• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.300-300
• /
• 2019

남북공유하천인 북한강 및 임진강 유역 남측에는 평화의 댐, 군남댐이 치수목적으로 건설되어 운영되고 있으나 북측의 기상 및 수문정보 획득이 불가하여 홍수대응에 불확실성이 높으며 공유하천상류 북측댐 방류패턴에 많은 영향을 받고 있다. 특히 접경지역 남측에 위치한 군남댐은 상류에 있는 황강댐에 비해 저수용량이 작고 우리나라 최북측 수위관측지점(필승교)에서 군남댐까지의 홍수도달시간은 1시간 이내로 예 경보 등 사전 대응에 한계가 있어 북측의 정보가 무엇보다 중요하다. 북측 강우상황 파악 및 위기대응 능력 강화를 위하여 실제 K-water는 기상청 관할 레이더(광덕산)를 활용한 접경지역 댐 유역 강우추정 및 홍수분석 체계를 구축하여 현업에 활용 중이나 실제 관측 강우량 대비 정량적인 차이를 보임에 따라 황강댐 방류 규모 및 군남댐 유입량 예측에 많은 한계가 있다. 따라서, 본 연구에서는 보다 정확한 임진강 상류 북측 강수량 추정을 위하여 기상청 관할 광덕산 레이더에서 얻어지는 군남댐 유역의 추정 강수량(Radar-AWS Rainrate; RAR)에 대하여 통계적 편의보정을 수행하였다. 본 연구에서 적용한 통계적 편의보정기법은 '확률분포형을 활용한 기법', '매개변수적 기법', '비매개변수적 기법' 등 크게 3가지로 구분할 수 있으며 세부적으로 총 11가지 기법을 적용하여 분석을 수행하였다. 분석결과, 일부 기법을 제외하고는 보정 전에 비해 정량적으로 레이더 강수량의 정확도가 향상된 것으로 나타났으며 특히 매개변수적 편의보정기법이 우수한 결과(결정계수: 0.9898)를 보였다. 비매개변수적 편의보정기법은 상대적으로 관측자료가 적어 과거기간에 발생하지 않은 이상치가 발생할 경우 비현실적인 강수로 편의보정되므로 충분한 자료가 축적된 이후 활용가능할 것으로 판단된다. 본 연구의 결과는 북한댐 수문 운영패턴 예측, 접경지역 홍수모의 및 홍수대응 등 치수적인 측면에서 활용도가 높을 것으로 판단된다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.189-196
• /
• 2012

The heavy moderator acts as the ultimate heat-sink in an operating CANDU reactor. HUKINS has been developed to investigate moderator flow patterns. HUKINS consists of a 38.4-mm-thick cylindrical shell with a 0.95 m inner diameter and 88 sus-tubes that produce a total heat of 10 kW. A chemical visualization method was selected to estimate the occurrence of typical moderator flow patterns. Momentum-dominated flow, mixed flow, and buoyancy-dominated flow are detected under conditions of a heat load of 7.7 kW and input mass flow rates of 4, 7, and 11 L/min. The experimental results are similar to the results of a CFD simulation that consisted of approximately 1.9 million grids and was conducted using the k-${\varepsilon}$ turbulence model. Therefore, both the present experiments and simulations using HUKINS, a 1/8-scale model, represent all three important flow patterns expected in the real CANDU6 reference reactor. Thus, it has been demonstrated that HUKINS could be useful in the study of CANDU6 moderator circulation.

