• 대한한의학원전학회지
• /
• 제19권4호
• /
• pp.226-240
• /
• 2006

1899년재상대후기적왕궁유지안양소둔발현료갑골문(年在商代後期的王宮유址安陽小屯發現了甲骨文). 갑골문시목전능근거적최가고적고대자료(甲骨文是目前能根據的最可고的古代資料). 십오만다편적갑골문중유흔다유관질병적내용(十五萬多片的甲骨文中有흔多有關疾病的內容). 근거갑골문가고찰질병적원인(根據甲骨文可考察疾病的原因), 질병적치료(疾病的治療), 질병적종류(疾病的種類). 갑골문적질병복사중가이관찰도수(甲骨文的疾病卜辭中可以觀察到首),목(目),이(耳),설(舌),치(齒),골등삼십다종질병(骨等三十多種疾病). 근현대인적질병종류상차불다(근現代人的疾病種類相差不多). 질병적치료자시의관(疾病的治療者是醫官), 궁명규소질신(宮名叫小疾臣). 재래무야시실제상적의관료(再來巫也是實際上的醫官了), 인병료무통과무술래치병(人病了巫通過巫術來治病). 상대시중국오천년역사상최미신적시대(商代是中國五千年歷史上最迷信的時代), 일체사정도향상제혹시조선점복(一切事情都向上帝或是祖先占卜), 안점복적결과래행동(按占卜的結果來行動). 생병적시후야시일양(生病的時候也是一樣), 단시만만지도(但是慢慢知道), 점복불시치병적호판법(占卜不是治病的好辦法), 소이도상대후기질병복사점점소료(所以到商代後期疾病卜辭漸漸小了). 재갑골문질병복사중적병인유상왕(在甲骨文疾病卜辭中的病人有商王), 왕비(王妃), 왕자(往者), 왕신(王臣), 기중대다수시유관상왕적질병적정황(基中大多數是有關商王的疾病的精況). 치료방법수선유약래치병(治療方法首先有藥來治病); 제이침래치료(第二鍼來治療); 제삼애구래치료(第三艾灸來治療);제사안마래치료(第四按摩來治療), 제오아과중유발치치료(第五牙科中有拔齒治療); 제육유접골적치료(第六有接骨的治療). 유갑골문중적질병복사가간출상대적질병종류(由甲骨文中的疾病卜사可看出商代的疾病種類), 치료방법(治療方法), 가이설상대적의학수평상당고(可以設商代的醫學水平相唐高), 저양적능력능구공고전국시대적의술(這樣的能力能구鞏固戰國時代的醫術), 작료한대능사출(作了漢代能寫出)"신농본초경(神農本草經)", "황제내경(黃帝內徑)"등명저적기초(燈明抵敵基礎), 동시장중국적중의학적시원추도상대적학절적근거(同時將中國的中醫學的始源推到商代的학切的根据).

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.487-491
• /
• 2014

In this study, we measured the thermally and chemically induced residual stresses on glaze using the photoelastic method. Porcelain with thermally induced residual stress showed compressive stress of 49 MPa for thermal expansion mismatch and a locally fluctuated stress field over the glaze layer due to compensation of compressive stresses around pores. In the case of chemically strengthened porcelain, the compressive stress on the glaze was 151 MPa which was around 3 times higher than the stress on thermally strengthened glaze. The trend of fracture strength of thermally and chemically strengthened porcelains was coincident with that of the residual stress of porcelains.

