• Journal of computational fluids engineering
• /
• v.6 no.2
• /
• pp.9-21
• /
• 2001

초음속 여객기의 천음속 순항 성능을 개선하기 위하여 날개의 플랩 꺽임각을 최적화하였다. 이를 위하여 3차원 Euler 코드와 adjoint 코드를 이용한 최적설계기법을 적용하였다. 설계변수로서, 앞전플랩 5개, 뒷전 플랩 5개 등 총 10개의 플랩의 꺽임각이 사용되었다. 설계과정중에 격자계 내부격자점의 수정을 위해 타원형방정식법을 이용하였다. 계산 시간의 단축을 위해 내부격자의 민감도는 무시하였다. 또한 본 설계문제에 근사구배기법의 적용가능성 여부를 조사하였다. 충격파가 없는 경우 앞전 플렙에 한하여 근사구배기법을 적용할 수 있음을 알았다. 최적설계기법으로 BFGS기법을 적용하여 항력을 최소화하였으며, 양력 및 날개 표면 마하수에 대한 제약조건을 적용하였다. 앞전 플랩의 최적화 및 앞전과 뒷전 플랩의 최적화 등 두 개의 설계 문제를 고려하였다. 성공적인 결과를 얻음으로써 본 설계방법의 타당성 및 효율성을 확인하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1275-1280
• /
• 2006

자연 저항체인 식생은 유체역학적으로 하천의 평균흐름과 난류량을 변화시키며, 이와 관련하여 유사, 영양 물질, 용존 산소, 그리고 서식 동물 등에 많은 영향을 미치는 것으로 알려져 있다. 과거에는 식생된 수로의 흐름을 식생에 의해 항력이 증가된 경계층 흐름으로 단순하게 보아 왔으나, 근래의 실험유체역학적 연구는 식생된 하천 흐름에 대한 미시적인 구조를 규명하였다. 본 연구는 식생수로에서 평균흐름 및 난류량에 관한 수리특성을 분석하고자 하며, 부유사의 퇴적, 유입, 이송 등의 거동에 큰 영향을 미치는 것으로 알려진 고유구조를 파악하였다. 식생된 개수로 흐름의 일반적인 평균흐름 및 난류구조는 기존의 연구결과와 동일하였으며, 본 연구에서 중점을 둔 고유구조의 경우, 식생높이를 기준으로 하여 상 하부의 흐름특성이 서로 상이한 것을 확인하였다. 식생높이 상부에서는 유속이 수면방향을 향하는 분출현상이 지배적으로 나타났으며, 식생높이 하부에서는 이와는 반대로 유속의 변동성분이 하상으로 향하는 쓸기현상이 지배적으로 나타났다. 이는 개수로에 식생이 존재할 경우 부유사의 농도분포가 수심에 따라 일정해지는 것에 대한 물리적인 근거로 파악된다.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.166-171
• /
• 2004

Direct numerical simulations are peformed to investigate the physics of a spatially developing turbulent boundary layer flow suddenly subjected to spanwise oscillating electro-magnetic forces in the near-wall region. The Reynolds number based on the inlet momentum thickness and free-stream velocity is $Re_\theta=300$. A fully-implicit fractional step method is employed to simulate the flow. The mean flow properties and the Reynolds stresses are obtained to analyze the near-wall turbulent structure. It is found that skin-friction and turbulent kinetic energy can be reduced by the electro-magnetic forces. Instantaneous flow visualization techniques are used to observe the response of streamwise vortices to spanwise oscillating forces. The near-wall vortical structures are clearly affected by spanwise oscillating electro-magnetic forces.

• 한국전산유체공학회:학술대회논문집
• /
• 2001.05a
• /
• pp.60-65
• /
• 2001

The projectile afterbodies for zero-lift drag reduction has been analyzed using the Navier-Stokes equations with the $\kappa-\epsilon$ turbulence model. The numerical method of a second order upwind scheme has been used on unstructured adaptive meshes. Base drag reduction methods that have been found effective on axisymmetric bodies include boattailing, base bleed, base comustion, locked vortex afterbodies and multistep afterbodies. In this paper, the charateristics of turbulence flow have been studied for geomeries of multistep afterbodies. The important geometrical and flow parameters relevant to the design of such afterbodies have been identified by number, length and height of step. The flow over multistep afterbodies has been analyzed including expansion waves, recompression waves, recirculating flow, shear flow and wake flow. The numerical results have been compared and analyzed with the experimental datum.

