• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.2
• /
• pp.53-64
• /
• 2013

This study analyzed the ADCP records along with wind by KMA and discharge records at Seosan A-, B-district tide embankment by KRC for 33 days obtained in the Chunsu Bay, Yellow Sea, Korea spanning from July 29 to August 30, 2010. Various analyses include descriptive statistics, harmonic analysis of tidal constituents, spectra and coherence, complex correlation, progressive vector diagram and cumulative curves to understand the tidal and sub-tidal current characteristics caused by local wind and discharge effect. Observed current speed ranges from -30 to 40 (cm/sec), with standard deviation from 1.7 (cm/sec) at bottom to 18.7 (cm/sec) at surface. According to the harmonic analysis results, the tidal current direction show NNW-SSE. The magnitudes of semi-major axes range from 9.4 to 14.8 (cm/sec) for M2 harmonic constituent and from 4.4 to 7.0 (cm/sec) for S2, respectively. And the magnitudes of semi-minor axes range from 0.1 to 0.5 (cm/sec) for M2 and from 0.4 to 1.4 (cm/sec) for S2, respectively. In the spectral analysis results in the frequency domain, we found 3~6 significant spectral peaks for band-passed wind and residual current of all depth. These peak periods represent various periodicities ranging from 2 to 8 (days). In the coherency analysis results between band-passed wind and residual current of all depth, several significant coherencies could be resolved in 3~5 periodicities within 2.8 (days). Highest coherency peak occurred at 4.6 (day) with 1.2-day phase lag of discharge to band-passed residual current. The progressive vector of wind and residual current travelled to northward at all layers, and the travel distance at middle layer was greater than surface layer distance. The Northward residual current was caused by a seasonal southern wind, and the density-driven current formed by fresh water input effected southward residual current. The sub-tidal current characteristics is determined by seasonal wind force and fresh water inflow in the Chunsu Bay, Yellow Sea, Korea.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.5
• /
• pp.39-53
• /
• 2007

Generally, fractured medium can be described with some key parameters, such as hydraulic conductivities or random field of hydraulic conductivities (continuum model), spatial and statistical distribution of permeable fractures (discrete fracture network model). Investigating the practical applicability of the well-known conceptual models for the description of groundwater flow in fractured media, various types of hydraulic tests were applied to studies on the highly fractured media in Geumsan, Korea. Results from single-hole packer test show that the horizontal hydraulic conductivities in the permeable media are between $7.67{\times}10^{-10}{\sim}3.16{\times}10^{-6}$ m/sec, with $7.70{\times}10^{-7}$ m/sec arithmetic mean and $2.16{\times}10^{-7}$ m/sec geometric mean. Total number of test interval is 110 at 8 holes. The number of completely impermeable interval is 9, and the low permeable interval - below $1.0{\times}10^{-8}$ m/sec is 14. In other words, most of test intervals are permeable. The vertical distribution of hydraulic conductivities shows apparently the good correlation with the results of flowmeter test. But the results from the cross-hole test show some different features. The results from the cross-hole test are highly related to the connectivity and/or the binary properties of fractured media; permeable and impermeable. From the viewpoint of the connection, the application of the general stochastic approach with a single continuum model may not be appropriate even in the moderately or highly permeable fractured medium. Then, further studies on the investigation method and the analysis procedures should be required for the reasonable and practical design of the conceptual model, with which the binary properties, including permeable/impermeable features, can be described.

• Journal of agricultural medicine and community health
• /
• v.31 no.1
• /
• pp.35-46
• /
• 2006

Objectives: In recently. the management and protection on individual information in patient's medical & nursing records have been very important, and that need a guideline. The purpose of this study was to investigate the status of using the patient's nursing records of nursing students in clinical practice, to find and discuss the patient's informed consent, and status of education and management concerned to patient's nursing records. Methods: This study used a mailing survey. data collected from September 24th to October 31th in 2002. The subject were 333 professors who are major in adult nursing, pediatric nursing, psychological nursing of 111 university of nursing department and nursing college. And then we received the survey mail from 103 professors that respondent rate was 30.9%. Results: The characteristics of study subjects showed 49.0% of university. 51.0% of college of nursing. 50.0% of the subjects practiced point the patient by oral approval in clinical practice. But when the decision of the patient was very difficult, 21.6% of the subjects take to informed consent from his or her families. During the clinical practice, 49.0% of the subjects were explain to patient about clinical practice and contents of the nursing student, only 7.8% of the subjects were explain to patient with nursing records. 52.0% of the subjects were took out records from the hospital, only 17.6% of the subjects had standard of the patient's informed consent and standard of handling practice records. 17.6%-92.2% of the subjects that educate and manage concern to patient's nursing records.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.365-376
• /
• 2006

