• Journal of Adhesion and Interface
• /
• v.13 no.4
• /
• pp.188-192
• /
• 2012

Herein, CdS-coated PMMA nanoparticles were prepared by in-situ surfactant-free emulsion copolymerization and subsequent CdS coating process. As-prepared CdS/PMMA hybrid particles had 201.7 nm in diameter. The amount of CdS nanocrystals in the hybrid particles was 10.37 wt% determined by TGA and elemental analysis. The size of CdS crystals was 3.55 nm preferentially grown in (111) plane. UV-vis spectrum of PMMA/CdS nanoparticles showed the significant blue-shift in optical illumination. The reason was found because the synthesized CdS nanocrystals on PMMA particles had a different band gap energy of 2.70 eV which was significantly higher than that of known-value of bulk CdS (2.41 eV) due to a quantum confinement effect.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.2
• /
• pp.116-124
• /
• 2001

To improve the functional properties as a food, silk fibroin was phosphorylated with STMP In the phosphorylation reaction of silk fibroin, the degree of phosphorylation was increased with high alkali index and treatment temperature. Depending on treatment time and concentration of STMP it was rapidly increased up to 1hr. and 50%, but slowly above that time and 100%. It was indicated in the results of FT-IR analysis and $\^$31/p NMR spectroscopy of phosphorylated fibroin that it had a close ∝-helix and poly-phosphate structure. The more phosphorylation of fibroin made more turbidity, foam expansion and foam stability, but less solubility. Emulsifying activity was increased up to P100, but slightly decreased above Pl00 and emulsifying stability was constantly increased on the progressing of phosphorylation.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.196-203
• /
• 1993

Emulsions were prepared with the inversion emulsification method which adopted the agent-in-oil method-dissolving the mixed surfactants composed of the glycerin monostearate, polyoxyethylene(100) monostearate, and polyoxyethylene(20) sorbitan monostearate into mixtures of liquid paraffin and beeswax, and adding the aqueous solution of propylene glycol, gradually-and then their phases and viscosities behaviors in the emulsifying process were investigated. The fine and homogeneous o/w emulsions were formed in the HLB region (HLB 10.1~12.3), showing liquid crystalline phase and white gel phase in the emulsifying process. The phase inversion steps in the emulsifying process appeared as follows, i.e., oil continuous phase${\rightarrow}$liquid crystalline phase${\rightarrow}$white gel phase${\rightarrow}$o/w emulsion. Shear rate-shear stress curves of the prepared emulsions had the yield values which pointed out the existence of inner structure between emulsion particles, and the hysteresis loop which showed that the inner structure wasbroken irreversibly by the shear. The area of hystersis loop, an index of breakdown of inner structure, was increased with the decreasing of the HLB value of emulsifier, Shear time-shear stress curves showed the time dependence of plastic viscosity, and the relaxation time in time thinning behavior(${\lambda}$) indicated that the stability of emulsions prepared with the inversion emulsification method was decreased with the increasing of HLB values of emulsifier and was higher than that of emulsions prepared by homomixer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1565-1570
• /
• 2012

The effects of emulsifiers as additives on the physical properties of rice cookies were investigated in this study. The amounts of emulsifiers added were 3, 6, and 9% based on 100 g of rice flour. Peak viscosity of rice flour added with diacetyl tartaric ester of monoglyceride (DATEM) showed smaller decreases compared to addition of sodium stearoyl lactylate (SSL) or sucrose ester (SE). Hardness of dough as measured by TA increased upon addition of SSL, SE, and DATEM, whereas hardness of cookies increased upon addition of SSL and SE. In contrast, addition of DATEM did not increase hardness of cookies. Density of dough and cookies increased upon addition of SSL and SE, whereas density decreased upon addition of DATEM and spreadability showed the lowest values. From these results, it was confirmed that use of emulsifiers in cookies can control cookie texture. Compared to SSL and SE, DATEM increases hardness of dough and decreases densities of dough and cookies, making it effective in softening the texture of rice cookies.

• Polymer(Korea)
• /
• v.28 no.5
• /
• pp.404-411
• /
• 2004

The microcapsules containing triphenyl phosphate (TPP), a flame retardant, were prepared by phase-inversion emulsification technique using the epoxy resin (Novolac type) with excellent physical properties and network structure. This microencapsulation process was adopted for the protection of TPP evaporation and wetting of polymer composite during the polymer blend processing. The TPP, epoxy resin and mixed surfactants were emulsified to oil in water (O/W) by the phase inversion technology and then conducted on the crosslinking of epoxy resin by in-situ polymerization. The capsule size and size distribution of TPP capsules was controlled by mixed surfactant ratio, concentration and TPP contents, The formation and thermal property of TPP capsules were measured by differential scanning calorimetry and thermogravimetric analysis. The morphology and size of TPP capsules were also investigated by scanning and transmission electron microscopies. As the surfactant concentration increased, the TPP capsules were more spherical and mono-dispersed at the same weight ratio of mixed surfactants (F127: SDBS).

