• Title/Summary/Keyword: 유효정화율

Search Result 14, Processing Time 0.024 seconds

Thermal Annealing Condition Dependence of Ion-implanted Silicon Recrystallization (열처리 조건에 따른 이온주입된 실리콘의 재결정화)

  • 이창희;이순일
    • Journal of the Korean Vacuum Society
    • /
    • v.4 no.4
    • /
    • pp.386-393
    • /
    • 1995
  • 이온주입된 실리콘 시료들의 열처리 조건에 따른 재결정화를 분광 타원해석법(Spectroscopic Ellipsometry, SE)을 사용하여 연구하였다. 열처리 후에도 잔류하는 결함들의 양과 분포를 구하기 위한 시료의 층구조 분석에 있어서 손상층의 유효굴절율은 Bruggeman 유효매질이론을 이용하여 구하였으며 기준 비정질실리콘 데이터로서는 완화된 비정질실리콘의 광학상수와 이온주입에 의해서 만들어진 비정질 실리콘의 광학상수를 함께 사용하였다. 조사된 대부분의 열처리 조건하에서 고체상 적층성장(solid-phase epitaxial growth)과정에 따라 비정질층이 재결정화되는 것이 관측되었다.

  • PDF

Numerical Analysis of Effects of the Physical Properties of Soil and Contaminant Materials on In-situ Soil Remediation Using Vertical Drain (토양 및 오염물질의 물성치가 연직배수재에 의한 현장오염정화에 미치는 영향에 대한 수치해석적 연구)

  • Lee, Haeng-Woo;Chang, Pyoung-Wuck
    • Journal of the Korean Geosynthetics Society
    • /
    • v.5 no.2
    • /
    • pp.1-8
    • /
    • 2006
  • The properties of contaminated soil, contaminants and elapsed time are important considering factors to in-situ soil remediation. Gabr et. al. (1996) derived the solution equation of contaminant concentration ratio as initial one ($C/C_0$) with time and spatial changes in contaminated area which are embedded with vertical drains. The contaminant concentration ratio ($C/C_0$) is analyzed with time and spatial changes as varying the effective diameter, porosity, shape factor, density of contaminated soil, temperature in ground, unit weight and viscosity of contaminants by using FLUSH1 model modified from FLUSH. Results from numerical analysis indicate that the most important factor to the in-situ soil remediation in vertical drain system is the effective diameter of contaminated soil. It also shows that the next important factors are the viscosity of contaminants, porosity of soil, shape of soil, temperature in ground, unit weight of contaminants and density of soil, in order. However, the others except the effective diameter of contaminated soil are insignificant to the soil remediation.

  • PDF

The test-bed construction and water purification assessment of the eco-convergence type aerated string contacted oxidation system (생태융합형 접촉산화수로 Test-Bed 구축 및 정화효율 평가)