• 대한수의학회지
• /
• 제8권1호
• /
• pp.11-17
• /
• 1968

가축(家畜)의 선충류에 구충효력이 우수(優秀)하다는 Tetramisole을 이용(使用)하여 폐충인공감염돈에 5, 7, 5, 10, 및 12.5mg/kg을 사료(飼料) 혼여(混與) 및 피하주사(皮下注射)로서 구충효력을 검토(檢討)한 결과(結果) 다음과 같은 성적(成績)을 얻었다. 1. 투약별(投藥別)로 보면 10~12.5mg/kg이 가장 우수(優秀)하였다. 2. 투약별(投藥別)로 보면 사료혼여(飼料混與)가 피하주사법(皮下注射法)보다 우수(優秀)하였고 부작용(副作用)도 적었다. 3. 감염후(感梁後) 4내지 15일(日)째의 유약충에도 구충효과가 있었다. 4. 주요부작용(主要副作用)은 기침, 구토(嘔吐), 흥구(興舊), 호흡수증가등(呼吸數增加等)이었으나 일과성(一過性)으로 곧 소실(消失)되었고 투약(投藥)을 5~12.5mg/kg 범위내(範圍內)에서는 투약량(投藥量)이 따른 부작용(副作用)의 차이(差異)는 인정(認定)되지 않았다.

• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.160-168
• /
• 1998

치환에 의한 wagnerite의 색상변화 및 고용체 형성한계를 살펴보기 위해 wagnerite ($A_2XO_4Z$)를 합성한후 각 구성원소들을 치환하였다. Ca-wagnerite의 Ca 대신에 Mg, Co, Ni, Cu로 치환하여 용해도가 한정된 고용체를 얻었다. 이들 중 (Mg,Ca)-wagnerite와 (Co,Ca)-wagnerite의 경우에만 단일상의 wagnerite를 합성하였으며 이들의 색상은 각각 백색과 자주색이었다. 그 외의 조성 및 (Ni,Ca)-wagnerite와 (Cu,Ca)-wagnerite의 경우에는 여러상이 혼재해 있는 것으로 나타났다. $A^{5+}$자리에 Li을 치환해 보았으며 또한 $X^{5+}$대신 V을 치환하여 진한 자주 및 금색, 옅은 노란색의 wagnerite를 합성하였으며, Z- 대신 Cl을 치환한 경우 단일상의 wagnerite을 얻지 못하였다.

• 한국세라믹학회지
• /
• 제45권5호
• /
• pp.256-262
• /
• 2008

$ZnAl_{1-x}\;Cr_xO_4$ solid solutions were synthesized as pink pigments with and without mineralizer. The pigments were examined to optimize color development conditions of temperature and $Cr_2O_3$ contents. The characteristics of synthesized pigments were analyzed by XRD, XPS, FT-IR and UV-vis spectrophotometer. While samples without mineralizer fired at $1300^{\circ}C$, showed $ZnAl_2O_4$ and $ZnCr_2O_4$ spinel in XRD analysis. While samples with mineralizer resulted in $ZnAl_2O_4$. As a results, the pigments show pink color and most effective pink color was obtained at X=0.15 and $1250^{\circ}C$ when mineralizer was used. The chromatic coordinates are $L^*$ 58.61 $a^*$ 24.48, and $b^*$ 9.60.

• 한국세라믹학회지
• /
• 제51권3호
• /
• pp.150-155
• /
• 2014

In aprevious study, the mutual interaction between $Fe_2O_3$ and $TiO_2$ was found to influence the color of celadon glaze. Celadon samples were prepared with varying concentrations of $TiO_2$ at a fixed level of $Fe_2O_3$. The electronic states of Fe and Ti were analyzed by M$\ddot{o}$ssbauer spectroscopy and electron spin-resonance spectroscopy, respectively. These results were examined with the celadon colors measured according to CIELAB values. This study revealed that an increase of $Ti^{3+}$ in the glassy phase decreased the $Fe^{2+}/Fe^{3+}$ ratio, resulting in a color change of the celadon samples in the GY and Y groups. The maximum reflectance wavelength was shifted from 505 nm to 610 nm with an increase in the $TiO_2$ concentration.

