• Product Safety
• /
• s.197
• /
• pp.60-65
• /
• 2010

최근 국민 모두가 사용하고 있는 헤어 드라이어가 기능도 다양하고 인간 뿐만 아니라 애견용 등 사용 용도가 다양화 되고 있는 추세이다. 더구나 국민 생활 수준의 향상으로 인해 과거에는 단순히 머리를 건조하는 목적에서 현대에는 헤어 스타일의 변형 모발의 보호기능을 추가한 헤어 드라이어의 출시 등으로 개개인의 헤어 스타일의 창조 및 건강한 모발을 유지하려고 하는 소비자의 욕구를 충족 시키기 위해 끊임없이 발전하고 있는 헤어드라이어에 대해 알아보기로 한다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.4
• /
• pp.121-129
• /
• 2001

The semi-adiabatic temperature rise and the losses of temperature of cement paste, mortar and concrete were measured by an apparatus of semi-adiabatic temperature. Heat of hydration was measured by a conduction calorimeter and adiabatic temperature rise of concrete was measured by an adiabatic calorimeter. The derived equation which can assume the adiabatic temperature was proposed by measuring the semi-adiabatic temperature of concrete. The maximum adiabatic temperature rise of concrete obtained by the derived equation of adiabatic temperature, $T_{ad}(t)=T_{sad}(t)+T_{dis}(t)$, showed $55^{\circ}C$ approximately and it had good relation with the other one obtained by the heat of hydration of cement paste and with maximum value which was measured by the adiabatic calorimeter. The adiabatic temperature rise obtained by derived equation was a different information in comparison with the value obtained by adiabatic temperature rise equations by Hell and et. al. in early age, but it showed similar tendencies with the other one according to elapsed time. Adiabatic temperature rise of lich mix concrete with highly cement content was predicted. The adiabatic temperature rise of cement paste and mortar obtained by derived equation from us showed comparatively matching results to compared with that of obtained by adiabatic temperature equation from concrete standard specification.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.4
• /
• pp.69-77
• /
• 2012

The construction data should be controlled from the life-cycle perspective. The current PMIS (Project Management Information System) usually focuses on the construction operation stage. The PMIS does consider the utilization of the construction in the maintenance of constructed facilities. This paper tries to interface the construction data with the maintenance data for effective use of construction data in the life-cycle perspective. To achieve the research objective, a maintenance breakdown structure is established and connected to the work breakdown structures. The connection of the two breakdown structures provide a structured utilization of construction data for efficient maintenance work activities. A prototype suggests that the interface of maintenance and work breakdown structures can help provide a construction and maintenance data in a more efficient way for maintenance activities.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.869-878
• /
• 2021

This study is a study on 11-story apartments that increase the event of fires in old apartments where building-related laws and regulations are not retroactively applied. As a result of analyzing the risk of installing fire doors in Improvement Scenario 2-4, assuming that fire doors are installed as basic scenario 1 in the existing situation where fire doors are not installed at the entrance of direct stairs. In basic scenario 1, the visible distance to the entrance of the direct staircase due to the spread of smoke was 260 seconds. Improvement scenarios 3 to 4 with fire doors installed open 300 seconds after the fire was recognized, and when the fire doors were installed at the entrance of the direct stairs, the visibility to the entrance of the statistics team was less than 600 seconds. In this case, the visibility was 600 seconds at the time of installation of the fire door, and scenarios 3 to 4 increased 56.6% compared to scenario 1, lowering the risk of evacuation by more than 50%. In order to eliminate the risk of non-installation of direct statistical groups that increase the risk of smoke spread, building-related laws such as the Fire Fighting Act shall be retroactively applied when installing a direct stairway entrance or balcony folding evacuation system. The improvement caused by the installation of fire doors has numerically proven the necessity of fire doors during evacuation, and the importance of maintaining fire doors can be grasped.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.247-256
• /
• 2012

Stable carbon isotope ratio of oil components are known to be unaffected by weathering processes and thus has been widely used to determine the origin of spilled oil. In this study, molecular index and composition of stable carbon isotope in 15 crude oils and petroleum product were analyzed and used as oil fingerprints to determine the discriminating power of each fingerprinting method among target crude oils. Through the fingerprints of alkane distribution only Bintulu and B-C(1%) were distinguishable from other crude oils. The pristane/phytane ratio can classify the crude oils into three groups but differentiation of crude oils within a group was impossible using the ratio. The crude oils of A.L., A.S.L., Foroozan and B-C(1%) were differentiated from the other oils using PAH source recognition indexes of C2D/C2P and C3D/C3P. The usage of 4-mD/1-mD and 2/3-mD/1-mD ratio was able to distinguish A.S.L., Bintulu and Oman from the other crude oils. However the PAH source recognition ratios in the other crude oils were similar and thus they were impractical to be used for source identification among the target crude oils. Stable carbon isotope ratios of alkanes were able to uniquely specify each crude oil in the plot of ${\delta}^{13}C_{C21}$ and ${\delta}^{13}C_{C25}$ except A.L., A.M., Qatar-Marine, B-C(1%). The oil fingerprinting method using stable carbon isotope ratios of individual alkane compounds showed more discriminating power among the target crude oils than the conventional source recognition indexes of PAHs or alkanes.