  • Choi, Sunhwa;Lee, Seung-Heon;Jang, Kyusang;Kim, Heungseop
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.592-592
    • /
    • 2016
  • 국내에는 17,500여개의 농업용 저수지가 전국적으로 분포하고 있다. 국내 농업용 저수지는 대부분이 소규모이며, 연중 수량 변동이 심하고, 유역배율이 작아 태생적으로 수질오염에 취약한 구조로 되어 있다. 특히 농업용 저수지는 도시 근교나 농촌지역에 많이 위치하고 있어 유역 내 축산 농가나 미처리 생활하수에서 유래된 유기물 및 영양염류 유입에 의한 수질오염도가 높다. 저수지에 고농도로 유입되는 유기물, TN, TP를 처리하기 위하여 농어촌연구원과 수생태복원(주)에서는 공동으로 친환경 수처리시설인 생태융합형 접촉산화시스템을 개발하였다. 생태융합 접촉산화수로는 상부 식생과 수로 내의 섬유상 끈상 미생물 접촉재를 이용하여 오염수가 수로를 흐르면서 침전, 여과, 흡착, 산화, 흡수 등 물리학적, 화학적, 생물학적 원리를 이용하여 고농도의 유기물과 질소, 인을 제거하는 물리적, 생물학적 공정을 융복합 기술이다. 본 연구에서는 경기도 시흥시에 소재하고 있는 M 저수지에 현장 Test-bed를 구축하여 수질정화효율을 평가하였다. M 저수지는 유효저수지량이 약 23만톤에 해당하는 소규모 저수지로, 1941년도 준공된 아주 노후화된 저수지로 평균 수심이 2m 이하이고 연중 수질오염도가 높은 저수지이다. 매화저수지 수변에 설치된 생태융합형 접촉산화수로의 전체규모는 길이 8.6m, 폭 2m, 수심 2m에 해당하며, 끈상 미생물 메디아조 3개($2{\times}2{\times}6m^3$), 침전조 1개($2{\times}2{\times}2m^3$)로 구성되어 있다. 기타 부대 장치로는 끈상 메디아조에 산소공급을 위한 Air-mist(마이크로 버블 발생장치), 자동운전계기판, 유입펌프 등이 있다. 생태융합형 접촉산화수로의 처리 공정은 유입수${\rightarrow}$에어미스트${\rightarrow}$고속복합응집장치${\rightarrow}$융복합 산화조(3조)${\rightarrow}$침전조${\rightarrow}$방류로 구성되어 있다. 테스트 베드는 2015년 8월 말경에 구축 완료하였으며, 끈상 미생물 메디아조의 수질정화효율을 평가하기 위하여 9월부터 11월까지 총 7회 걸쳐 유입수와 유출수를 각각 조사하였다. 현장 측정항목인 수온, pH, EC, DO 등은 유입수 및 유출수간 큰 차이가 없었고, COD, SS, Chl-a, TP 등은 수처리시스템 초기 가동시에는 메디아에 미생물 부착율 저조로 유입수 및 유출수 수질농도에 큰 차이가 없었으나, 운영시간의 경과와 함께 메디아의 미생물 충진율이 높아짐에 따라 처리효율이 최대 SS 69.6%, Chl-a 89.3%, TP 89%까지 도달하는 것으로 나타났다. 생태융합 접촉산화수로는 부지 집약적인 컴팩트한 수처리 시설로서 현재 널리 이용되고 있는 인공습지를 대체할 수 있는 경제적인 시설로 판단된다.

  • PDF

Application of CFD model for the design of settling basin inlet structure (침전지 유입부 설계를 위한 CFD모형의 적용)

  • Yu Chang Hwan;Lee Jong Hyun;Kim Dae Geun;Kim Nam Il
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2005.05b
    • /
    • pp.1083-1087
    • /
    • 2005
  • 하수처리장의 침전지는 고형물(SS)을 침전, 제거하여 하수를 정화하는 시설로서 생물학적처리에 의해 발생하는 슬러지와 처리수를 분리하는 것을 주목적으로 한다. 장방형침전지의 경우, 유입된 하수가 침전지의 전 단면에 걸쳐 균일하게 도달하게 하기 위하여 $6\~20\%$ 정도의 유공율을 가진 유공정류벽을 설치하며 유효 침전구역에서의 유속은 0.08 m/sec 이하가 되도록 설계되어야 한다. 지금까지 침전지 유입부의 설계시에는 상기 설계기준만을 참조하여 설계가 진행되고 있는 실정으로 보다 나은 대안을 도출하기 위한 분석은 미흡한 실정이다. 본 연구에서는 3차원 수치모형인 FLOW-3D를 이용하여 침전지의 유입부 설계를 위한 설계인자를 도출하였다. 특히 유공정류벽의 크기, 위치 유공율에 따라서 유입하수의 수리적인 특성을 3차원적으로 분석하였다. 저류벽의 위치에 따른 유량의 분배효과를 검토하기 위하여 저류벽의 폭, W를 2.4 m로 고정하고 유입부에서 저류벽까지의 거리, L을 1.5 m, 2.0 m, 2.5 m로 변화시키며 수치모의를 수행하였다. 그리고 저류벽의 폭에 따른 유량의 분배효과를 검토하기 위하여 L을 고정하고 W를 변화시키며 수치모의를 수행하였다. 유공정류벽의 유공율에 따른 유량의 연직 분배효과를 검토하기 위하여 유공율을 변화시키며 연직위치별 통과유량을 산정하였다 각 모의조건에 대한 통과유량 산정결과, 유공율이 $7\%$일때 통과유량의 표준편차가 가장 작게 발생하며, 유공율이 $7\%$보다 감소하거나 증가하면 표준편차가 증가하고 있음을 알 수 있다. 본 연구에서는 상용 CFD모형인 FLOW-3D를 계획 중인 하수처리장의 침전지 유입부 설계에 적용하였으며 저류벽의 위치와 폭, 유공정류벽의 유공율에 따른 유입하수의 분배효과를 분석하였다. 실험을 수행하여 보다 정밀한 공식으로 개선할 수 있었다.$10,924m^3/s$ 및 $10,075m^3/s$로서 실험 I의 $2,757m^3/s$에 비해 통수능이 많이 개선되었음을 알 수 있다.함을 알 수 있다. 상수관로 설계 기준에서는 관로내 수압을 $1.5\~4.0kg/cm^2$으로 나타내고 있는데 $6kg/cm^2$보다 과수압을 나타내는 경우가 $100\%$로 밸브를 개방하였을 때보다 $60\%,\;80\%$ 개방하였을 때가 더 빈번히 발생하고 있으므로 대상지역의 밸브 개폐는 $100\%$ 개방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히 교사들이 중요하게 인식하는 해방적 행동에 대한 목표를 강조

