• Journal of Adhesion and Interface
• /
• v.15 no.4
• /
• pp.151-160
• /
• 2014

A series of terpolymers based on stearyl methacrylate (SMA), n-methyol acrylamide (n-MAM), and 2-(perfluorooctyl) ethyl acrylate (PFOEA) were synthesized by changing PFOEA contents up to 8 wt% in order to obtain optimal water-repellent properties. In addition, various contents of m-isopropenyl-${\alpha}$,${\alpha}^{\prime}$-dimethylbenzyl isocyanate (TMI) from 1 to 4 wt% were added to the above terpolymers with 4 wt% of PFOEA content. The emulsion polymerization was carried out using tridecyl alcohol (EO)7 (TDA-7) as a nonionic surfactant, alkyl dimethyl amine derivatives (ADAD) as a cationic surfactant, and 2,2'-azobis(2-amidinopropane dihydrochoride) (AAPDL) as an initiator. The synthesized copolymers were characterized by FT-IR spectroscopies, contact angle, surface energy, and water-repellency. Surface and thermal properties were analyzed by SEM, TGA, and DSC. It was found that water repellency increased with increasing the contents of PFOEA and TMI.

• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.308-314
• /
• 2009

The acrylic rubber was synthesized by emulsion polymerization using n-butyl acrylate, n-butyl methacrylate, acrylonitrile, glycidylmethacrylate, and allyl methacrylate. When the contents of acrylonitrile were increased at fixed amount of crosslinking monomers, the Tg of polymers was increased with the contents of acrylonitrile, Mooney viscosity, hardness, and tensile strength also were increased. But the elongation was decreased due to the reduction of chain flexibility. The addition of the monomer for crosslinking, glycidylmethacrylate whose Tg is $56^{\circ}C$ resulted in the increased Tg of the polymer, and increased Mooney viscosity, hardness, and tensile strength, but the elongation at break was decreased with the glycidylmethacrylate contents. It was shown that this phenominon was attributed to the increment of crosslinking density by glycidylmethacrylate through the measurement of rheometer.

• Polymer Science and Technology
• /
• v.7 no.4
• /
• pp.412-424
• /
• 1996

• 프린팅코리아
• /
• v.12 no.8
• /
• pp.66-67
• /
• 2013

한국후지제록스가 공급하는 디지털 인쇄기에 적용되는 토너의 종류는 EA 토너, EA-에코 토너다. 잉크젯 제품인 FX 2800 잉크젯 컬러 프린팅 시스템에는 수성잉크가 적용된다. 잉크는 제록스에서 생산 공급하고 있다.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.669-675
• /
• 2008

Carbon black has been widely used in composites, tonor resin, and ink materials. Since carbon black readily agglomerates, it is important to disperse carbon black in real applications. Aiming to improve dispersion stability, carbon black was chemically oxidized to possess hydroxyl groups using a phase transfer catalyst at room temperature. The modified carbon black (CB-OH) was grafted by a silane coupling agent, p-methylacryloxypropyltrimethoxysilane, to carry teminal vinyl groups. The modified carbon black was subsequently used in miniemulsion polymerization to achieve encapsulted core-shell structure. Finally, well-encapsulated carbon black by polymer was obtained in the size range of 100-500 nm. Throughout the polymerization, the effects of surface modification, types of monomers, initiators, and emulsifiers were investigated.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.13-16
• /
• 2003

Vinyl acetate monomer can be polymerized through bulk, solution, emulsion, and suspension polymerization processes. However, in the preparation of PVA from bulk or solution polymerization, there are several technical limitations for obtaining high yield and high molecular weight simultaneously. Thus, the improvement of polymerization method is necessary to prepare the PVA with high yield and high molecular weight because that the difficulty in control of high viscosity and in removal of the heat of polymerization, which might lead to side reactions like branching. (omitted)

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.209-212
• /
• 2002

유화중합을 이용한 복합입자는 입자의 내외부 모두가 2종류 이상의 고분자물질로 조성된 유기-유기형과, 무기질 입자를 고분자물질로 피복한 무기-유기형 복합입자로 대별된다. 무기질의 분체와 유기질 고분자로 이루어지는 분산계 복합재료도 현재 실용화 되고 있는 복합재료중의 하나이지만 무기질 분체는 유기고분자와 그 성질이 현저히 다르기 때문에 소재간의 친화성, 복합체에서 무기분체의 분산상태 등이 복합재료의 물성 결정에 중요한 요인이 된다.(중략)

• Polymer Science and Technology
• /
• v.15 no.2
• /
• pp.198-208
• /
• 2004

입자의 크기 및 분산도에 관한 지식은 에멀젼 뿐만 아니라 aerosol, dispersion, suspension을 포함하는 미립자 계에서 중요한 정보이다. 특히 유화 중합에 있어서 입자의 크기 및 분산도의 정확한 측정은 중합 속도론 (입자의 생성, 성장 및 응집)을 다루는데 필수적이며, 입자의 크기 및 분산도는 hiding power, tinting strength 등 최종 물질의 물리$.$화학$.$기계적 성질 결정에 있어서 중요한 변수로 작용한다. 합성 공정에서도 입자의 크기 및 분산도는 콜로이드의 점도에 많은 영향을 미쳐서 공정의 안정성을 좌우하기도 한다.(중략)

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.429-435
• /
• 2009

The pressure sensitive adhesives (PSA) were synthesized by soap-free emulsion polymerization of acrylic monomers such as butyl acrylate, 2-ethyl hexyl acrylate, and acrylic acid in the presence of starch as a protective colloid and copolymer. The peel strength and holding power of PSA were increased with starch contents due to the enhancement of gel content, But the initial tackiness of PSA was decreased with starch contents. The contact angle analysis of PSA indicated that the wettability was increased with starch contents owing to the increase of polarity by hydroxy group in starch. In the pH measurement of emulsion with time for biodegradability, the starch in the PSA accelerated the lowering of pH due to the formation of organic acids followed by decomposition of starch.

• Elastomers and Composites
• /
• v.45 no.4
• /
• pp.272-279
• /
• 2010

Starch is an environmental-friendly natural source, more interests are attracted to use starch for synthesis of composites and coating sols. Starch-acrylic coating sols for architectural materials were synthesized by emulsion polymerization. The structures of synthesized materials were characterized by using Infrared spectra, $^1H$-NMR spectra, and physical characteristics were investigated by X-ray diffraction, foaming test, whiteness test, gloss test and tensile strength test. XRD results showed that starch in starch-acrylic copolymer matrix was in an amorphous state. Starch-acrylic emulsion was compounded with 1%, 3%, 5% foaming agent (n-pentane) and 60% $CaCO_3$ solution. The results showed that starch and foaming agent could increase the foamability. Tensile strength increased with the enhancement of starch and foaming agent concentration. But whiteness and gloss decreased with increase of starch and foaming agent concentration.