• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.181-183
• /
• 2022

항해통신장비는 수년간 유선형 핸드마이크를 사용하여 왔다. 시대 변화에 맞추어 근거리 통신기술을 접목한 무선형 핸드마이크개발로 사용자의 편의성을 증대하였다. 저전력근거리 통신기술 접목으로 무선화 가능성 확인 및 유선형 핸드마이크 겸용으로 가청능력 향상 및 통신감도에 대한 차이점 식별을 최소화 하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.3
• /
• pp.95-102
• /
• 2018

As a recent technical approach, a high-speed planing hull was tried to realize a friction reducing system by simultaneously actuating the triple streamlined step hull form in association with optimum speed of 35 knot planing for fishing boat. In this approach, the streamlined step hull form with triple structure of type was attached under the bottom of high-speed planing hull, while a friction resistance is reduced in the process of running at the speed of 35 knot. In addition, this research was to make a performance test as to the manufactured product and acquire the purposed values and the development items. Actually, after manufacturing the desired prototype of high-speed planing hull, the significant items, fuel efficiency (second) and amount of fuel consumption (degree) including maximum speed (knot) were estimated for a performance test. And tensile strength (MPa) and bend strength (MPa) as to the completed prototype like a high speed planing hull were also acquired during the test.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.14 no.2
• /
• pp.2668-2676
• /
• 1972

• The Science & Technology
• /
• v.35 no.8 s.399
• /
• pp.28-29
• /
• 2002

석빙고는 자연 환기구의 적절한 배치, 유선형의 외부형태, 배수구의 이용, 흙과 돌의 열전도율의 차이를 이용한 축열구조의 채택 등 기계장치와 비교하여 결코 떨어지지 않는 과학적 기술이 접목된 것이다.

• Journal of the Korean Society for Railway
• /
• v.16 no.3
• /
• pp.169-174
• /
• 2013

The effect of modifying the shape of a high-performance EMU train on the aerodynamic drag is studied here using Computational Fluid Dynamics(CFD) based on three dimensional Steady-state Navier-Stokes equation and two equation turbulence modeling. FLUENT 12 and Gambit 2.4.6 are employed for a numerical simulation of the aerodynamic drag of a streamlined-shape train as well as a proto type train. The characteristics of the aerodynamic drag of trains in tunnels are analyzed in a comparison with these characteristics in an open space. The contribution of the aerodynamic drag of each case is also investigated to establish principal pertaining to drag reduction for urban trains in tunnels. The aerodynamic drag of a streamlined train was reduced to 9.8% relative to a proto-type train with a blunt nose and a protruding roof facility and underbody shape: the running resistance is expected to be reduced by as much as 4% at a running speed of 80km/h.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.245-253
• /
• 2008

The purpose of this study was to analyze the effects of shoes with curved out-sole on the posture variation and its control strategy. At first, Target shoes(s) was made by evaluating the static postures of 7-female university students via 'New York State Posture Test' on shoes which made the relative angle between foot surface and ground surface of shoe change. At second, we evaluated muscle activity for 30-female university students(10 persons-3 groups) on shoes which were s(target), m shoes with curved out-sole and n shoes with flat out-sole. 1. The posture scores on New York State Posture Test were statistically different according to the relative angle changes, and the best angle for score was -7 degree but, the scores charts were like two humped camel at -2, -7degree. we made the shoe with -7 degree and curved out-sole. 2. s, m shoes with curved out-sole had graded muscle activities but, static posture on bare foot, there were the graded activity on gastrocnemius for s shoes and tibialis anterior for m shoes, but on shoes, only Gastrocnemius for s shoes.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.221-229
• /
• 2013

To achieve the best performance, the concept of drag reduced and power increased Human Power Aircraft(HPA) was presented by analyzing the HPAs in the world. To participate the '2012 HPA competition' in Korea, the streamlined fuselage and the simultaneous use of hands and feet were introduced. Furthermore the CFD analysis and power unit design were performed to verify the concept. In order to make the best use of streamlined fuselage effect, the fuselage shape design is important and to supply the hand power to the power unit, the control system design is important, also the test flight is required for validation.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2678-2680
• /
• 2005