• Journal of computational fluids engineering
• /
• v.8 no.4
• /
• pp.26-33
• /
• 2003

Smart UAV Development Program, one of the 21c Frontier R&D Program sponsored by MOST(Ministry of Science and Technology), was launched in 2002 As an air vehicle for the Smart UAV, CRW(Canard Rotor/wing) concept was one of the candidates compared in trade-off study. The CRW concept has not only been proven completely but its aerodynamic characteristics not known in detail yet. Two calculation methods were adopted in this study to obtain aerodynamic data for the CRW First method was the superpose DATCOM method which is capable of three lifting sufaces, and second one is the full Navier-Stokes computation around CRW configuration using overset grid method. Basic aerodynamic characteristics of the CRW configuration was analyzed and the minimum drag level with lift to drag ratio is presented. The peculiar flow characteristics around rotor/wing and hub were also examined and considered in the configuration design.

• Journal of computational fluids engineering
• /
• v.5 no.3
• /
• pp.32-39
• /
• 2000

3차원 Euler 방정식과 adjoint법을 이용한 공력설계코드를 개발하였으며, 이를 초음속수송기의 주날개 설계에 적용하였다. 표면형상의 변화를 위해 Hicks-Henne함수를 사용하였으며, 내부격자점의 수정을 위해 타원형방정식법을 이용하였다. 나셀의 수직이동과 관련되지 않은 설계변수에 대해서는 내부격자점의 이동을 무시함으로써 계산시간을 크게 단축할 수 있었다. 양력과 날개단면두께를 일정하게 유지하면서 항력을 최소화하도록 단면형상을 최적화하였으며, 성공적인 결과를 얻음으로써 본 설계시스템의 타당성 및 효율성을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.9
• /
• pp.754-763
• /
• 2007

Flow-induced forces on two identical nearby circular cylinders immersed in the cross flow at Re=100 were numerically studied. We consider all possible arrangements of the two circular cylinders in terms of the distance between the two cylinders and the inclination angle with respect to the direction of the main flow. It turns out that significant changes in the characteristics of flow-induced forces are noticed depending on how the two circular cylinders are positioned, resulting in quantitative changes of force coefficients on both cylinders. Collecting all the numerical results obtained, we propose a contour diagram for drag coefficient and lift coefficient for each of the two cylinders. The perfect geometrical symmetry implied in the flow configuration allows one to use those diagrams to estimate flow-induced forces on two identical circular cylinders arbitrarily positioned in physical space with respect to the main flow direction.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.223-226
• /
• 2006

Computational Study of a sphere subjected to free stream flow and simultaneously subjected to spinning motion is carried out. Three dimensional compressible Navier-Stokes equations are solved using fully implicit finite volume scheme. SST(Shear Stress Transport) $k-{\omega}$ turbulence model is used. Aerodynamic characteristics being affected are studied. Validation of the numerical process is done for the no spin condition. Variation of drag coefficient and shock wave strength with increase in spinning rate is reported. Changes in the wake region of the sphere with respect to spinning speed are also observed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.191-193
• /
• 2017

EFD-CFD Comparison Workshop was proposed based on the drag prediction workshop and high lift prediction workshop of AIAA. This workshop is organized to escalate the levels of wind tunnel test and computational fluid dynamics and to escalate the level of domestic aerodynamic technology through the collaboration of both areas. For three benchmark cases of which wind tunnel test results are available, comparison workshops have been held since 2015.

• Journal of computational fluids engineering
• /
• v.9 no.4
• /
• pp.48-54
• /
• 2004

Vortex-shedding flows past a circular cylinder for 200≤ Re ≤ 5000 are numerically simulated with the PowerCFD code, using a finite volume method and an unstructured grid system, developed by the author. The simulation is peformed by solving the unsteady 2-D Wavier-Stokes equations with both no model and turbulence model. The resulting Reynolds number dependence of the Strouhal number and of the drag and lift coefficients is compared with both experiments and previous numerical results. It is found that, in the range of 200≤ Re ≤ 5000 the calculation method with a turbulence model is capable of producing reasonably more accurate results than that with no model for the main practically relevant parameters such as Strouhal number, drag and lift coefficients.