  • PDF

Study on the Development of Finishing Design Methods for Building Structures Using the Metal Films (금속피막에 의한 건축 마감 의장 기법 개발에 관한 연구)

  • Lim, Ji-Taek;Jung, Hwa-Rang
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.22 no.1
    • /
    • pp.183-189
    • /
    • 2018
  • In this study, the bond strength between concrete and metal films was investigate according to changing water content ratio of substrate concrete by pull-out test in order to develop the new finishing design methods for building structures using the metal films. The following conclusions were obtained as a result of the studies. It was find that the colour of metal did not change before and after the metal spraying. Also, the water content ratio of substrate concrete must be controlled under 10% weight to confirm the standard bond strength of finishing material to concrete. 2.5 MPa. To enhance the bond strength between concrete and metal films, it is very effective to strengthen the concrete surface using the agent which strengthen the concrete surface and seal the pore of metal film by the sealing agents. Therefore, the control of concrete surface treatment and water content ratio are necessary to secure the bond strength of metal films.

Effect of Temperature on Development and Reproduction of the Persimmon Fruit Moth, Stathmopoda masinissa (Lepidoptera: Stathmopodidae) (감꼭지나방(나비목: 감꼭지나방과)의 발육과 생식에 미치는 온도의 영향)

  • 박은철;최경환;김정화;조수원;김길하
    • Korean journal of applied entomology
    • /
    • v.40 no.4
    • /
    • pp.297-300
    • /
    • 2001
  • Development and reproduction of the persimmon fruit moth, Stathmopoda masinissa, were investigated under different temperatures (15, 20, 25, and 3$0^{\circ}C$). It took 96.1 days to grow from egg to adult at 2$0^{\circ}C$, 43.2 days at $25^{\circ}C$, and 34.6 days at 3$0^{\circ}C$. At 15$^{\circ}C$, all tested individuals died before pupation. The developmental threshold temperatures for egg, larva, pupa, and adult were 12.2, 13.5, 13.8, and 13.4$^{\circ}C$, respectively. The total effective temperatures for egg, larva, pupa, and egg to adult were 74.0, 331.3, 160.5, and 569.9 degree days, respectively. The hatching, pupation, and emergence rates were highest at $25^{\circ}C$. The average life span of adult prior to laying eggs and the total life span of adult were 12.6 and 29.3 days at 2$0^{\circ}C$, 3.8 and 8.6 days at $25^{\circ}C$, and 2.5 and 7.0 days at 3$0^{\circ}C$, respectively. Mean generation time in days (T) was shorter at higher temperature. Net reproductive rate per generation (R$_{o}$) was lowest at 2$0^{\circ}C$. The intrinsic rate of natural increase (r$_{m}$) was highest at $25^{\circ}C$ as 0.066.

