• Journal of Broadcast Engineering
• /
• v.10 no.1 s.26
• /
• pp.4-13
• /
• 2005

An equalization algorithm is proposed to guarantee a stable performance in fast fading channels for digital television (DTV) systems from the advanced television system committee (ATSC) standard. In channels with high Doppler shifts, the conventional equalization algorithm shows severe performance degradation. Although the conventional equalizer compensates poor channel conditions to some degree, long filter taps required to overcome long delay profiles are not suitable for fast fading channels. The Proposed sparse equalization algorithm is robust to the multipaths with long delay Profiles as well as fast fading by utilizing channel estimation and equalizer initialization. It can compensate fast fading channels with high Doppler shifts using a filter tap selection technique as well as variable step-sizes. Under the ATSC test channels, the proposed algorithm is analyzed and compared with the conventional equalizer. Although the proposed algorithm uses small number of filter taps compared to the conventional equalizer, it is stable and has the advantages of fast convergence and channel tracking.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.9
• /
• pp.624-633
• /
• 2001

Influence of the grating half-period fluctuation on the normalized coupling coefficient has been studied by an effective index transfer matrix method in quarter wavelength shifted(QWS) DFB lasers. The laser facets are assumed to be perfectly antireflection coated, and the period fluctuation is modeled by two correlated Gaussian random variables. In the presence of the random fluctuation in the grating period, effective normalized coupling coefficient is reduced because the in-phase feedback strength Is weakened. We have shown that the normalized coupling coefficient determined from the side mode spacing is less than the effective coupling coefficient, and the normalized coupling coefficient determined from the mode spacing or spontaneous emission spectrum does not properly represent the feedback strength of the grating.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.6
• /
• pp.30-39
• /
• 2016

An experimental study was performed to investigate flexural performance and bond characteristics of RC beams strengthened using ductile polyethylene terephthalate(PET) with low elastic modulus. Bond tests were planned and completed following CSA S806. Test variables were fiber type and fiber amount. Also, total of 8 RC beams was tested. Major test variables of the beam tests included section ductility(${\mu}=3.4$, 7.0), fiber type(CF, GF, PET) and amount of fiber strengthening. Moment-curvature analyses of the beam sections were also performed. In bond tests, the bond stress distribution as well as the maximum bond stress increased with increasing amount of PET. In case of 10 layers of PET, the effective bond length was 60 mm with the maximum and the average bond stress of 2.33 and 2.10 MPa, respectively. RC beam test results revealed that the moment capacity of the RC beams strengthened using PET 10 and 20 layers increased over the control beam with little reduction in ductility by fiber strengthening. All beams strengthened using PET resulted in ductile flexural failure without any sign of fiber debonding or fiber rupture. It was important to include the mechanical properties of adhesive in the moment-curvature analysis of PET-strengthened beam sections.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.5
• /
• pp.577-585
• /
• 2023

Lateral torsional buckling causessafety accidentssuch as collapse accidents during erection. Therefore, anaccurate safety designshould be conducted. Lateral torsional buckling canbe prevented by reinforcing the end orreducing the unbraced length. The method ofreducing the unbraced length by installing a crossframe has high material and installation costs and low maintenance performance.In addition, structuralsafety may be deteriorated due to cracks. The end reinforcement method using Concrete Filled Half Pipe Stiffeneris a method ofreinforcing the end of a plate girder using a stiffenerin the form of a semi-circular column. This method increasesthewarping strength ofthe girder and increasesthe lateral torsional buckling strength.In thisstudy, the effect ofincreasing the warping strengthof plate girders with concrete filled half pipe stiffeners was confirmed. To verify the effect, the results ofthe designequationand the finite element analysis were compared and verified through a experiment. As a result, the plate girderwithCFHPS increased thewarping strengthand confirmed that the lateral torsional buckling strength was increased.