The purpose of this study was to evaluate the efficacy of blocking the oxygen in the air during the polymerization of sealant. All curing were performed with various light curing units under the application of oxygen gel barrier, stream of nitrogen and carbon dioxide gas for inhibition of oxygen diffusion into sealant surface. The results of present study can be summarized as follows : 1. The amount of eluted TEGDMA form the specimens cured with all the three different light units in the stream of $N_2$ and $CO_2$ gas and application of Oxygen gel barrier($DeOx^{(R)}$) were significantly lower than in the room-air atmosphere (Control) (p<0.05). 2. In the $DeOx^{(R)}$ application, the amount of eluted TEGDMA the specimen cured with PAC light for 10seconds was less than that cured in the stream of $N_2$ and $CO_2$ atmospheric conditions (p<0.05) 3. In the LED using 10 or 20sec irradiation times under the stream of $N_2$ and $CO_2$, the eluted TEGDMA showed to be no statistically significant difference (p>0.05). 4. The microhardness from the specimens cured with all the three different light units under each treated conditions were significantly higher than in the room-air atmosphere (p<0.05). 5. The surface treatment by $DeOx^{(R)}$, $N_2$ and $CO_2$ reduces the thickness of oxygen inhibited layer by sp proximately 49% of the untreated control value.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.93-105
• /
• 1993

In this paper, the maximum scour depths at piers located in the Bo Cheong Stream, which is a tributary in the Geum River System, were calculated and compared using 24 local pier scour equations. The equations were classified as six groups by non-dimensional types of equations. The geometric data in the stream bed and pier data at San Seong, Yi Pyung and San Gye, which are IHP data collection stations, were utilized for applying the scour equations. The geometric data in the stream bed were obtained by analyzing the bed material sampled in three stations which are in the left side, middle and right side for stream direction. The maximum flow velocities at maximum flow depths which were measured from 1982 to 1991, were used as the hydraulic flow data. The pier data for predicting pier scour depths were measured in the fields. The maximum pier scour depths calculated using the equations were compared with the held scour depths measured in the streams or rivers in the world. Arunachalam, Shen-Karaki III, Jain-Fischer equations are selected as the proper local scour equations for predicting the maximum local scour depths at piers in the Bo Cheong Stream. Inglis-Lacey and Shen-Karaki II equations are applicable in case of rapid flows conditions in which Froude number is over 0.3. Froehlich, Laursen I, Laursen II, Neill, Melville equations are applicable in the slow flow conditions in which Froude number is less than 0.3. Blench equation or Inglis-Poona equation varies rapidly by changing Froude numbers. Therefore the equations should not be used without careful considerations in selecting the applicable ranges. The maximum local scour depths calculated using Sarma-Krishnamurthy, Ahmad, Coleman, Varzeliotis, Larras, Bata, Chitale, Venkatadri, Basik-Basamily-Ergun, U.S.G.S., Shen I equations are usually less than the scour depths measured in the fields.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.332-343
• /
• 2005

The purpose of this study was to evaluate the influence of soft-start light curing on contraction stress and hardness of composite resin. Composite resin mold was cured using the one-step continuous curing method with three difference light sources; conventional halogen light curing for 40 seconds at $400\;mw/cm^2$, plasma arc light curing for 6 seconds at $1300\;mW/cm^2$ and LED light curing for 10 seconds at $7The purpose of this study was to evaluate the influence of soft-start light curing on contraction stress and hardness of composite resin. Composite resin mold was cured using the one-step continuous curing method with three difference light sources; conventional halogen light curing for 40 seconds at . For the soft-start curing method ; 2 seconds light exposure at $650\;mW/cm^2$ followed by 3 seconds at $1300\;mW/cm^2$ and exponential increase with 5 seconds followed by 10 seconds at $700\;mW/cm^2$ were used. Contraction stress was measured using strain gauge method and Vickers hardness was measured 24 hours after polymerization at the top and bottom of specimens. Resin-acrylic interfaces were observed using a scanning electron microscope(SEM). The results of present study can be summarized as follows: 1. Contraction stresses at 10 min after polymerization were significantly reduced with the soft-start curing both in plasma and LED light sources(P<0.05). 2. Plasma light curing with soft-start resulted in not only the lowest contraction stress, but also the lowest hardness(P<0.05) 3. LED light curing with soft-start showed lower contraction stress than the one-step continuous halogen and LED light curing(P<0.05). 4. Microhardness of specimens cured by LED light with soft-start was equivalent to that of cured by the one-step continuous halogen and LED light(P>0.05). 5. Curing by LED light with soft-start and conventional halogen light resulted in better marginal sealing than plasma light and one-step LED light curing.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.312-320
• /
• 2005