• Korean Journal of Food Science and Technology
• /
• v.38 no.1
• /
• pp.59-67
• /
• 2006

Effects of ${\alpha}-amylases$ and emulsifiers on characteristics of frozen bread dough were examined during 12 weeks of storage. Fungal or bacterial ${\alpha}-amylase$ and various emulsifiers, including monoglyceride (MG), sodium stearoyl-2-lactylate (SSL), and diacetyltartaric acid ester of mono- and diglycerides (DATEM), were added to frozen dough individually and as mixtures Height of frozen dough at maximum development time, total volume of $CO_2$ gas, and retention volume increased with increasing content of emulsifiers. indicating addition of enzymes and emulsifiers had significant effect on flexibility of starch-gluten complex in dough. Frozen dough made with bacterial ${\alpha}-amylase$ showed slightly higher pH during storage than that of frozen dough with fungal ${\alpha}-amylase$. Bread made from frozen dough prepared with both enzymes and emulsifiers showed lower specific loaf volume than that of control during storage, whereas highest specific loaf volume was obtained with addition of fungal ${\alpha}-amylase$ with SSL+MG and bacterial ${\alpha}-amylase$ with MG.

• Korean Journal of Food Science and Technology
• /
• v.48 no.3
• /
• pp.262-267
• /
• 2016

Physicochemical characteristics of chicken-thigh emulsion manufactured with different concentrations of NaCl (0, 0.3, 0.6, 0.9, 1.2, and 1.5%) were examined. Moisture and ash contents of samples containing 1.2% and 1.5% NaCl were significantly higher than those of the other samples (p<0.05). Protein contents decreased with increasing NaCl concentration. The pH values of batters significantly decreased with increasing NaCl concentration (p<0.05). The lightness values of uncooked and cooked samples showed an upward trend with increasing concentration of NaCl. Redness and yellowness values of uncooked batters containing 1.2% and 1.5% NaCl were significantly lower than other samples (p<0.05). The cooking yield and viscosity of the samples increased with increasing NaCl concentration. Samples containing 1.2% and 1.5% NaCl showed higher viscosities than the controls and samples containing 0.3-0.9% NaCl. Therefore, it can be concluded that addition 1.2% NaCl in chicken thigh products is beneficial.

• Journal of Adhesion and Interface
• /
• v.9 no.2
• /
• pp.8-15
• /
• 2008

Microcapsules have been widely used in cosmetics and pharmacology as controlled delivery devices of various active materials. Chitosan is the second most plentiful natural biopolymer with biocompatibility and nontoxicity. The chitosan microcapsules were prepared by the water-in-oil (W/O) emulsion method using glutaraldehyde as a crosslinking agent. Span80 was used as an emulsifier, and mineral oil was used as a medium material. Perfectly spherical microcapsules were obtained in the size range of $2{\sim}10{\mu}m$. The effects of emulsifier concentration and stirring speed on the average particle size and distribution were investigated. Encapsulation and release behavior of the microcapsules with different amount of the crosslinking agent (glutaraldehyde), different chitosan contents and different emulsifier concentration conditions were also investigated. The release rate of riboflavin was controlled by the crosslinking density of the chitosan and amount of emulsifier in the preparation of the microcapsule.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.730-735
• /
• 2005

Possibility of using low-molecular weight alginate as a wall material for encapsulation of fish oil was investigated. Encapsulation yield increased with increasing calcium chloride concentration up to 5% and was maintained thereafter, whereas slightly increased with increasing sodium alginate concentration up to 1.25% and decreased dramatically thereafter; emulsifier concentration had no effect on encapsulation yield. Loading efficiency increased with increasing content of core material. Encapsulation yields of low- and high-molecular weight alginates were similar, indicating low-molecular weight alginate can be used as wall material for encapsulation of fish oil.

• Applied Biological Chemistry
• /
• v.50 no.1
• /
• pp.12-17
• /
• 2007

A biosurfactant-producing strain, Bacillus subtilis TBM 3101 was isolated from the soil sample at Tae-Baek Mountain through an antifungal test and emulsification assessment. The strain was assessed, regarding to the microbial growth, by physical and chemical test, surface tension, emulsification activity and stability. The surface tension of the isolate sharply decreased to the minimum 29mN/m at 48 h growth. Of note, its emulsification was stabilized to the highest degree when tributyrin was utilized as a substrate, indicating that in comparison to a variety of synthetic surfactants, the biosurfactant produced by the isolate was significantly similar to synthetic surfactant, tween 20. In addition, the biosurfactant showed high emulsification activity when soybean oil, crude oil and tetradecane were used as a substrate. Thus, these studies could contribute to the detection and development of biosurfactant beneficial to the environment and humans.