• Proceedings of the Turfgrass Society of Korea Conference
• /
• 2011.02a
• /
• pp.25-32
• /
• 2011

본 연구는 화력발전의 부산물로 발생하는 석탄바닥재가 골프장 사질 토양의 개량재로 사용 적합한지를 평가하기 위해 수행되었으며, 결과를 요약하면 다음과 같다. 1. 석탄바닥재의 화학성을 분석한 결과 총질소 0.34%, 가용성 인산 $52mgL^{-1}$, 치환성 칼륨 $51mgL^{-1}$ 뿐만 아니라 소량의 치환성 칼슘과 마그네슘을 함유하고 있어 식물생육에 이롭고, 유해중금속함량은 Cd, $Cr^{6+}$, Pb, Ni, As는 $1mgL^{-1}$ 이하, Cu 농도는 $1.25mgL^{-1}$ 검출되어 토양환경보전법의 토양오염우려기준 이하이므로 석탄바닥재 재활용으로 인한 토양오염 가능성은 매우 낮은 것으로 판단된다. 2. 모래 토양에 석탄바닥재를 부피비로 0~50% 비율로 혼합한 시료의 투수계수와 유효수분함량을 측정한 결과 석탄바닥재 혼합비율이 증가할수록 투수계수는 유의성 있게 감소하고 유효수분함량은 유의성 있게 증가해 석탄바닥재가 모래 토양의 낮은 수분보유력을 개선하는 효과가 있음을 확인하였다. 3. 모래 토양에 석탄바닥재를 부피비로 0~50% 비율로 혼합한 시료를 잔디식재층으로 조성한 라이시미터에 잔디종자 파종 후 약 4개월 뒤 잔디밀도가 완전히 형성된 후에 시비 후 3일 간격으로 채취한 용탈수를 분석한 결과 1일과 4일 후에 채취한 초기 용탈수에서는 석탄바닥재 혼합비율이 높을수록 $NO_3-N$, $NH_4-N$ 및 K함량이 유의성 있게 감소했으며, 대조구에 비해 석탄바닥재 혼합비율이 높은 처리구일수록 $NO_3-N$, $NH_4-N$ 및 K함량이 용탈수 채취기간 동안 지속적으로 용탈되었다. 이 결과로 석탄바닥재가 모래 토양의 낮은 양분 보유력을 개선하는데 효과적이고 석탄바닥재처리가 대조구에 비해 오랫동안 식물 생육에 필요한 양분을 공급하는 효과가 있음을 확인하였다. 4. 골프장 그린상구조와 동일한 시험포장을 만들고 모래 토양에 석탄바닥재 10%와 20% 그리고 피트, 액시스, 이소라이트를 부피비로 10% 비율로 혼합한 시료를 잔디식재층으로 조성하고 크리핑 벤트그래스(Agrostis paulstris Huds), Penn A-4 $10gm^{-2}$을 파종한 후에 처리구별로 잔디 품질을 평가하기 위해 잔디 밀도, 뿌리길이, 색상 및 시각적 품질을 조사한 결과 석탄바닥재 처리구는 기존에 사용하는 개량제인 피트, 액시스, 이소라이트 처리구와 동등한 잔디생육 촉진 효과가 있는 것으로 조사되었다. 5. 결론적으로 석탄바닥재는 골프장 토양의 물리적 특성과 화학적 특성을 개선하고 잔디생육에 필요한 양분을 공급하는데 효과적인 토양개량재라고 할 수 있다.

• Korean Journal of Food Science and Technology
• /
• v.49 no.4
• /
• pp.444-452
• /
• 2017

This study aims to investigate the physicochemical properties of the extruded rice snack with added the containing mealworm. Adding the mealworm addition enhanced protein and unsaturated fatty acid contents, which are insufficient in rice. As the extrusion process variables, the death temperatures and moisture content were set to at respective 130 and $140^{\circ}C$, and 20 and 25%, respectively. The expansion ratio increased as with death temperature, whereas the increased moisture content decreased. The nitrogen solubility index and protein digestibility index increased with the added mealworm content of mealworm increased. As mealworm content and death temperature, and moisture content increased, DPPH radical scavenging activity significantly increased but the rancidity decreased. As the result of this study, confirmed that the addition of mealworm to the extruded rice snack was the confirmed as the effective process to improve nutrition, and antioxidation. Also, death temperature and moisture content have an effect on softened the texture of extruded rice snack.