  • PDF

Effect of Temperature and Host Plant on Development and Reproduction of the Sweetpotato Whitefly, Bemisia tabaci(Homoptera:Aleyrodidae) (담배가루이의 발육과 생식에 미치는 온도와 기주의 영향)

  • 안기수;이기열;최미현;김정화;김기하
    • Korean journal of applied entomology
    • /
    • v.40 no.3
    • /
    • pp.203-209
    • /
    • 2001
  • Development and reproduction of the sweetpotato whitefly, Bemisia tabaci(B biotype) were investigated under different temperatures and host plants. Developmental periods from egg to pre-adult of whiteflies measured under four constant temperatures: they were 86.2 days at $15^{\circ}C$ and 17.0 days at $30^{\circ}C$. Lower threshold temperature and total effective temperature for the development of egg and nymph, and for the complete development (egg to emergence) were $10.1,\;11.6,\;11.1^{\circ}C$ and 110.3, 204.7, 317.3 degree days, respectively. The hatching and emergence rates were 87.0% at $25^{\circ}C$ and 76.7% at $20^{\circ}C$, which were higher than the results of other temperatures. The adult longevity was 23.6 and 14.0 days at $20^{\circ}C$ and $30^{\circ}C$, respectively. The highest average fecundity per female was 103.3 at $25^{\circ}C$. But there were no significant differences among the temperatures. The highest intrinsic rate of natural increase($r_{m}$) was 0.196 at $30^{\circ}C$ and the highest net reproduction rate ($R_{o}$) was 97.33 at $25^{\circ}C$. Developmental periods from egg to pre-adult of whiteflies were 21.2 on the tomato, 28.1 on red pepper, 22.2 on eggplant and 25.5 days on poinsetia. The hatching was highest (90.3%) on red paper and emergence rate was highest (89.6%) on eggplant. The longest longevity of adult female was 26.5 days on eggplant, and the average fecundity per female was greater on tomato and eggplant than on other host plants. The intrinsic rate of natural increase($r_{m}$) was the highest on tomato as 0.165 and the net reproduction rate ($R_{o}$) was the highest on eggplant as 106.1. As a result, the optimum range of temperature for the growth of B. tabaci was between $25^{\circ}C$ and $30^{\circ}C$, and the optimum host plant were tomato and eggplant among the plants tested.

  • PDF

Effects of Temperatures on Development and Reproduction of the Sycamore Lace Bug, Corythucha ciliata (Hemiptera, Tingidae) (버즘나무방패벌레(노린재목, 방패벌레과) 발육과 생식에 미치는 온도의 영향)

  • 김길하;최미현;김정화
    • Korean journal of applied entomology
    • /
    • v.38 no.2
    • /
    • pp.117-121
    • /
    • 1999
  • Development and reproduction of the sycamore lace bug, Corythucha ciliata, were investigated under different temperature regimes. Duration of development from egg to pre-adult of the sycamore lace bug measured seven temperatures ranged from 54.0 days at 18$^{\circ}$C to 17.9 days at 33$^{\circ}$C. Development was not successful at 15$^{\circ}$C and 35$^{\circ}$C. Developmental zero point and total effective temperature for development of egg, nymphal, and complete development were 1 1 .O, 10.9, ll.l$^{\circ}$C and 150.3, 230.6, 376.1 degree-days, respectively. Longevities of adult females varied to temperature from 51.8 days at 18$^{\circ}$C to 17.2 days at 33$^{\circ}$C. The average fecundity per female was greater at 25$^{\circ}$C and 28$^{\circ}$C compared with at other temperatures. The intrinsic rate of natural increase (r,) and net reproduction rate (R,) were highest at 28$^{\circ}$C as 0.170 and 73.25, respectively. As a result, optimum ranges of temperature for C. ciliata growth were between 25$^{\circ}$C and 28$^{\circ}$C.

