• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.96.2-96.2
• /
• 2010

본류부에서 지류부로 유입되는 흐름의 내측 벽면에는 토사나 오염물의 퇴적물침전이 발생하게 된다. 이는 개수로 분류흐름의 특성으로 인하여 이차류 흐름이 나타나는 분리구역이 발생하기 때문이다. 수치모의를 실행하여 Hsu 등(2002)과 Ramamurthy 등 (2007)의 분류흐름 수로의 결과값과 수치모의를 통한 결과를 비교하여 신뢰성이 높음을 알 수 있었다. 본 연구에서는, 분류흐름에서 발생하는 분리구역을 줄이기 위해 분류가 시작되는 본류의 수로의 크기 조절을 통하여 분리구역의 크기를 줄였다. 또한 변형으론 인한 분리구역을 줄이기 위해 본류와 지류가 만나는 모서리 지점을 곡선과 대각선으로 연결하여 유수흐름을 완만하게 만든 지형들을 제안하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.132-136
• /
• 2011

수제는 유수에 의한 하안 침식을 방지하기 위한 목적의 수공구조물이다. 최근에는 하천복원 및 생태계복원에 대한 관심이 증가되면서, 하안 침식 방지뿐만 아니라 수제에 의한 흐름분리 및 재순환영역의 생태 서식처 제공에 대한 역할이 부각되고 있다. 따라서 수제 설계 시, 수제 설치에 따른 수리특성 변화를 미리 파악하는 것이 필요하지만, 수제 간격, 설치 방향, 수제 높이, 수제 길이, 하도 특성 및 접근 유수 특성 등 다양한 인자에 의해 수리특성 변화를 예측하기란 쉽지 않으며, 비용과 시 공간 측면에서 물리 모형을 이용한 접근법도 용이하지 못하다. 따라서 본 연구에서는 2차원 수치모형을 이용하여 수제 설치에 따른 흐름특성 변화를 모의하고, 모형의 적용성을 판별하고자 하였다. 지배 방정식은 기본적으로 천수방정식을 적용하게 되는데, 수제 주변 흐름 특성은 난류에 의한 횡방향 확산이 중요한 인자로작용하게 된다. 상수 와점성(constant eddy viscosity) 모형, 포물선형 와점성 (parabolic eddy viscosity) 모형을통해 개발 모형의예측 결과와 실험수로 결과를 비교하였다. 수제하류의 재순환영역의 길이가 실험수로의 결과에 비해서 5~6 배까지 확대된 결과를 나타내고 있어, 만족할 만한 결과를 현재까지 얻지 못하였다. 횡방향 확산이 중요한 만큼 k-$\varepsilon$ 모형 등 다양한 난류 모형의 적용이 고려되어질 필요가 있으며, 또한 1차원 요소가 아닌 2차원 요소의 적용을 고려할 필요도 있다.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.4
• /
• pp.48-53
• /
• 2016

The centrifugal separator which uses gravity separation method for oil-water separation, rotating at high-speed, is one of the most commonly used device for controlling the amount of the oil in waste water collected in bilge. The IMO (International Maritime Organization) has set regulations, also known as MARPOL 73/78, for the prevention of marine pollution. In addition, DET NORSKE VERITAS (DNV) has set standards regarding the assignment of Environmental Class Notation, CLEAN or CLEAN DESIGN, of ships. One of the requirements for classification is that in addition to conforming to MARPOL 73/78, more stringent measures must be taken as well. One of these measures is to limit the oil concentration in bilge water to less than 5ppm. So in this study, an Oil-Water Separator (OWS) is used together with multiple separating plates as a filtration system to be used as an oil-water separation device. The OWS operates using centrifugal separation in which the mixture is separated by centrifugal forces. The main purpose of this paper is to present the OWS separation efficiency according to the rotation speed, mass-flow rate, the angle and the number of stacked layers of the laminated plate using Computational Fluid Dynamics (CFD). Improvements to the device will be investigated from these results.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.05a
• /
• pp.103-108
• /
• 2006

Treatment of O/W Emulsion is very important to develop 15ppm Bilge Separator for new IMO regulation It is too difficult to demulsify the emulsion in the bilge waste water, so we use chemical treatment to break emulsion stability. Broken oil particle is treated by flotation 15ppm Bilge Separator on the Ship doesn't have enough time to treat Bilge waste water because of limited space in the ship. For the solution to this problem, we experiment to find primary factors as coagulant, pH, amount of inputting coagulant, and type of flotation. On the basis of test results, we decided primary factors.

