• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.38-39
• /
• 2011

본 논문에서는 계통연계형 배터리 에너지 저장장치의 실험에 대하여 서술한다. 배터리 에너지 저장장치는 배터리 뱅크와 계통연계형 인버터로 이루어져 있다. 배터리 뱅크는 납축전지로 구성되고, DC Link에 병렬로 연결된다. 인버터의 동작모드는 충전과 방전 두 가지로 나뉘며, 충전모드에서는 배터리의 수명을 고려하여 CC-CV 제어를 수행하고, 방전모드에서는 유효/무효 전력제어를 수행한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.217-217
• /
• 1999

축전 결합 차폐막(Faraday shield)이 없는 평판형 유도 결합 플라즈마 장치에서 방전 모드 전이 중출력 결합 변화동안 전자 가열에 대한 연구가 행하여졌다. 전자 에너지 분포 함수(EEDF)의 전개가 RF 보상탐침을 사용, 교류 충첩 방법으로 측정된다. RF 출력에 따른 전자 밀도, 유효 전자 온도 및 특히, 플라즈마 전위의 동향이 제시된다. bi-Maxwellian EEDF를 가진 플라즈마에서 플라즈마 전위가 고 에너지 전자 그룹에 의해 결정됨을 보이고, 플라즈마 전위와 EEDF 상호 관계가 논의된다. 실험 결과로부터 RF출력에 따른 플라즈마 전위의 변화가 전자 가열에 있어 축전 출력 결합의 상대적인 기여의 변화를 반영함을 알 수 있다.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.176-184
• /
• 2010

The power simulator for a LEO satellite is a useful tool to analyze mission validity and energy balance for various mission scenarios by estimating power generation, power consumption, depth of discharge, bus voltage, charging/discharging current, etc. In this paper, it is described the calculation algorithm of the solar array (SA) power, the satellite load power and the battery modeling method to develop a satellite power simulation. To simulate the SA power generation, three different operation modes (DET, MPPT, CV) of SAR (Solar Array Regulator) are considered with a SA model. The satellite load power is estimated using the satellite unit power database, the unit on/off configuration at some satellite operation modes. The bus voltage and battery charging/discharging current at the specific DoD (Depth of Discharge) are calculated based on the battery characteristics. By this satellite power simulator, it can be conveniently analyzed the energy balance and the validity of a planned mission of a LEO satellite.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.7
• /
• pp.70-75
• /
• 2014

The experiment was done on traveling at the speed of 20km/h, 60km/h and 100km/h using the performance testing mode for chassis dynamometer. The experimental method were employed to measure the waveform of secondary ignition coil and exhaust emission. In this experiment, the correlation between the secondary waveform coming from ignition coil and exhaust emission were measured in decrepit vehicle. The secondary waveform characterized by the value of effective discharge energy. The following results are obtained by analyzing the data relativity between the effective discharge energy and exhaust emission. The variation rate of effective discharge energy was largest 60km/h, 20km/h, 100km/h velocity in the ordered named. As the vehicle velocity increases, the average variation rate of CO and $NO_X$ decreases and that of HC and $CO_2$ decrease. The value of effective discharge energy, CO, $NO_X$ and fuel consumption is measured badly in case of car with failures in MAP, spark plug and good in case of car with before and after maintenance regardless of vehicle velocities. The value of effective discharge energy is to be nearly parabolic shape as vehicle velocity increases. As the value of effective discharge energy increases, the value of $NO_X$, HC and $CO_2$ decrease, the value of CO increase. The most sensible factors of exhaust emission were CO, $NO_X$, and the small variation factors were HC, $CO_2$.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.495-504
• /
• 2015

This work investigated the characteristics of a packed-bed plasma reactor system and the performances of the plasma reactors connected in series or in parallel for the decomposition of ethylene. Before the discharge ignition, the effective capacitance of the ${\gamma}$-alumina packed-bed plasma reactor was larger than that of the reactor without any packing, but after the ignition the effective capacitance was similar to each other, regardless of the packing. The energy of electrons created by plasma depends mainly on the electric field intensity, and was not significantly affected by the gas composition in the range of 0~20% (v/v) oxygen (nitrogen : 80~100% (v/v)). Among the various reactive species generated by plasma, ground-state atomic oxygen and ozone are understood to be primarily involved in oxidation reactions, and as the electric field intensity increases, the amount of ground-state atomic oxygen relatively decreases while that of nitrogen atom increases. Even though there are many parameters affecting the performance of the plasma reactor such as a voltage, discharge power, gas flow rate and residence time, all parameters can be integrated into a single parameter, namely, specific input energy (SIE). It was experimentally confirmed that the performances of the plasma reactors connected in series or in parallel could be treated as a function of SIE alone, which simplifies the scale-up design procedure. Besides, the ethylene decomposition results can be predicted by the calculation using the rate constant expressed as a function of SIE.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.389-390
• /
• 2020