• 한국재료학회지
• /
• 제9권2호
• /
• pp.181-187
• /
• 1999

In this study, the effect of residual stress on mechanical strength was investigated with 1 kind of whiteware body and 4 kinds of glazes which are produced in succeeding ceramic art place. Using dipping method, the body was coated for different times in order to manipulate the coating thickness and sintered in the different temperatures ($1200^{\circ}C$, $1250^{\circ}C$, $1300^{\circ}C$, $1350^{\circ}C$) for two thus hours. The sintered bodies were characterized by XRD, EPMA, FEM and UTM in order to study the forming of reaction layer between body and glazes, residual stresses and the effects of residual stresses on mechanical strength of pottery. At $1300{\circ}C$, we obtained maximum density and mechanical strength. By the finite element method, the residual stresses in surface of body were minimum in specific thickness of glazes and the mechanical strength of body in that thickness of glazes showed maximum when the firing temperature was settled.

• 한국분말재료학회지
• /
• 제27권5호
• /
• pp.388-393
• /
• 2020

The enamel powders used traditionally in Korea are produced by a ball-milling process. Because of their irregular shapes, enamel powders exhibit poor flowability. Therefore, polygonal enamel powders are only used for handmade cloisonné crafts. In order to industrialize or automate the process of cloisonné crafts, it is essential to control the size and shape of the powder. In this study, the flowability of the enamel powders was improved using the spheroidization process, which employs the RF plasma treatment. In addition, a simple grid structure and logo were successfully produced using the additive manufacturing process (powder bed fusion), which utilizes spherical enamel powders. The additive manufacturing technology of spherical enamel powders is expected to be widely used in the field of cloisonné crafting in the future.

• 한국재료학회지
• /
• 제23권7호
• /
• pp.399-403
• /
• 2013

The purpose of this study is to investigate the coloration characteristics by identifying the factor affecting red coloration of copper red glaze in traditional Korean ceramics. This study analyzed the characteristics of the reduction-fired copper red glaze by using XRD, Raman spectroscopy, EDX and UV-vis spectroscopy. As a result of XRD analysis, the glaze completely melted and amorphous glass appeared overall, and the characteristic peak of metal Cu was shown together. In addition, as a result of Raman analysis, the characteristic bands of CuO and $Cu_2O$ were shown together. The distribution of component elements was observed by EDX. As a result, copper(Cu) were distributed throughout the glaze. Thus, it was shown that copper red glaze appeared the best red coloration because metal Cu, CuO and $Cu_2O$ evenly existed throughout glaze in particle colloidal state. The chroma value of the copper red glaze was CIE $L^*$ 30.07, $a^*$ 13.65, $b^*$ 3.72. Wine-Red Solution was shown by Dark Graish Red coloration.

• 한국세라믹학회지
• /
• 제20권4호
• /
• pp.333-339
• /
• 1983

Semiconducting glaxe of iron system for the recent use as high Voltage porcelain insulators often showed the tendancy of unstable thermal properties. Thus the development of frit including magnetite was studied to cover the defect. In the experimental process melted and quenched frits were ground pelletized and heat-treated at various temperatures in the range of 800-1 $300^{\circ}C$ for various soaking time within 4 hours and then crystallized specimens were obtained. The speciment were studied with optical and electron microscope DTA x-ray diffractometer and electrometer The results obtained were as follows : 1) The optimum condition for the crystal growth of magnetite in the frite was the heat-treatment of $1300^{\circ}C$ for 3hrs and in this case the range of crystal size was $10-11\mu\textrm{m}$ 2) The activation energy for the crystal growth of magnetite was 21.1 kcal/mole. 3) The heat-treament at $1, 250^{\circ}C$ and $1, 300^{\circ}C$ resulted in the good thermal stability and the range of surface resistivity was $3.5{\times}10^4-4.0{\times}10^7$, /TEX> $\Omega$/$cm^2$ which was adguate to semiconducting frit. 4) The conduction mechanism seems to be due to the electron mobility rather than ion mobility and the activa-tion energy for the conduction was 0.07-0.15eV/mole for the heat-treated specimes in the range of 1, 250-1, 300C