• Membrane Journal
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2023

In this review, surface modification methods of hydrophobic poly(tetrafluoroethylene) (PTFE) membrane are introduced and their improved hydrophilicity results are discussed. Fluoropolymer based membranes, represented by PTFE membranes have been used in various membrane separation processes, including membrane distillation, oil separation and gas separation. However, despite excellent physical properties such as chemical resistance, heat resistance and high mechanical strength, the strong hydrophobicity of PTFE membrane surface has become a challenging factor in expanding its membrane separation application. To improve the separation performance of PTFE membranes, wet chemical, hydrophilic coating, plasma, irradiation and atomic layer deposition are applied, modifying the surface property of PTFE membranes while maintaining their inherent properties.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.800-805
• /
• 2016

Rapid growth in nanotechnologies promises novel benefits through the exploitation of their unique industrial applications. However, as the production volume of nanomaterials increases, their unintentional exposure to the environment has been occured. Potential impacts of nanoproducts on the environment can be evaluated in the life cycle assessment (LCA). LCA is the systematic analysis of the resource usages and emissions over the life time from the primary resources to the moment of disposal. In this study, we performed LCA for fabrication processes of superhydrophilic oil/water separator using nano-$TiO_2$. $TOTAL^{TM}$ freeware was used to analyze for all fabrication processes, and 6-environmental impact factors (resource depletion, climate change, ozone depletion, acidification, eutropication, and photochemical oxidation) were introduced. In addition, the use of nano-$TiO_2$ in the fabrication of superhydrophilic oil/water separator was actively contributed to the environmental impact factors, compared to the bulk-$TiO_2$.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.2
• /
• pp.53-57
• /
• 2009

The dividing flow in an open channel has a number of distinctive characteristics. One of these is that the separation zone interacts with a secondary motion along the inner wall of a branch channel, generating sediment accumulation. To investigate this phenomenon, a two-dimensional numerical model based on the shallow-water equations, RMA2, which calculates water surface elevations and horizontal-velocity components, was used to analyze the dividing flow. The obtained numerical results fully coincide with the laboratory measurements reported by Hsu et al.(2002). For the analysis of the numerical results, a separation zone-discharge rate relationship was proposed. To reduce the size of a separation zone, the topographies of diagonal and curved edges were proposed, smoothly connecting the upstream corner to branch channel.

• 한국약용작물학회:학술대회논문집
• /
• 2008.05a
• /
• pp.312-313
• /
• 2008

• Digital Contents
• /
• no.4 s.131
• /
• pp.37-46
• /
• 2004

속도가 느린 모뎀으로 데이터통신을 할 수 있다는 사실에 고마움을 느낀 게 바로 얼마전이지만 이제는 거리에서 게임을 즐기고, 차안에서도 주식시세를 확인하는 세상을 살고 있다. 더구나 유선과 무선으로 분리됐던 통신망을 단일망으로 통합하는‘NGN’에 이어 더 포괄적인 개념의‘BcN’구축사업이 본격화되고 있고, 곳곳에 컴퓨터 칩과 센서가 박히는‘유비쿼터스 시대’도 눈앞에 두고 있다. 언제(anytime), 어디서나(anywhere), 어느 기기(any device)든지, 미디어에 구애받지 않고(any media) 소통할 수 있는 4any시대가 열리고 있는 것이다. 이에 발맞춰 세계 유수의 기업들은 저마다 새로운 승부수를 던지고 있다. <디지털콘텐츠>는 2회에 걸쳐 인프라 변화추이를 살펴보고, 이에 따른 차세대 디지털콘텐츠 산업을 조망한다

• Journal of the Korean Society of Safety
• /
• v.12 no.2
• /
• pp.22-26
• /
• 1997

A small scale centrifugal oil separator consisted of two concentric tubes was fabricated for spilt oil recovery. With speed control of the inner tube, its performance of oil separation was investigated. Oil-water mixture is separated by forced vortex motion with the rotating inner tube. Velocity and pressure distributions in the tubes were calculated. Control of rotating speed, which is the most influencing parameter, showed an optimum value 946rpm corresponding to the acceleration of 20g at the inner tube surface. Separation performance was suddenly deteriorated at rotating speed higher than 1200rpm.