 L of the water samples were treated.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2019

Recently, studies on alkali activated slag(AAS) binders that do not use cement have been actively conducted. It is known that AAS concrete is highly resistant to chloride damage based on the test method used for ordinary concrete. However, it is fully not understood whether the test method used for concrete can be applied to AAS mixtures. Therefore, in this study, we verified the consistency of NT Build 492 and ASTM C 1202 test methods by applying various experimental variables. According to the experimental results, the two tests yielded opposite results. Therefore, the chloride durability of AAS mortar can be different depending on the evaluation method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.2 no.3
• /
• pp.243-255
• /
• 1990

The objective of this study is to present an efficient measurement method of the effective thermal diffusivity for the fibrous insulation material. The non-linear parameter estimation (NPE) method is adapted for this analysis because of its accuracy and its results are compared with those by other direct methods such as CTP, CHP and STD method. A experimental system is constructed with bell-jar vaccum chamber, diffusion pump, tube type furnace, control unit and data acquisition system included with A/D converter and IBM XT/AT personal computer. The typical results obtained from this study are as follows; 1) NPE method can be recommended as an useful and accurate method to measure the effective thermal diffusivity of insuation material because it is shown that the measurement error compared with those by other direct methods is reduced for standard material, NBS-1450b. 2) NPE method can minimize the effects of ill-measured temperature due to external disturbance, because the final value is found by point to point estimating. 3) NPE method dose not depend on the kinds of heat flux, since the surfac temperature are used to estimate the thermal diffusivity. 4) With NPE method, compared with the steady state method, a measuring time and a sample size could be reduced.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.4
• /
• pp.9-17
• /
• 2000

The crystal growth and dissolution rates were calculated by solving a model equation, which involved the dissolution of the metastable phase($\beta$-HNIW) and growth of the stable phase($\varepsilon$-HNIW), together with the mass balance equation. The model has been successfully used to simulate available kinetic data for the $\beta$$\longrightarrow$$\varepsilon$ polymorphic transformation via a solution phase. From the effectiveness factor based on the two-step model, it was found that the surface integration contribution to the process was comparatively small, and a diffusion dependency decreased with an increase of the mass fraction of chloroform in the mixed solvents of ethyl acetate and chloroform. Appling these kinetics in process simulation allowed for the prediction of the product size of $\varepsilon$-HNIW.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.657-662
• /
• 2004

The kinetics of oxidation and disappearance of graphite in MgO-C refractories containing TiC were, in the temperature range from 1000 to 1200$^{\circ}C$, investigated to enhance the oxdation resistance of MgO-C refractproes. The air was blown into the furnace at flow rate of 0.2 litters per minute, and then weight decrease was measured with a thermo balance at 30 seconds intervals until the value of weight became unchanged. The value of effective diffusion coefficient (De) for the specimen of MgO-C was 1.39${\times}$10$\^$-4/ ㎡/sec. The diffusion of oxygen through decarburized layer was the rate deforming step in the overall oxidation process under present experimental conditions. The TiC additions enhanced the oxidation resistance of the MgO-C refractories.

• Journal of the Korean Society of Groundwater Environment
• /
• v.4 no.1
• /
• pp.54-59
• /
• 1997

The river and groundwater are contaminated by pollution source of a waste landfill and others near river. The contaminant transport and response of aquifer parameters are studied in the aquifer affected by variation of river stage. First, the equation for component of variation velocity with river stage is developed by using the analytical solution of groundwater governing equation. The numerical model which considered component of variation velocity is constructed for the transport of mass by advection and dispersion. In order to verify a numerical scheme, the analytical solution is used. The numerical solution is coincided with the analytical one. Aquifer parameters of Nanjido are used as the data for numerical experiment. Second, the range of aquifer parameters is established in order to reponse contaminant transport in aquifer with river stage. The result of numerical experiment shows that the range of the storage coefficient except hydraulic conductivity and effective porosity is relatively sensitive to the contaminant transport. When the storage coefficient is the order of 10$\^$－2/, the response is very sensitive to the variation of river stage.

• Korean Journal of Food Science and Technology
• /
• v.47 no.1
• /
• pp.56-62
• /
• 2015

Various pretreatment methods were evaluated to prevent tissue softening of heated onion. Changes in onion tissue firmness during heating were explained by 3-mechanism model consisting of texture hardening at low temperature ($60-80^{\circ}C$) and substrate softening at high temperature. Preheating of onion in a $Ca^{2+}$-containing solution significantly improved its texture after high-temperature heating. The improvement of firmness by preheating at low temperature was related to the formation of strong cross-linking between carboxyl groups and $Ca^{2+}$ by the action of pectin methylesterase in onion. The highest firmness was obtained by pre-heating at $70^{\circ}C$ for 120 min in 0.5% calcium solution. This result was supported by chemical analysis showing that the amount of bound calcium was the highest at $70^{\circ}C$. Further investigation should be carried out to establish the optimal conditions to prevent the softening of various vegetables.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.39-45
• /
• 2016

In this paper, prcess modeling of germanium condensation has been performed and a germanium PMOSFET having nanowire channel implented by the condensation process has been designed and characterized by device simulations. Based on the previous experimental results, our modeling results demonstrate that the ratio of germanium concentration at the silicon germanium-silicon dioxide interface ($C_S$) to that in the bulk region ($C_B$) which are obtainable during the germanium condensation is approximately 4.03 and the effective diffusion coefficient ($D_{eff}$) of germanium atom is $3.16nm^2/s$. Furthermore, a germanium nanowire-channel PMOSFET having the ultra-thin germanium channel on the silicon core that can be fabricated by the germanium condensation has been designed and characterized. As the result, it is confirmed that the proposed device having the coaxial nanowire consisting of silicon core and germanium channel might have superior performances over the device with either all-silicon or all-germanium channel.

• Clean Technology
• /
• v.20 no.3
• /
• pp.290-297
• /
• 2014

Batch adsorption studies were carried out for equilibrium, kinetics and thermodynamic parameters for adsorption of coomassi brilliant blue G (CBBG) using activated carbon with varying the operating variables like initial concentration, contact time and temperature. Equilibrium adsorption data were fitted into Langmuir, Freundlich and Dubinin-Radushkevich isotherms. From estimated separation factor of Langmuir and Freundlich, this process could be employed as effective treatment for removal of CBBG. Also from Dubinin-Radushkevich isotherm model, adsorption energy (E) indicated adsorption process is physical adsorption. From kinetic experiments, the adsorption reaction was found to confirm to the pseudo second order model with good correlation. Intraparticle diffusion was rate controlling step. Thermodynamic parameters like change of free energy, enthalpy, and entropy were also calculated to predict the nature of adsorption. The change of enthalpy (406.12 kJ/mol) indicated endothermic nature of the adsorption process. The change of entropy (1.66 kJ/mol K) showed increasing disorder in process. The change of free energy found that the spontaneity of process increased with increasing adsorption temperature.