본 논문은 DC 마이크로그리드에서 배터리 에너지 저장 장치의 SoC(State-of-Charge)를 기반으로 한 계층 제어 기법을 제안한다. DC 마이크로그리드의 안정적인 운영을 위해 계층 구조의 제어방식이 필요하다. 제안하는 계층 제어 기법은 2 레벨로 구성된다. 1차 제어에서는 SoC에 의해 드룹 계수가 조정되고 충·방전 전류가 제어되어 SoC 밸런싱이 이루어진다. 2차 제어는 1차 제어에 의해 발생하는 배전망 전압강하를 보상한다. 제안하는 SoC 기반 계층 제어를 적용한 에너지 저장 장치는 일정 SoC 운용범위에서 동작하고 배전망 전압을 일정하게 유지하여 DC 마이크로그리드의 안정적인 전력관리가 가능해진다. 본 논문에서는 PSIM 시뮬레이션을 통해 제안하는 기법의 유효성을 검증하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.149-149
• /
• 2011

아르곤 기체의 방사세기 또는 그 세기 비는 플라즈마 공정 진단에서 일반적으로 사용된다. 본 실험에서는 100 mTorr 압력 조건하의 유도결합 플라즈마(13.56 MHz)에서 E-H 모드 전이 영역, rf 바이어스(12.5 MHz) 전력 인가 및 N2 혼합 시 단순화한 충돌-방사 모델에 기초한 광방사 세기비 방법을 적용하여 플라즈마 변수를 진단하였다. 개발 프로그램 기반의 분광기를 사용하여 아르곤 기체의 특정 파장(750.4, 751.5 그리고 811.5 nm)들을 관측하였고, 동일한 조건하에서 정전 탐침법으을 이용하여 전자 에너지 분포함수의 변화도 측정 하였다. 맥스웰 전자 에너지 분포를 가정하는 일반적인 경우와 비교하여 볼 때 실제적인 전자 에너지 분포함수의 측정은 전자의 가열 메커니즘에 대한 상세한 정보를 제공함과 동시에 플라즈마 재흡수에 대한 보정을 가능하게 해준다. 광방사 세기비법에 의해 측정된 결과에 의하면, 750.4 nm/751.5 nm는 높은 에너지(>13.08 eV)의 전자들의 유효 전자온도에 대한 정보를 나타내는 반면 811.5 nm/750.4 nm는 아르곤 준안정 준위 밀도(1s5)에 대한 정보를 제공하게 된다. 수행된 실험 조건하에서, 측정된 준안정 준위 밀도는 E-H 모드 전이 영역에서 최대값을 나타내었고 바이어스 전압 및 N2 기체 혼합 비율이 증가함에 따라 감소하는 결과를 얻었다. 유효 전자온도의 경우 광방사 세기비법과 정전 탐침법 모두 같은 결과를 보여 주었는데, E-H 모드 전이 영역에서는 전자온도는 거의 일정하였고 바이어스 전압 및 N2 기체 혼합 비율이 증가함에 따라 전자온도는 증가하였다. 이러한 실험 결과는 방전 모드 전이, 바이어스 인가 그리고 혼합 기체 사용하는 공정 플라즈마를 이해하는데 있어 이들 변수의 진단이 중요한 요소임을 보여준다.

• Korean Chemical Engineering Research
• /
• v.48 no.4
• /
• pp.540-543
• /
• 2010

In this study, we made low temperature plasma reactor in order to treat safely $NO_x$ which included in the gas. We investigated experimently and inspected efficiency characteristics of equipment about flow rate of reactant material and discharge input power which supplied into reactor. As a reaction gas, by using mixture gas of $NO/N_2$ and $N_2/O_2$, we setted up initial NO concentration and supplied the speed of a current to 1~4 l/min. When the amount of flow increased, reduction rate of NO was low. Also when discharge input power was high, decomposition of NO was easy. Also the longer delay time of reaction material and the higher discharge input power was, the higher decomposition energy efficiency was. And when the amount of flow was much, and the more discharge input power increased, the more ozone generated.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.89-95
• /
• 2015

Carbon felts manufactured by (Co)CNF were subjected to heat treatment under different temperatures to use for the electrode of a redox-flow battery. BET and weight loss were tested to investigate the physical properties of the carbon felt according to the heat treatment conditions. SEM and XPS were also analyzed to characterize their surface area. In addition, electrical resistance, CV (cyclic voltammetry) and RFB charge on the electrode properties were examined in accordance with the heat treatment conditions with the discharge performance. The changes of physical properties on the carbon felt surface was confirmed via SEM and BET analysis, The most addition of oxygen functional groups on the carbon felt surface was obtained when one hour heat treatment at $550^{\circ}C$ and it was confirmed by XPS analysis. After resulting the CV tests, the active area of the electrode was the largest at $550^{\circ}C$ heat treatment. The heat treatment experiment of vanadium redox flow battery using the carbon felts were tested at $400^{\circ}C$, $500^{\circ}C$ and $550^{\circ}C$. As a result, the charge-discharge energy efficiency of the heat treatment electrode was 72.9% and 79.8%, at $400^{\circ}C$ and $500^{\circ}C$, respectively. The efficiency of the heat treatment electrode at $550^{\circ}C$ was the best as 79.8% at $550^{\circ}C$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.6
• /
• pp.33-38
• /
• 2011

In recent years, mobile devices and high-hearth because of the multi-functional, battery usage is increasing. But compared to the required computing power increases the battery's energy capacity of the research is going slowly. In this paper we use the battery discharge characteristics, can be used in battery research and to increase the effective capacity, wireless transmission of power from the system just by turning off the technology to extend battery life is explained. Experimental transmission of images through the standard battery drain intervals according to measuring battery life, and applications used in these experiments and heuristic to optimize battery run time was achieved.