• 대한기계학회논문집A
• /
• 제35권2호
• /
• pp.207-212
• /
• 2011

유압 브레이커는 굴착기의 암 끝에 장착되어 파쇄작업을 하는 부착작업기이다. 그러나 굴착기의 성능에 치명적인 영향을 미치는 유압 브레이커의 중량에 대한 연구는 아직 없었다. 따라서 본 연구에서는 유압 브레이커에서 대부분의 중량을 차지하고 있는 하우징에 대한 최적설계를 수행하였다. 유압 브레이커 하우징의 설계 요구사항은 정상 운전상태에서 파손없이 중량을 최소화하는 것이다. 직교배열표를 이용하여 실험점을 선정하였고, 실험점에서의 결과를 바탕으로 근사모델을 생성하여 최적 설계안을 도출하였다. 그 결과, 모든 구속조건을 만족하면서 유압 브레이커 하우징의 중량을 4.8% 감소시켰다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.683-686
• /
• 2007

The characteristics of radiated noise from the hydraulic breaker were measured under the revised regulation of Ministry of environment. The directivity of radiated noise was also measured at a distance of 7.5 m and a height of 1.5 m from the operating hydraulic breaker.

• 유공압시스템학회논문집
• /
• 제5권3호
• /
• pp.1-8
• /
• 2008

The optimal design of a large-size fully hydraulic breaker is studied in this paper. Mathematical modeling of the breaker is established and verified by experiments. Through sensitivity analysis, the key design parameters of the breaker are selected, which mostly affect the performance of the breaker. Taguchi method is used to optimize the key design parameters in order to maximize the output power through simulation using AMESim. As a result, the impact energy is increased by 18.9% and the output power is increased by 12.4% compared with the current design. The pressure pulsation in the supply line is also reduced by the optimization.

• 유공압시스템학회논문집
• /
• 제7권1호
• /
• pp.11-19
• /
• 2010

A gas-assisted hydraulic breaker uses both hydraulic and pneumatic energies and the appropriate balance between them mostly effects its performance. Mathematical modeling of the breaker is established and verified by experiment. Through sensitivity analysis using AMESim, the key design parameters are selected, which mostly affect the performance of the breaker. Taguchi method is used to optimize the key design parameters to maximize the output power for long and short strokes through simulation. As the result, the output power as well as the impact energy are increased significantly compared with the existing design. The pressure pulsation in the supply line is reduced to a tolerable level and the dynamic characteristics of the piston displacement is also improved by the optimization.

• 유공압시스템학회논문집
• /
• 제6권1호
• /
• pp.17-24
• /
• 2009

The performance improvement of a small-size integrated-type fully hydraulic breaker is studied in this paper. Mathematical modeling of the breaker is established and verified by experiment. Through sensitivity analysis using AMESim, the key design parameters are selected and nearly optimized to maximize the impact energy as well as to improve the dynamic characteristics such as the piston upper chamber pressure, piston and valve displacements. As a result, the impact energy, blows per minute(bpm) and output power are increased by 52.9%, 1%, and 55.6%, respectively compared with the current design. The dynamic characteristics of the piston upper chamber pressure, piston and valve displacements are also improved by the design change.

• 연구논문집
• /
• 통권32호
• /
• pp.45-53
• /
• 2002

Hydraulic breaker attached excavator generally used for the destroying and disassembling of buildings, crashing road pavement, breaking rocks at quarry and etc. The developed breaker are determined their own destructive force and number of impact by the input hydraulic flow rate and pressure than the operating conditions, In this study, the characteristics of pressure variation in closed vessel is invested for testing the impact energy of hydraulic breaker. To test the impact energy, the test system is designed as a mechanism consisted with a hydraulic cylinder, main base, pressure sensor, LVDT, data acquisition system and etc.. The developed test system is applied to measure the impact energy for hydraulic breaker. The proposed testing method could be applied for conventional impact test and the control system evaluation for hydraulic breakers.

• 대한기계학회논문집A
• /
• 제39권12호
• /
• pp.1207-1212
• /
• 2015

진동리퍼는 암반의 파쇄와 리핑 작업을 동시에 하기 위해서 개발된 장비이며 기존의 암반 파쇄용 유압 브레이커와 작동 원리가 다르다 진동리퍼의 기진력을 투스로 전달하는 기어박스-생크 용접부는 매우 중요한 부분이며 진동리퍼의 기계적 건전성의 예측이 필수적이다. 본 연구는 생크소재 및 용접재료의 변화에 따른 접부의 피로수명 예측을 목적으로 하고 있다. 생크의 재료는 Hadox-hituf, AR 400을 사용하였고 접금속은 CSF-71T, CSF-81T를 사용하였다. 피로시험은 응력비 R=0에서 각 재료조건에 대해서 수행하였다. P-S-N 선도는 JSME-S002 규정에 맞춰 파괴확률 10%, 50%, 90%에 대해서 나타냈으며 수명 예측 식을 도출하였다.