• International Area Studies Review
• /
• v.21 no.4
• /
• pp.125-139
• /
• 2017

This study analyzes the determinants and patterns of regional migration in Myanmar. Population migration is affected by various factors such as economic and social factors as well as regional characteristics. It is affected by factors such as income, employment and social overhead capital. Therefore, this study attempts to analyze the following two research problems. First, I would like to analyze whether the reform and opening of Myanmar is causing the migration of rural to urban population. Myanmar is also trying to verify the pattern of population migration experienced by other developing countries. Second, we analyze the impact of social overhead capital on population migration in Myanmar. We analyze the impact of basic infrastructure such as roads, electricity and water on population movements. This will give implications for investment policy decision of social overhead capital for balanced regional development. First, the pattern of population migration in Myanmar is shifting from rural to urban areas, as other developing countries have experienced. Myanmar's urban areas of Yangon and Mandalay have been analyzed as having migration. Second, the expansion of social overhead capital was found to have an impact. Social overhead capital such as roads and educational environments were analyzed to have the capacity to inhale the population. Especially, the educational environment of the region has a great effect on population migration. It is analyzed that education reform is an important policy issue for the balanced regional development of Myanmar. Fourth, employment opportunities were analyzed to have the greatest impact on Myanmar population movements. In the early stage of economic development, it is analyzed that the population moves to a region where employment opportunity is high in the situation where foreign capital is coming in. It is analyzed that the direction of inflow of foreign capital and the imbalance of development in the region will be determined in the situation where the economic development is carried out through foreign capital.

• The Journal of Information Technology
• /
• v.1 no.2
• /
• pp.181-193
• /
• 1998

The measure of public information flow developed here is the number of order frequency. In the first part of the analysis, I document the general pattern of public information, with an emphasis on the intraday arrival of information. Overall, I find that public information arrival is nonconstant Consistent with earlier studies, I find that information arrival exhibits an inverted U-shape pattern across intraday trading. Over the average trading day, the flow of public information increases throughout the morning hours and then falls over the period, between 3:00 P.M. and 3:05. The second part of my analysis focuse is the relation between the public information variable and measure of intraday order frequency, specifically insignificant effect. According to time flow in the intraday trading, although the number of insignificant effect is increasing moderately, the result is remarkable in light of the aggreate nature of the public information and order frequency variable employed. The foreigner's investor group changes homogenously.

• Communications for Statistical Applications and Methods
• /
• v.17 no.1
• /
• pp.39-45
• /
• 2010

As the value of environment is increasing, the water quality has been a matter of interest to the nation and people. Research on water quality has been widely studied, but focused on geographical characteristic and river characteristics like inflow, outflow, quantity and speed of water. In this paper, two approaches to measure the similarity of sampling sites by using water quality data are discussed and compared with two-years empirical data of Yongdam-Dam. The existing method has calculated their similarities with principal component scores. The proposed approach in this paper use correlation matrix of water quality related variables and MDS for measuring the similarity, which is shown to be better in the sense of being clustering which is identical to geographical clustering since it can consider the time series pattern of water quality.

• Solar Energy
• /
• v.17 no.3
• /
• pp.35-41
• /
• 1997

An experimental study was carried out in a vertical channel with square heat source by visualization equipment with laser apparatus. The image processing system consists of one commercial image board slit into a personal computer and 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system which adopted two-frame grey-level cross correlation algorithm. Heat source was uniform heat flux(5W). The obtained results show various flow patterns such as the kinetic energy distribution and the turbulent kinetic energy distribution.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05b
• /
• pp.15-18
• /
• 2004

