• 수산해양기술연구
• /
• 제23권3호
• /
• pp.117-126
• /
• 1987

연구에서는 작동 유체중에 포집되어 있는 불용성 포집 계면층을 통과하는 금속입자 운동에 대한 특성을 조사하기 위하여 상호 불용인 착색 글리세린수용액과 사염화탄소 등의 계면층을 만들고 단일강구를 하강시켜 이 계면을 통과 할 때의 계면의 변화에 의한 유체 이동의 궤적과 그 후연에 생기는 기포체적에 관한 이론해석 및 실험분석을 통하여 다음의 결론을 얻었다. 1. 상층액 내에서의 강구 하강에 의한 유체 이동궤적은 상층액과 하층액의 비중 및 점도가 모두 같은 경우를 제외하고는 상층액의 두께에 영향을 받는다. 2. 하층액의 점도가 상층액의 점도와 같거나 큰 경우의 불용성 계면에서는 용액의 물성치에 관계없이 그 궤적 형상이 일정하고, 하층액의 점도에 의해 지배적이며 그 궤적의 형상은 다음과 같다. (1)/(V-2.35)=0.014+0.038$\mu$l super(-1) + 0.028$\mu$l super(-2). 3. 하층액의 점도가 상층액의 것보다 큰 경우의 유체 이동궤적의 체적은 구의 하강거리와 상하층액의 점도비에 의해 다음과 같다. V(Sr) super(0.34)=7.86a super(-2.08). 4. 후류기포생성체적의 비는 R sub(e)수가 100 이하에서 R sub(e)수에 의존하나 그 이상에서는 M sub(0)수의 영향이 지배적이며 그의 상관식은 다음과 같다. (V sub(w)/V sub(b))M sub(0) super(-0.22)=0.012R sub(e) super(1.53) ; R sub(e)<100. (V sub(w)/V sub(b))M sub(0) super(-0.22)=62.5 ;R sub(e)>100

• 한국전산유체공학회지
• /
• 제15권2호
• /
• pp.71-78
• /
• 2010

As a step toward accurate prediction of droplet impingement and ice accretion on aircraft, an Eulerian-based droplet impingement and ice accretion code for air flows around an airfoil containing water droplets is developed. A CFD solver based on the finite volume method was also developed to solve the clean airflow. The finite-volume-based approach for simulating droplet impingement on an airfoil was employed owing to its compatibility with the CFD solver and robustness. For ice accretion module, a simple model based on the control volume is combined with the droplet impingement module that provides the collection efficiency. To validate the present code, it is compared with NASA Glenn IRT (Icing Research Tunnel) experimental data and other well-known icing codes such as LEWICE and FENSAP-ICE. It is shown that the collection efficiency and shape of ice accretion are in good agreement with previous experimental and simulation results.

• 한국전산유체공학회지
• /
• 제16권2호
• /
• pp.88-93
• /
• 2011

A numerical study of subcooled onset of nucleate boiling (ONB) in a micro-channel under pulsed heating using volume of fluids (VOF) model was conducted. The VOF simulation adopting the existing experimental condition is compared to the experimental data. The time to ONB was determined when the void fraction at the microheater surface first appeared. The theoretical superheat for homogeneous nucleation relatively predicts the transient ONB results of convective flow of water well based on local temperature distribution. It was found that once heat load increases at the heater, transient flow boiling starts to occur faster.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.211-217
• /
• 2009

The numerical program has been developed for the purpose of the complicate geometries application using CIP method. The non-staggered, non-orthogonal, and unstructured grid system can be also used for the various geometries in the program. For validating CIP solver, the lid-driven cavity flow and solitary wave propagation flow are carried out. Test results show a good agreement with the verified results. The dynamic solver was used for the behavior of moving body. Interface process between the two solvers is introduced. The research was performed on the flow problem around torpedo and log and the flow problem in a tank in order to analyze the three phase flow problem Although the comparison to the verified results was not quantitatively performed, the trend of the results was reasonable.

