• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.68-75
• /
• 2000

The flexibility of a manipulator inevitably yields vibration at the end effector. In this work, position and vibration control for a flexible robot arm was studied using a separate voice coil type actuator to raise the accuracy and speed of end tip. A flexible robot arm with a tip mass is modeled as an Euler-Bernoulli beam. An $H_$\infty$$ controller is adapted to get a robust control against unmodeled higher-order mode vibration, output sensor noise, and etc. Simulations and experiments show that the modeling of the system is acceptable and robust vibration control is also achieved.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2498-2500
• /
• 2005

본 논문에서는 복잡한 비선형 동력학 시스템에서의 신뢰성 있고, 융통성 있는 동작을 위한 디지털제어기의 퍼지 모델 기반 설계 도구를 제안하고, 연속시간 비선형 시스템을 위해 퍼지 모델 기반 제어기의 지능형 디지털 재설계를 위한 방법을 제안한다. 이를 위해, 연속시간 시스템에 대해 연속시간 TS 퍼지 모델이 구성되고, 그 다음 연속시간 퍼지 모델 기반 제어기는 등가의 이산시간 퍼지 모델 기반 제어기로 변환된다. 마지막으로 단일링크 유연로봇 시스템의 디지털 제어에 제안된 방법을 적용해 그 효용성을 입증한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.7 s.178
• /
• pp.1689-1696
• /
• 2000

This paper proposes a new adaptive control scheme for flexible-link robots. A model-based nonlinear control scheme is designed based on a V-shape Lyapunov function, and then the nonlinear control i s extended to a model-based adaptive control to cope with parametric uncertainties in the dynamic model. The proposed control guarantees the global exponential or global asymptotic stability of the overall control system with all internal signals bounded. The effectiveness of the proposed control is shown by computer simulation.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.6
• /
• pp.62-70
• /
• 2008

An adaptive fuzzy backstepping controller is proposed for the motion control for a single-link flexible-joint robot in the presence of parametric uncertainties. Fuzzy logic system is used to approximate the uncertainties of functions and a backstepping technique is employed to deal with the mismatched problem. A compensation controller is also employed to estimates the bound of approximation error so that the shattering effect of the control effort can be reduced. Thus the asymptotic stability of the closed loop control system can be obtained based on a Lyapunov synthesis approach. Numerical simulation results for a single-link flexible-joint robot are included to show the effectiveness of proposed controller.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.2
• /
• pp.160-168
• /
• 1997

A $H_{\infty}$self-tuning control scheme for the tip position of a flexible link robot handling unknown loads is presented here. The scheme essentially comprises a recursive least-squares identification algorithm and $H_{\infty}$self-tunning controller. The $H_{\infty}$control low is designed to be robust to uncertain parameters and the self-tunning action provides adaption to unknown parameters. Through numerical study, the performance comparison of the $H_{\infty}$self-tuning controller with a constant gain $H_{\infty}$controller as well as a LQG self-tuning controller clearly shows its superior ability in handling load changes in quiescent states.nt states.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.250-252
• /
• 2004

서비스 로봇은 일상생활에서 사람들의 업무를 보조한다. 이때, 효과적인 서비스를 위해서는 사람과 로봇 사이의 상호작용이 매우 중요하다 대화는 사람과 로봇이 보다 유연하고 풍부한 의사전달을 하는데 도움을 준다. 전통적인 로봇 연구에서는 명령과 같은 간단한 질의 둥을 처리하는 것이 의사소통의 전부였으나, 실제 사람들 사이의 대화에서는 배경 지식이나 대화의 문맥 둥에 의해 중요한 정보가 대화에서 생략되기도 한다. 이런 상황은 여러 불확실성을 포함하게 되는데 대화의 문맥이나 불확실성을 다루는 것이 필요하다. 본 논문에서는 '상호-주도' 방식을 통해 사람이 쓰는 일상 대화를 계층적 베이지안 네트워크를 이용하여 처리하는 방법을 제안한다. 실제 로봇의 시뮬레이션 환경은 제안하는 방법의 유용함을 보여주었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.357-358
• /
• 2013

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.333-334
• /
• 2013

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.201-202
• /
• 2010

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.390-390
• /
• 2000

This research is the development of a skin-type tactile sensor for service robot using PVDF film for the detection of the contact state. The Prototype of the tactile sensor which has 8$\times$8 taxels was fabricated using PVDF film In the fabrication procedure of the sensor, the electrode patterns and common electrode of the thin conductive tape were attached to the both side of the 28 micro meter thickness PVDF film using conductive adhesive. The sensor was covered with polyester film for insulation and attached to the rubber base for making stable structure. The signals of a contact pressure to the tactile sensor were sensed and processed in the DSP system in which the signals were digitized and filtered. Finally, the signals were integrated for taking the force profile. The processed signals of the output of the sensor were visualized in PC, the shape and force distribution of the contact object were obtained. The reasonable performance for the detection of contact state was verified through the experiment.