본 연구는 산업현장에서 널리 사용되고 있는 PLC(Programmable Logic Controller)의 정의와 구조에 대해 설명하였다. 또한 기존의 유선형PLC에 IT기술을 접목시킨 네트워크 지향형 콘트롤러의 개념, 원리 및 산업현장 조건에 따라 네트워크시스템 제어방식을 달리 적용하여 최적의 시스템을 구현하는 유, 무선PLC의 적용사례를 연구하여 시스템 제어의 첨단화, 신뢰성, 경제성을 기술하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.2
• /
• pp.198-204
• /
• 2016

In this study, a wind tunnel test was conducted to measure the aerodynamic characteristics of a streamline-designed high-speed bus with the change of wind direction and speed and the result is compared with the aerodynamic performance of a commercialized high-speed bus model (Model-0) manufactured by Zyle Daewoo Bus Corp. Aerodynamic performance of the existing rear-spoiler was tested to prove its aerodynamic effect on the test model bus. From the study, it was found that 24.6 % of the total drag of the original bus model (Model-0) was reduced on the streamline-designed model bus(model-1) without the rear-spoiler but only 14.3 % of the total drag was reduced with the spoiler on the streamlined model bus. It means that the rear spoiler does not work properly with the streamlined model bus (model-1) and should be noted that an optimum design of a rear-spoiler of a vehicle is important to reduce the induced pressure drag and increase the driving stability of a vehicle against yaw motion. The experimental outcome was also compared to the previous numerical research result to evaluate the reliability of the numerical algorithm of the aerodynamic performance analysis of a vehicle. The error rate (%) of the numerical result to the experimental output is about 5.4 % and it is due to the simplified body configuration of the numerical model bus. The drag increases at the higher yaw angle because the transparent frontal area of the model vehicle increases and the downward force increases with the yaw angle as well. It has a positive effect to the driving stability of the vehicle but the moderated downward force should be kept for the fuel economy of a vehicle.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.69-69
• /
• 2011

본 논문에서는 비정상 상태의 비압축성 유동장을 해석하기 위하여 물체맞춤격자방법이 아닌 가상경계법을 사용하였다. 가상경계법은 구조격자를 사용하여 구조물 경계면에서 Momentum Forceing을 사용하여 가상의 경계를 만들어 유동장을 해석하는 방법이다. Navier-Stoke 방정식의 수치 이산화 방법으로 Kim et al(1985)이 사용한 Fractional Step Method(FSM)을 사용하였다. 시간에 대하여 semi-implicit FSM를 사용하였고, 확산항에 대해서는 2차 정확도의 Crank-Nicolson Method를 대류항은 3차 정확도의 Runge-Kutta Method를 사용 하였다. 본 연구에서는 가상경계법을 이용한 유동장 해석이 교량 단면에 대하여 수치해석이 가능한지 검토하였다. 가상경계법은 현재 많은 연구가 유선형의 구조물에 대하여 수행되어 오고 있다. 교량 단면과 같은 각 진 구조물에 대한 검토는 아직 미비한 실정이다. 가상경계법에서 다루고 있는 구조물 경계면에서의 Momentum Forcing 방법이 유선형의 구조물에 맞추어 연구가 진행되었기 때문이다. 먼저 본 연구의 프로그램을 검증하기 위하여 원형 실린더에 대하여 가상경계법을 적용한 결과 Re 수 200에서 Strouhal Number, 양력계수, 항력계수를 이전 연구 결과와 비교하였다. Williamson(1988)과 Zhang(1995)의 연구결과와 유사한 결과를 얻을 수 있다. 그리고 교량의 단면과 같은 각진 구조물(Bluff Body)에 대하여 가상경계법 적용하였다. 본 논문의 연구에서 평가 대상으로 하고 있는 2차원 교량 단면에 대하여 유동장 해석을 하였다. 본 논문에서 정량적인 유체력과 유동장에 대한 비교 및 검토가 이루어지지 못했지만 압력장과 유선의 형태가 이론적인 값을 벗어나지 않고 있는 것으로 확인 되었다. Re 수 2700에서 전산 해석을 수행하였으며, 교량 단면 주위의 압력계수와 박리현상 그리고 후류에서의 Vortex shedding 현상이 모두 적절한 분포가 나타나는 것을 확인할 수 있었다. 따라서 가상경계법을 이용하여 각진 구조물에 대한 주위 유동장해석에 대한 가능성을 확인하였으며, 풍동실험과의 결과비교를 통하여 가상경계법을 이용하여 교량 단면 주위의 유동장 해석 결과를 정량적으로 비교할 것이다.