• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.1
• /
• pp.25-35
• /
• 2010

The periodic application effects of two different herbicides on soil physical properties were observed in a slightly hilly orchard of pear tree located on the southestern flank of the Palbong Mountain in Gongju Chungnam : (1) bare surface vegetation; (2) glyphosate-treated plot; (3) paraquat-treated plot. The slope of experimental plots ranged from 5.5%to 10.2%at an altitude of 125 mand 896 $m^2$ ($28m{\times}32m$) in area. The total respective rainfall events were 47, 52, 52 times during experimental period from 2006 to 2008, while approximately 65 percent of daily rainfall intensity from2006 to 2008 was less than 20 mm a day. The organic matter contents on the surface 15 cm soil ranging from1.23%to 1.84%in 2006 were changed into from1.35 %to 2.28%in 2008 in the order of control > glyphosate > paraquat > bare plot in 2008, indicating that the herbicide treatment influenced the accumulation organic matter in soil. The changes in soil particle contents showed that the loss of soil particles in top 5 cm soil depth was greater in a bare soil than in other treatments such as control, glyphosate, and paraquat-treated plot. The net changes in the bulk densities showed that there were little variations between May of 2006 and Nov. of 2008 even though there were some losses of the soil particles. The soil strength of the glyphosate-treated bare plots was much greater than those of other plots such as control, glyphosate, and paraquat plots. However the soil strengths in control plots were lower than those in the plots of glyphosate and paraquat treated ones.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.7
• /
• pp.627-633
• /
• 2011

Performance of a hydrogen generator for a fuel cell unmanned aircraft was evaluated as the change of temperature environment. Sodium borohydride ($NaBH_4$) was used as a hydrogen source due to its high hydrogen content and good storability. The hydrogen gas was generated by the hydrolysis reaction using a catalytic reactor. Reaction chambers were set up with the range of temperatures from -20 to $60^{\circ}C$. The hydrogen generation rate and temperatures changes of reactor and separator were measured at the $NaBH_4$ concentrations of 20 and 25wt.%. As a result, the hydrogen generation rate was decreased as the repeated reaction cycles. It showed that the hydrogen generation rate was stable at low temperature, while at high temperature the hydrogen generation rate was rapidly decreased. The performance degradation was mainly caused by the catalyst loss and $NaBO_2$ deposition on the catalyst surface.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.1
• /
• pp.36-42
• /
• 2002

This study was conducted to estimate the number of lost or abandoned plastic sea-eel pots and investigate the actual condition on the ghost fishing happened from the pots during the period of August 1996 and January 2002 In the Southern Sea of Korea. The average number of lost or abandoned sea-eel pots in the investigated sea area were 34 ea/$\textrm{km}^2$ and was the lowest as 5 ea/$\textrm{km}^2$ Sea Area code # 113 and was the highest as 94 ea/$\textrm{km}^2$ in the Sea Area code #106. Pots number in accordance with water depth was the highest as 89 ea/$\textrm{km}^2$ on the level of 61 ~70m and there was no collection for the sea-eel pot over 130m water depth. The average catch rate of ghost fishing happened from the lost or abandoned pots was 8.1% and the highest rate was 25% in the Sea Area code #224 and there were no catches in the Sea Area code # 92, 110, 243 and 253. The number of lost or abandoned sea-eel pots continued ghost fishing were estimated as 14.2 ea/$\textrm{km}^2$ in the Sea Area code # 99 and was the highest. Catch rate of ghost fishing according to water depth was the highest as 23.5% on the level of 71~80 m, and the number of lost or abandoned sea-eel pots continued ghost fishing were estimated as 12.7 ea/$\textrm{km}^2$ on the level of 81~90m and was the highest. Length distribution of sea-eel which were caught from ghost fishing was 25.5~66.0$\textrm{cm}^2$

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.1
• /
• pp.37-43
• /
• 2012

Radioactive waste transport package was developed to transport eight drums of low and intermediate level waste(LILW) in accordance with the IAEA and domestic related regulations. The package is classified with industrial package IP-2. IP-2 package is required to undergo a free drop test and a stacking test. After free drop and stacking tests, it should prevent the loss or dispersal of radioactive contents, and loss of shielding integrity which would result in more than 20 % increase in the radiation level at any external surface of the package. The objective of this study is to establish the safety test method and procedure for stacking test and to prove the structural integrities of the IP-2 package. Stacking test and analysis were performed with a compressive load equal to five times the weight of the package for a period of 24 hours using a full scale model. Strains and displacements were measured at the corner fitting of the package during the stacking test. The measured strains and displacements were compared with the analysis results, and there were good agreements. It is very difficult to measure the deflection at the container base, so the maximum deflection of the container base was calculated by the analysis method. The maximum displacement at the corner fitting and deflection at the container base were less than their allowable values. Dimensions of the test model, thickness of shielding material and bolt torque were measured before and after the stacking test. Throughout the stacking test, it was found that there were no loss or dispersal of radioactive contents and no loss of shielding integrity. Thus, the package was shown to comply with the requirements to maintain structural integrity under the stacking condition.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.8
• /
• pp.730-740
• /
• 2000