The purpose of this study was to evaluate the polymerization contraction and the microhardness of compostie resin($Supreme^{(R)}$, Filtek $Flow^{(R)}$, 3M-ESPE, USA) according to irradiation modes of LED curing unit(Elipar $Freelight^{(R)}$, 3M-ESPE, USA). The strain guage method was used for determination of polymerization contraction. Sample were divided by 6 groups according to curing modes and filling method. Group A: $Supreme^{(R)}$, Filtek $Flow^{(R)}$ lining, 10seconds curing, Group B: $Supreme^{(R)}$, Filtek $Flow^{(R)}$ lining, 15seconds curing, Group C: $Supreme^{(R)}$, Filtek $Flow^{(R)}$ lining, 15seconds soft start curing, Group D: $Supreme^{(R)}$ only, 10seconds curing, Group E: $Supreme^{(R)}$ only, 15seconds curing, Group F: $Supreme^{(R)}$ only, 15seconds soft start curing. Preparations of acrylic molds were followed by filling and curing. Strain guage attached to each sample were connected to a strainmeter. Measurements were recorded at each second for the total of 10 minutes including the periods of light application. And microhardness of each group after 24hours from light irradiation were measured. Obtained data were analyzed statistically using Repeated measures ANOVA and Tukey test. The results of the present study are as follows: 1. In flowable resin liner group, soft start curing group was not found decrease of polymerization contraction. But, In Supreme only filling group, the lowest polymeriation contraction was found in soft start curing group. 2. 10 seconds curing group showed statistically significant reduction of polymerization contraction compared with 15 seconds curing group(p<0.05). 3. The microhardness values of each group not revealed significant difference(p>0.05). But, lower surface microhardness was not reached 80% of upper surface microhardness.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.236-246
• /
• 2004

Artificial carious lesions in various depths were observed with visual examination using light transillumination, bite-wing radiography, laser fluorescence, and dye-enhanced laser fluorescence to determine the reproducibility, correlation of each diagnostic method, diagnostic sensitivity and diagnostic specificity. And optical densities according to demineralized times were measured whether laser fluorescence could be used as a quantitative diagnostic method. The following results were obtained whether laser fluorescence could be used for diagnosis of initial proximal caries. 1. Tau-c values of visual examination was 0.08 which showed lowest reproducibility and those of bite-wing radiography, laser fluorescence, dye-enhanced laser fluorescence were 0.60, 0.48, and 0.64, respectively which showed relatively high reproducibility. 2. The correlation between demineralization time and each examination was the highest in dye-enhanced laser fluorescence$({\gamma}=0.51)$ followed by laser fluorescence$({\gamma}=0.43)$, bite-wing radiograph$({\gamma}=0.35)$, and visual examination$({\gamma}=0.33)$. Dye-enhanced laser fluorescence and laser fluorescence showed significant correlation with demineralization time. 3. The sensitivity of laser fluorescence and dye-enhanced laser fluorescence for diagnosing approximal caries based on bite-wing radiography were 67%, 100% and those of specificity were 57%, 11% which showed diagnostic specificity was relatively lower than sensitivity. 4. The difference in optical density(DFR) between sound teeth and carious lesions according to lesion depth was high with dye-enhanced laser fluorescence compared with laser fluorescence. DFR measured with laser fluorescence according to changes in lesion depth was statistically significant but was not statistically significant with dye-enhanced laser fluorescence. Based on these results, laser fluorescence and dye-enhanced laser fluorescence have comparable diagnostic power as bite-wing radiography in early diagnosis of proximal caries.