피뢰기에 뇌 또는 이상전압과 같은 정격이상의 고장전류가 유입되어 발생하게 되는 순간적인 열 충격과 내부압력 상승은 폭탄이 내부에서 터지는 것과 같은 엄청난 양의 충격에너지이다. 본 연구에 있어서 폴리머 피뢰기의 제조에 사용된 모듈용 브레이드 복합재료는 압력해소 및 폭발 비산하지 않도록 하는 기능을 수행하도록 설계되어있다. 기존의 폴리머 피뢰기에 적용된 복합재료보다 충격에너지를 흡수하는 구조물에 유리한 브레이드 복합재료를 피뢰기 모듈의 제조에 도입한 것은 매우 의미 있는 일이라 판단된다. 따라서 본 연구에서는 열경화성 브레이드 복합재료를 제조하기 위하여 프리폼을 먼저 제작한 다음 금형에 삽입한 후 진공상태에서 수지를 주입하여 경화시키는 RTM공법을 이용하였다. 본 연구의 목적은 브레이드 패턴 및 방압개소 설계 등의 기초적인 자료조사 및 실험을 통하여 폴리머 피뢰기의 폭발 비산을 방지할 수 있는 압력해소 성능을 위한 기초 자료를 확보하고자 하는 것이다. 브레이드 복합재료의 기본적인 경화거동을 등온 및 동적 DSC를 이용하여 고찰하였고, 기본적인 전기적 특성을 평가하였으며, 방압개소를 가진 폴리머 피뢰기 모듈의 고장전류시험시 예상되는 열 충격에 대한 성능을 검증하기 위하여 열팽창계수를 측정하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.638-644
• /
• 2019

In this study, the fluid flow and heat transfer characteristics within sandwich panels are investigated using computational fluid dynamics. Within the sandwich panels having periodic cellular cores, air can freely move inside the core section so that the structure is able to perform multi-functional roles such as simultaneous load bearing and heat dissipation. Thus, there needs to examine the thermal and flow analysis with respect to design variables and various conditions. In this regard, ANSYS Fluent was utilized to explore the flow and heat transfer within the pyramidal truss sandwich structures by varying the truss angle and inlet velocity. Without the entry effect in the first unitcell, the constant rate of pressure and the constant rate of Nusselt number was observed. As a result, it was demonstrated that Nusselt number increases and friction factor decreases as the inlet velocity increases. Moreover, the rate of Nusselt number and friction factor was appreciable in the range of V=1-5m/s due to the transition from laminar to turbulent flow. Regarding the effect of design variable, the variation of truss angle did not significantly influence the characteristics.

• Land and Housing Review
• /
• v.14 no.3
• /
• pp.93-106
• /
• 2023

This study attempted to simulate changes in the thermal environment according to the type of apartment complex in Korea using CFD techniques and evaluate the thermal environment by type of apartment. First, apartment complex types in the 2000s and 2010s were referred from previous studies and four types of apartment complex were extracted from. Second, the layout of the apartment complex and temperature changes were analyzed by the direction of wind inflow. Third, a standardized model was created from each type using tower type, plate type, and mixed driving. Last, CFD simulations were performed by setting up the inflow of wind from a total of eight directions. The temperature was relatively low in the type consisting of only the tower type and the type of placing the tower type in the center of the complex, regardless of the direction of the wind. It was due to the good inflow of wind from these types to the inside of the complex. It can be interpreted because wind flows easily into the complex in these types. The findings showed that wind flow and resulting temperature distribution patterns differed depending on the building type and complex layout type, confirming the need for careful consideration of the complex layout in the early design stage. The results are expected to be used as basic data for creating a sustainable residential environment in the early design stage of apartment complexes in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1976-1985
• /
• 2015

The amount of packets in palyout buffer of video streaming receiver can be changed by network condition, and saturated and exhausted by the delay and jitter. Especially, if the amount of incoming video traffic exceeds the maximum allowed playout buffer, buffer overflow problem can be generated. It makes the deterioration of video image and the discontinuity of playout by skip phenomenon. Also, if the incoming packets are delayed by network confusion, the stop phenomenon of video image is made by buffering due to buffer underflow problem. To solve these problems, this paper proposes the video streaming receiver with token bucket scheme which automatically establishes the important parameters like token generation rate r and bucket maximum capacity c adapting to the pattern of video packets. The simulation results using network simulator-2 (NS-2) and joint scalable video model (JSVM) show that the proposed token bucket scheme with automatic establishment parameter provides better performance than the existing token bucket scheme with manual establishment parameter in terms of the generation number of overflow and underflow, packer loss rate, and peak signal to noise ratio (PSNR) in three test video sequences.