The software rejuvenation method for highly available multiplex systems uses a pro-active fault-tolerant approach to handle system failures. The software rejuvenation prevents failures from occurring, while the previous methods recover from failures after happening. Especially, since the software aging proceeds fast in the software used for the multimedia mobile computing due to the loss of communications or data, the preventive method from failures using software rejuvenation can be used for the multimedia mobile computing. In this paper, according to the operational parameters such as rejuvenation period, rejuvenation time, failure rate and repair rate of the servers, number of running servers, duration of running time, and type of running modes, we calculate steady-state probabilities, downtime, availability, and cost of the multiplex systems using software rejuvenation method. We validate the closed-form solutions of the mathematical model by experiments based on various operational parameters and find that the software rejuvenation method can be adopted as preventive fault-tolerant technique. The failure rate and unstable rate of the servers are essential factors for the decision making of the rejuvenation policies.

• Asian Journal of Turfgrass Science
• /
• v.10 no.4
• /
• pp.305-313
• /
• 1996

This study was carried out to investigate the removal rates of Cd and Pb of the litters in the Phragmites communis. Miscanthus sacchariflorus, Typha angustata, Scirpus tabernaemontani grassland aquatic ecosystem in the lake Paldangho. The annual production of Cd and Pb were 0.005g /$m^2$ , 0.21g /$m^2$in P. commumis, 0.004g /$m^2$, O.08g /$m^2$ in M. sacchariflorus, 0.023g /$m^2$, 0.42g /$m^2$ in T. angustata and 0.020g /$m^2$, 0.23g /$m^2$ in S. tabernaemontani respectively. The removal rates of Cd and Pb of the litters were 0.83, 0.85 in P. communis. 0.36, 0.54 in M. sacchariflorus, 0.61, 0.51 in T. angustata and 0.76, 0.71 in S. tabernaemontani, respectively. The times required to decay 50, 95, 99 percent of the steady state level and turnover values of cadmium on the grassland floor were 0.83, 3,60, 6.00 years in P. communis. 1.90, 8.24, 13.74 years in M.sacchariflorus, 1.15, 4.96, 8.27 years in T. angustata and 0.91, 3.95, 6.58 years in S. tabernaemontani The times required to decay 50, 95, 99 percent of the steady state level and turnover values of lead on the grassland floor were 0.81, 3.51, 5.86 years in P. communis. 1.28, 5.56, 9.26 years in M. sacchariflorus, 1.37, 5.94, 9.90 years in T. angustata and 0.97, 4.21, 7.02 years in S. tabernaemontani. Key words: Removal rate, Accumulation, Paldangho, Cadmium, Lead, Phragmites communis Miseanthus sacchariflorus, Typha angustata, Scirpus tabernaemontani.

• Asian Journal of Turfgrass Science
• /
• v.10 no.4
• /
• pp.285-295
• /
• 1996

This investigation was carried out to reveal the removal rates of Ca, Mg and Na among the constituents of the litters in Phragmites communis Miscanthus sacchariflorus, Typha augustata and Scirpus tabernaemontani ecosystems in the lake Paldangho. The removal constants of Ca, Mg and Na were determined by the mathematical model and the time required to decay to any percentage of each constituent was calculated by using this model. The results obtained in this study can he abstracted as follows; The removal constants of Ca, Mg and Na of the litters were 0.91, 0.86 and 0.71 in Phragmites communis, 0.64, 0.62, and 0.50 in Miscanthus sacchariflorus, 0.66, 0.28, and 0.56 in Typha angustata and 0.40, 0.55 and 0.63 in Scirpus tabernaemontani, respectively. These values of each constituent in Phragmites communis are the highest among the compared species and in each species, Ca among the studied constituent is higher than the others. The half times of Ca, Mg and Na required for the removal or accumulation of the litters on the grassland floor were 0.76, 0.80 and 0.98 years in Phragmites communis, 1.08, 1.12 and 1.39 years in Miscanthus sacehariflorus 1.05, 2.47 and 1.24 years in Typha angustata and 1.73, 1.26 and 1.10 years in Scirpus tabernaemontani, respectively. Key words: Removal constant, Phragmites communis, Miscanthus scchariflorus, Typha angu-stata, Scirpus tabernaemontani Paldangho. Ca, Mg. Na.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.459-462
• /
• 2010