• Fire Science and Engineering
• /
• v.25 no.4
• /
• pp.89-93
• /
• 2011

It is not recommended that elevator use for egress at (super) high rise buildings because elevator shaft main roles to spread of fire smoke. But in North America used to protect this area by elevator shaft pressurization. These tests are performed at high rise apartment to verify that elevator shaft pressurization can protect to spread of fire smoke or not. and verify to used for egress at fire. Pressurization at elevator shaft make pressure difference of 50 Pa all floor at 150 CMM because this method have low friction loss from air flow. Also when dwelling door and elevator door are opened that critical velocity is performed to protect of back-layering from fire room for escape routs by 180 CMM. Therefore through out these pressurization tests by elevator shaft are estimated to have less overpressure because supply air difference are low between to satisfy critical velocity at one door opened and maintain to pressure difference all doors closed. Finally we verified that disable or residual people can use elevator for egress at fire by elevator shaft pressurization.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.3
• /
• pp.122-130
• /
• 2004

Crude oil is complex mixture of thousands of different organic compound formed from a variety of organic materials that are chemically converted under differing geological conditions over long periods of time. Also oil composition varies according to crude source, refining, processing, handling and storage. The oil fingerprint method is application of specific knowledge of petrochemicals and use of sophisticated analytical equipment and techniques to identify the source(s) of oil pollution. KNMPA currently utilizes three primary analytical techniques: Gas Chromatography (GC), Fluorescence Spectroscopy(FL) and Infrared Spectroscopy(IR). Of all these techniques, GC technique are most widely used. Gas Chromatography is used as a primary analytical method because high reliableness, high separating efficiency and repeatability, but it is timeconsumable. The study results of identification of waterborne spilled oil by Fast Gas Chromatograph method showed that analytical time is cut down to 30minutes in comparison with packed column method and chromatograms represent high resolution and high repeatability.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.200-204
• /
• 2011

수질오염총량관리제도 하에서 토지계 개별배출부하량 삭감을 위해 설치되는 비점오염저감시설의 저감효율은 삭감부하량 산정에 중요한 요소이다. 본 연구에서는 관련 문헌 및 환경부 모니터링 사업결과로부터 비점오염저감시설의 저감효율에 영향을 미치는 요소들을 살펴보았다. 모니터링 결과 중여과형 시설의 저감부하량에 대한 회귀분석을 실시한 결과 선행토양함수량보다 시설의 운영 및 유지관리 및 유역 특성을 포함하는 개별 시설의 특성에서 기인하는 영향이 컸다. 또한 BOD에 대한 회귀식의 결정계수는 높았으나 TN과 TP에 대한 결정계수는 낮았다. 비점오염저감시설의 저감효율을 안정적으로 얻기 위해서는 시설의 적절한 운영 및 유지관리가 중요하며, 향후 이를 평가할 수 있는 방안을 마련해야 할 것이다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10a
• /
• pp.107-109
• /
• 2000

고속 LAN과 같은 통신 장비의 발달로 클라이언트/서버 시스템 환경이 일반화됨에 따라 데이터베이스 시스템도 클라이언트/서버 환경을 지원하는 데이터 서버로서의 역할이 요구되었다. 또한, 다양하고 복잡한 형태의 제어 시스템들이 필요한 각 응용 분야에서 클라이언트/서버 시스템이 이용되고 있다. 이러한 상황에서 클라이언트들은 통신 비용 절감과 서버의 부하를 줄이기 위해 클라이언트의 버퍼에 데이터의 사본을 캐쉬(cache) 함으로써 클라이언트 시스템의 확장성 및 독립성을 추구한다. 하지만, 캐쉬한 데이터의 사본에 의해 갱신 연산이 수행되기 때문에 캐쉬 데이터의 일관성 유지를 위한 효율적인 방법들이 필요하다. 본 논문에서 제안한 기법은 클라이언트/서버 간의 데이터 전송이 페이지 단위로 행해지는 페이지-서버 환경에서 적용되는 회피-기반(avoidance-based) 기법으로써, 클라이언트가 데이터를 갱신할 때 갱신 의도를 비동기적으로 선언하는 캐위 일관성 유지 기법을 제안하였다. 그리고 제안한 기법과 최근에 제안된 기법들을 비교 분석하였다.

• Electronics and Telecommunications Trends
• /
• v.8 no.4
• /
• pp.13-22
• /
• 1993

이동통신 가입자는 통신망을 매우 많이 이용하면서 부단한 서비스를 요구하는 고객이므로 DCN은 고객에게 양질의 서비스를 제공할 수 있게 운용되어야 한다. 따라서 DCN 에서는 시스템 고장과 같은 이유로 통신망에 이상이 발생하지 말아야 하며, 만일 이상이 발생되었다 하더라도 신속한 복구가 이루어질 수 있도록 운용 체계가 구성되어야 한다. 본 고에서는 현재 개발되고 있는 DCN 에서 제어국을 구성하고 있는 한 서브시스템인 CCP 에서 수행되는 유지보수 기능과 이를 구현하는 과정을 보였다. 먼저 DCN 의 구조와 연관하여 제어국의 위치와 역할을 분석하고 제어국 내의 여러 서브 시스템의 기능을 살펴본 후 CCP 의 기능이 원활하게 수행될 수 있도록 CCP 의 유지 보수 기능은 어떻게 정의되어야 하는 가를 분석하고 이를 구현할 수 있는 설계 방향을 제시하였다.