  • PDF

Effect of Temperature on Development and Reproduction of the Cotton Caterpillar, Palpita indica(Lepidoptera: Pyralidae) (목화바둑명나방(나비목:명나방과)의 발육과 생식에 미치는 온도의 영향)

  • Shin, Wook-Kyun;Kim, Gil-Hah;Song, Cheol;Kim, Jeong-Wha;Cho, Kwang-Yun
    • Korean journal of applied entomology
    • /
    • v.39 no.3
    • /
    • pp.135-140
    • /
    • 2000
  • Development and reproduction of the cotton caterpillar, Palpita indica, were investigatedunder different temperatures (15 .O, 17.5, 20.0, 22.5, 25 .O, 27.5, 30.0, 32.5, and 35 .O$^{\circ}$C). Duration fromegg to pre-adult of the cotton caterpillar were ranged from 68.6 days at 175$^{\circ}$C to 19.7 days at 35.0% (3.5times shorter growth period compared with that at 17S$^{\circ}$C). At 15.0$^{\circ}$C, cotton caterpillar eggs developedto the last larval instar but were not able to go through the pupal stage. The lower developmentalthreshold temperatures and degree-days of egg, larva, pupa, and complete development were 13.4, 10.6,11.6, and 11.5"C and 55.3,251.5, 138.3, and 479.8 degree days, respectively. The hatching, pupation andemergence rates were higher at 25.0eC and 27.5"C compared with other temperatures. The survival ratefrom the hatched larva to adult was the highest at 27.5"C. The preoviposition and the adult longevity were11.5 and 30.6 days at 17.5"C and 1.5 and 9.2 days at 35.0$^{\circ}$C, respectively. The mean fecundity perfemales was greater at 25.0$^{\circ}$C and 27.5"C compared with other temperatures. Mean generation time indays (T) was shorter on higher temperature. Net reproductive rate per generation (R,) was the lowest atthe highest temperature as well as at the lowest, and it was 199.1 which was the highest at 27.5"C. Theintrinsic rate of natural increase (r,) was highest at 30.0$^{\circ}$C as 0.148. As a result, optimum ranges oftemperature for P. indica growth were between 25.0-32.5"C .emperature for P. indica growth were between 25.0-32.5"C .t;C .

  • PDF

Effect of N-Application Level According to Seedling Density on Tiller Development, Yield and Quality in Direct-Seeded Rice on Flooded Paddy Surface (벼 담수표면산파 시 입모밀도에 따른 시비 조절이 분얼발생, 수량 및 품질에 미치는 영향)

  • Chung, Nam-Jin;Kim, Jeong-Il;Park, Jeong-Hwa;Kim, Je-Kyu
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.51 no.spc1
    • /
    • pp.52-57
    • /
    • 2006
  • This research was carried out to determine the effect of controlling nitrogen application on tiller development, yield, and quality of rice under scanty or excess seedling stands in direct-seeded rice on flooded soil surface. Seedling stand was set to 3 levels: scanty $(60/m^2)$, optimum $(120/m^2)$, and excess $(200/m^2)$. In the scanty plot, additional 4 kg/10a nitrogen was applied at the 3rd leaf stage to promote tiller development. On the other hand, applying 3.3 kg/10a nitrogen at 5th leaf stage in the excess plot was omitted to suppress tillering. Maximum numbers of tillers per plant were 15.2 and 8.6 in scanty and excess plots, respectively, as compared with 9.8 in optimum plot. Productive tiller rate decreased with the increase in number of seedling stands. Regardless of seedling density, the first tiller developed on the 3rd node of rice stem from the bottom. The primary tillers developed at 3, 4, 5, 6, 7 nodes in scanty plot, 3, 4, 5 nodes in optimum plot, and 3, 4 nodes in excess plot. The secondary tillers developed only in some portion of plants in scanty and optimum plots. The order of tiller emergence was negatively correlated to stem length, panicle length, non-productive tiller number, grain number per panicle, and fertility in scanty plot, and to perfect grain ratio in excess plot. In the optimum plot, however, the order of tiller emergence was not correlated to any of the mentioned characteristics. The perfect grain ratio of scanty plot was the highest because green-kerneled rice was a very small portion in the primary tillers as compared with those of optimum and excess plots. Yield indexes of scanty and excess plots were 99%, and 97%, respectively, of the yield (494 kg/10a) in optimum plot. In conclusion, when seedling stands are not at optimum level, rice yield and quality similar to optimum planting density level can be obtained by means of controlling nitrogen application.