• 한국전산유체공학회지
• /
• 제19권4호
• /
• pp.52-60
• /
• 2014

Recently, coastal structures have been built to protect coastal areas. However, if a tidal wave caused by an earthquake hits the coast, it would cause catastrophic damages. It is important to analyze the basics and the characteristics of a tsunami to reduce damages caused by natural disasters. In this study, a tsunami passing over different topographical changes is simulated with VOF method based on FVM(Finite Volume Method). The reduction of both scale and velocity is accomplished by similarity analysis, and an initial energy is generated by increasing the water level as needed to create a tsunami as if it is caused by a crustal movement. It is found that the present method is appropriate to simulate the tsunami with its mechanism.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1988-1991
• /
• 2005

A micro fluid actuator driven by electromagnetic force at MEMS(Micro Electro Mechanical System) level has been designed. The operation of the actuator was simulated in three steps. First, fluid flow analysis has been performed to determine the actuator load. With the load, dynamic behavior of the actuator structure has been analysed. Finally, fluid-structure interaction analysis has been performed to predict the performance of the actuator. To avoid excessive amount of computation, axisymmetric and plane strain 2-D models were used.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.446-447
• /
• 2010

최근 개발된 니켈 초합금 금속폼은 기존의 매연저감장치 신소재로 여겨지고 있다. 금속폼은 세가지 두드러진 특징을 갖고 있다. 첫째, 금속폼은 큰 기공의 다공성 매질로써 매연을 포집하여 축적할 수 있는 용량이 기존 필터에 비해 상대적으로 크며 그로인하여 재생 시 연소 안전성이 두드러진다. 둘째, 복잡하고 굴곡있는 기공 구조와 큰 비표면적은 물질전달 특성을 향상시켜 촉매 적용 시 촉매의 전환성능을 향상시키고 그로 인하여 귀금속 촉매량을 줄일 수 있는 장점이 있다. 셋째, 금속폼은 다양한 기공크기를 가지며, 다양한 조합의 금속폼을 개발할 수 있어 요구 성능에 따른 최적의 필터 설계를 가능케 한다. 이번연구에서는, 금속폼의 필터 성능을 다양한 실험을 통하여 측정 평가하며, 이런 이해를 기반으로 필터로 제작하여 엔진실험벤치에서 그 성능을 검증하였다. 필터의 성능은 수트 포집효율과 그에 따른 필터의 압력강하와 촉매 활성 능력으로 평가되었다. 이러한 실험과 병행하여 금속폼에서의 수트 포집과정을 모델링하고 이를 상용 프로그램인 CFD-ACE+에 추가하여 설계전용 프로그램을 개발하였으며, 엔진실험결과와 비교 검증하였다. 본 논문에서는 금속폼의 높은 매연축적용량과 향상된 물질전달 특성이 어떻게 필터의 귀금속 촉매와 체적을 줄일 수 있는지 제시하고 있다.

• 한국전산유체공학회지
• /
• 제15권4호
• /
• pp.99-108
• /
• 2010

Fractional Step Methods(FSM) are popular in simulation of unsteady incompressible flow. In this study, we demonstrate that FSM, combined with a Volume-Of-Fluid method, can be further applied to simulation of multiphase flow. The interface between the fluids is constructed by the effective least squares volume-of-fluid interface reconstruction algorithm and advected by the velocity using the operator split advection algorithm. To verify our numerical methodology, our results are compared with other authors' numerical and experimental results for the benchmark problems, revealing excellent agreement. The present FSM sheds light on accurate simulation of turbulent multiphase flow which is found in many engineering applications.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.75-77
• /
• 2011

Thermofluid flow analysis is major subject in most computational fluid dynamics applications. Accompanying convective and conductive heat transport phenomena, radiation plays an important role in high temperature operating systems. Cares in which the radiation dominates are found in such systems as boilers, furnaces, rocket engines, etc. In this paper the finite-volume method (FVM) are employed to simulate two-dimensional radiation problems in concentric and eccentric horizontal cylindrical annuli with general body-fitted coordinates. In that case the simplest and intuitive remedies are proposed for mitigation of ray effect.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2762-2772
• /
• 1994

Branch flows for Newtonian and non-Newtonian fluids are simulated by the finite volume method. The modified power-law model is employed as a constitutive equation of the non-Newtonian fluids. Numerical analyses are focused on understanding of flow patterns for different values of branch angles, diameter ratios and Reynolds numbers. The numerical results are compared with the existing experimental data. The calculated velocity profiles and pressure variations are in good agreement with available experimental results.