• Journal of Mushroom
• /
• v.20 no.4
• /
• pp.241-248
• /
• 2022

To elucidate how cultivation temperature affected various traits including pileus color, yield and morphology of Pleurotusspp. Main results were as follows. Pileus lightness of all cultivars of Pleurotustested became higher as cultivation temperature increased, while those of Santari, Hwang-geumsantari and Sunjung at 21℃ were lower than at 18℃. Redness and yellowness of pileus decreased as cultivation temperature increased; those of chromatic pileus cultivars showed noticeable difference. Yellowness of cultivar with chromatic pileus was higher than that of cultivar with achromatic pileus. Yield was increased as cultivation temperature increased, Wonhyeung 1ho; low temperature favored cultivar showed high yield when it was cultivated at low temperature andno fruiting body at 21℃. Valid number of stipes were generally higher at 18℃, and its correlation coefficient with yield was low. Length and stipe thickness changed consistently (larger and thicker) upon cultivation temperature; the coefficient of determination(R²) 0.514 for lengthof Heuktari and 0.963for stipe thickness of Santari were high. Correlation coefficient of one trait was highly related with multiple traits. In the future, we will conduct research on the changes of expressed genes involved in the pigments for pileus color by RNA expression analysis.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.386-395
• /
• 2010

The steam generator management program(SGMP) has recently defined the procedures for the qualification of eddy current hardware and technique. These procedures provide two basic methods for qualification. The first way is to qualify the equipment or the probe by using the flaw mechanism and method of the pulled tubes from the heat exchangers or the artificial flawed tubes. The second way is to verify the equivalency with the characteristics of the qualified equipment or probe. In this case, the qualified equipment or probe may be modified to substitute or replace instruments or probes without re-qualification provided that the range of essential variables defined in the examination technique specification sheet are met. This study is to describe the result of the comparative performance evaluation of bobbin coil eddy current probes manufactured by KEPCO Research Institute and probes manufactured by a foreign manufacturer. As a result of this study, although there were minor differences between the two kinds of probes, it was evaluated that the two kinds of probes were almost identical in the significant performance characteristics described in the KEPCO Research Institute guideline.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.3
• /
• pp.229-236
• /
• 2017

The purpose of this study is to investigate the behavior and characteristics of rubber springs and calculate the compressive stiffness by performing dynamic compression tests of rubber springs. In order to carry out the dynamic compression test of rubber spring, total 9 rubber springs were tailored by calculating the shape factor of L80-D55, L90-D58, and L100-D60, and used for the experiments. Experiments were performed by controlling the compression according to the length of the rubber spring, and the compression was increased in the order of 5%, 10%, 15%, 20% and 25% of the strain. From the experimental results, the force-strain curves were obtained and it was confirmed that strength decrease and strength increase phenomenon occurred as the strain increased. In addition, it was confirmed that the decrease of stiffness and the increase of stiffness were clearly observed according to the size and diameter of the rubber spring, and the effective compression stiffness was estimated using the slope of the force-strain curve. By using the effective compressive stiffness, design values that can be used in actual design were presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.757-764
• /
• 2014

In this study, the effect of shape parameters on the J-R curves of curved CT specimens was evaluated using the limit load method. Fracture toughness tests considering the shape factors L/W and $R_m/t$ of the specimens were also performed. Thereafter, the J-R curves of the curved CT specimens were compared using the J-integral equation proposed in the ASTM (American Society for Testing and Materials) and limit load solution. The J-R curves of the curved CT specimens were also compared with those of the CWP (curved wide plate), which is regarded to be similar to real pipe and standard specimens. Finally, the effectiveness of the J-R curve of each curved CT specimen was evaluated. The results of this study can be used for assessing the applicability of curved CT specimens in the accurate evaluation of the fracture toughness of real pipes.