반도체 공정에서 Track In/Out 판단을 위해서 바코드와 RFID(Radio-Frequency IDentification)가 주로 사용되고 있다. 현재 알려진 바코드 인식률은 약 80%로써 재고 유실이 여전히 존재하며 정확성과 신뢰성을 담보하지 못하고 있는 현실이다. 이 연구에서는 20% 정도의 인식되지 않은 부분을 보완하기 위해 바코드를 영상 처리하고 그 내부에 있는 문자들을 인식하는 프로그램을 개발한다. 해당 공정에서 바코드가 제대로 인식이 안 된 경우에는 인식된 문자들을 참고함으로써 공정의 전체 과정을 파악하고 트랙킹할 수 있다. 바코드의 문자 인식을 생산 공정에 맞추어 실시간에 수향하여 필요시 활용함으로써 공정의 정확성과 생산성을 향상에 기여하고자 한다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.199-212
• /
• 2007

If a type IP-2 transport package were to be subjected to a free drop test and a penetration test under the normal conditions of transport, it should prevent a loss or dispersal of the radioactive contents and a more than 20% increase in the maximum radiation level at any external surface of the package. In this paper, we suggested the analytic method to evaluate the structural safety of a type IP-2 transport package using a thick steel plate for a structure part and a bolt for tying a bolt. Using an analysis a loss or dispersal of the radioactive contents and a loss of shielding integrity were confirmed for two kinds of type IP-2 transport packages to transport radioactive waste drums from a waste facility to a temporary storage site in a nuclear power plant. Under the free drop condition the maximum average stress at the bolts and the maximum opening displacement of a lid were compared with the tensile stress of a bolt and the steps in a lid, which were made to avoid a streaming radiation in the shielding path, to evaluate a loss or dispersal of radioactive waste contents. Also a loss of shielding integrity was evaluated using the maximum decrease in a shielding thickness. To verify the impact dynamic analysis for free drop test condition and evaluate experimentally the safety of two kinds of type IP-2 transport packages, free drop tests were conducted with various drop directions. For the tests we examined the failure of bolts and the deformation of flange to evaluate a loss or dispersal of radioactive material and measured the shielding thickness using a ultrasonic thickness gauge to assess a loss of shielding integrity. The strains and accelerations acquired from tests were compared with those by analyses to verify the impact dynamic analysis. The analytic results were larger than the those of test so that the analysis showed the conservative results. Finally, we evaluated the safety of the type IP-2 transport package under the stacking test condition using a finite element analysis. Under the stacking test condition, the maximum Tresca stress of the shielding material was 1/3 of the yielding stress. Two kinds of a type IP-2 transport package were safe for the free drop test condition and the stacking test condition.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.2
• /
• pp.71-79
• /
• 2015

This paper describes vegetation based soil-media hydroseeding measures that have been previously applied as slope revegetation methods show problems such as insufficient binding force, drying, and insufficient organic matter. In particular, in the case of slope faces in regions where scattering is severe, a vicious circle exists in which remarkably low vegetation cover rates and increases in withering rates over time lead to further decreases in vegetation cover rates, which lead to further increases in erosion and scattering. Therefore, in the present study, environment friendly soil stabilizers were applied for resistance against erosion or scattering and engineering evaluations such as long-term immersion tests and flow resistance tests were conducted to determine appropriate mixing ratios. According to the results of long-term immersion tests utilizing environment friendly soil stabilizers and existing greening soil based materials, 100% collapse occurred at 30 hours and 40 days in the case of soil stabilizer mixing ratios of 0% and 2%, respectively. While the original form of the samples remained intact until the experiment was completed in the case of mixing ratios exceeding 4% indicating that 2% or higher soil stabilizer mixing ratios could affect the maintenance of forms even under extreme conditions. In addition, artificial rainfall tests were conducted on 40, 45, and 55 degree slope faces to evaluate the structural stability of vegetation based materials. Flow resistance tests were conducted on soil stabilizer mixing ratios of 0, 4, 8% to evaluate erosion resistance capability. Based on the results of the tests, environment friendly soil stabilizers applied for prevention of scattering or resistance against erosion by rainwater are considered to provide large effects to reduce losses and loss rates showed a tendency of decreasing rapidly when soil stabilizers were mixed.