• Journal of Veterinary Clinics
• /
• v.24 no.2
• /
• pp.225-228
• /
• 2007

The therapy by injection-acupuncture (AP) with bee-venom (apitoxin) and injection-AP with apitoxin combined by administration of Chinese herbal medicine was applied in 2 cases with canine intervertebral disc disease (IVDD). Case 1 was diagnosed as thoraco-lumbar IVDD (T11-T12, T12-T13, L3-L4 and L4-L5) and case 2 was diagnosed as IVDD at T10-T11 and T12-T13, respectively Injection-AP with apitoxin($Apitoxinc{(R)}$, total $200{\mu}g$ of apitoxin, 0.1 ml/acupoint) plus physical exercise (walking with gocart, TID/day) and aquatherapy (swimming treatment, BID/week) were given to each patient. The used acupoints were GV20 (Bai Hui), GB30 (Huan Tiao), ST36 (Zu San Li), GB34 (Yang Ling Quan), ST40 (Feng Long), ST41 (Jie Xi) and BL40 (Wei Zhong), the lesions, and trigger points. In addition, Chinese herbal medicine (Koda Pharmaceutical Co., Taiwan) including Zheng Gu Zi Jin Dan (正骨紫金丹 : 1 g), Shiuh Duann(續斷 : 0.2 g), Du Zhong(杜仲 : 0.2 g), Mo Yao(沒藥 : 0.2 g), Ru Xian(乳香 : 0.2 g) and Pyrite(自然銅 : 0.2 g) were orallly mdeicated BID for 0\9days in case 2. Walking was possible after session 11 for 4 weeks in case 1 and after session 6 for 2 weeks in case 2, respectively.

• (The)Study of the Eastern Classic
• /
• no.37
• /
• pp.127-159
• /
• 2009

This paper is about the conception of "Hwangjoin(皇朝人)" during the reign of King Youngjo in the Joseon Dynasity. Originally, Hwangjoin meant the Chinese people till the mid-term of the Joseon Dynasty but the meaning was changed to the immigrants from the Ming(明) dynasty in reign of King Youngjo. They were Han Chinese(漢族) and moved to the Joseon between the Japanese Invasion in 1592 and the Manchu war in 1636. The Joseon government gave a warm welcome to them. Two wars made the Joseon government pay attention to the national restoration and served the entrance of 'Sallim(山林)' on the central government as a momentum. Song, Siyeol(宋時烈) was the leader of Sallim, who made an issue of 'Daecheong-boksu Discourse(對淸復讐論;to revenge on Ching(淸) Dynasty)' like a way of 'Bukbeol(北伐;to attack Ching Dynasty)'. His plan came to fail because of the death of King Hyojong and was replaced with Jonju Discourse(尊周論;respect for Zhou Dynasty). Daebodan(大報壇) was built in the reign of King Sukjong, which meant Joseon got the justness that they inherited from the Ming Dynasty. Later Daebodan expanded and it led to works in honor of loyal subjects and patriots, victims of two wars and a policy of a warm reception for Hwangjoin. King Youngjo did his best to theorize Daemyeong Euiri Discourse(對明義理論) and Jonju Discourse for himself. His efforts came out as a spread of conception on Pungcheon(風泉;fengquan), publication and education of Eoje-seo (御製書) and making literary works(英祖御製). King Youngjo employed many policies for Hwangjoin. First, operation of Chungnyanggwa(忠良科) opened a door for them to go into politics. Second, descendants of Hwangjoin had charge of Hwangdan's guard(皇壇 守直) posts. and joined in the sacrificial rites of Ming Emperors. Third, they could have government jobs and honorary posts for ancestors' merits. Fourth, a list of Hwangjoin, "Hwainlok(華人錄)" was published and they got preferential treatment unlike Hyanhwain(向化人). King Young's Pungcheon(風泉) had an effect on literature such as Lee, Gyusang(李奎象)'s "Beong-sejaeunlok(幷世才彦錄)" and Song, Gyubin(宋奎斌)'s Pungcheon-yuhyang(風泉遺響)". The general people of Joseon were jealous and envious of them because of special treatment polices for Hwangjoin. So people wanted to be included in Hwangjoin as far as possible and there were cases of pretending to be a Hwangjoin. The conception of "Hwangjoin(皇朝人)" during the reign of King Youngjo was realized as the policy for Hwangjoin based on Daemyeong Euiri Discourse (對明義理論) and Jonju Discourse(尊周論). It was a way of becoming clear about Joseon's position in political principle.