• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제30권2호
• /
• pp.74-80
• /
• 2017

This study focuses on the effects of doping $Zn_2BiVO_6$ and $Co_3O_4$ on the sintering and electrical properties of ZnO; where, ZZ consists of 0.5 mol% $Zn_2BiVO_6$ in ZnO, and ZZCo consists of 1/3 mol% $Co_3O_4$ in ZZ. As ZnO was sintered at about $800^{\circ}C$, the liquid phases, which are composed of $Zn_2BiVO_6$ and $Zn_2BiVO_6$-rich phases, were found to be segregated at the grain boundaries of sintered ZZ and ZZCo, respectively, which demonstrates that $V_o^{\cdot}$(0.33~0.36 eV) are formed as dominant defects according to the analysis of admittance spectroscopy. As $Co_3O_4$ is doped to ZZ, the resistivity of ZnO decreases to ~38%, while donor density ($N_d$), interface state density ($N_t$), and barrier height (${\Phi}_b$) increase twice higher than those of ZZ, according to C-V characteristics. This result harbingers that ZZCo and its derivative compositions will open the gate for ZnO to be applied as more progressive varistors in the future, as well as the advantageous opportunity of manufacturing ZnO chip varistors at lower sintering temperatures below $900^{\circ}C$.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• 제46권4호
• /
• pp.42-50
• /
• 2009

Ubiquitous computing technology is widely used in not only our everyday lives but also in education, medical care, military, environment and administration. RFID system, the basis of ubiquitous, is in the spotlight which can be an alternative solution of a bar code recognition system and magnetic system as they basically have practicality and security issues. An electronic authentication named smart-key system is recently concerned by an alternative solution of the security unit for an automobile. RFID system which has a general purpose is also in the limelight by an application technology. In this paper we designed vehicle smart key system with general-propose RFID system that is already in use. First, we designed control unit and RFID card reader for vehicle smart key system. Then we propose an algorithm and prove that the vehicle key system is controllable by showing the result of implementing and testing, after installing. Also security level is enlarged by proposing a authentication protocol between RFID reader and control unit.

• Journal of the Korean earth science society
• /
• 제28권4호
• /
• pp.393-404
• /
• 2007

The purpose of this study was to identity scientific models included in the Earth domain of the $10^{th}$ grade science textbooks. Three earth science-related chapters in each of 11 trade books were analyzed. A framework was developed and used to classify a scientific model from three different perspectives: medium of representation, method of representation, and mobility of a model. Results showed that the science textbooks utilized domain-specific models in which the nature of sub-areas of earth science was embedded. That is, the unit of 'Change of the Earth' included many iconic models that represented the inaccessible inner structure of the earth and the movement of the tectonic plates. These were also two-dimensional pictorial and static models. In the chapter of 'Atmosphere and Oceans', symbolic and diagrammatic models were dominant in use, which included weather maps and contour line graphs of sea surface temperature and salinity. The unit of 'Solar System and Galaxies' showed the highly frequent use of iconic and analogical models for the large-scale celestial objects and their movements. Implications for earth science education and relevant research were discussed.

• Journal of The Korean Association For Science Education
• /
• 제34권8호
• /
• pp.755-765
• /
• 2014

The convergence and consilience in education (hereafter, interdisciplinary education) is receiving great attention from societies. This study aims to investigate the works of scientists and artists who have intended to combine science with the arts in the modern era, to take into account the socio-philosophical setbacks during the period, and to suggest pedagogical implications of science education as interdisciplinary education. The concept of interdisciplinary education stems from Plato's thought, idea, as a comprehensive and invariant truth. The renaissance, full of enrichment about scientific achievement, was based on Neo-Platonism pursuing holistic-synthetic approach. During the time, scientists presented in this study tried to find comprehensive principles and borrow useful method from the arts. In such a context, scientists not only made use of the arts for expression of scientific knowledge, but also drew conclusion by analogical reasoning between science and the arts. Artists, as well, relied upon anatomy and optics especially, to elaborate linear perspective and even developed their own scientific knowledge through personal experience. Hence, contemporary science education should encourage students to hold a holistic viewpoint about science and the arts, articulate explicit goals and outcomes as interdisciplinary education, implement meta-disciplinary instruction about science and the arts, and develop assessment framework for collaborative learning. There may be good examples for inter-disciplinary education as listed: illustrating scientific ideas through the arts and vice versa, organizing collaborative works and evaluations criteria for them, and stressing problem solving on a daily basis.

• Journal of Physiology & Pathology in Korean Medicine
• /
• 제23권2호
• /
• pp.325-330
• /
• 2009

In Korea, medical diagnostic equipments and biochemical examination can not be used in order for diagnosing sub-healthy state or ante-disease state in oriental medicine clinic. So morphic analogical method used in oriental medicine can be a good tool as a disease-predictable signs in order to enable preventive diagnosis and therapy. Therefore the four geometrical subjects; Essence, Pneuma, Spirit, Blood(四科;精氣紳血) and the four taxonomical species; Pisces, Quadruped, Aves, Carapaces(四類;魚走鳥甲) are chosen as morphic models in this paper. The differences of two classifying methods with four subjects and four species were as follows. The diagnostic category was meta-medical and synthetic against medical specific. The diagnostic object was body in contrast with face. They were able to be applicant in psychology and classification of characteristics against diagnostics and therapeutics directly in oriental medicine. The theoretical basis was basic diagrams of four unit-fluids of body and morphological analogy with four animal species respectively. And the therapeutic aims were systemic pathogenesis following five phase theory against congestion and deficiency of Essence, Pneuma, Spirit, Blood. The four subjects and four species are mixed each other practically in clinic. But it should be used limitedly because of the above reasons described and must divide the principal and secondary factors and follow the pathology of principal shape factor. In order to improve the diagnostic value of ante-disease state, the discriminable standards, measurement methods, limit of interrelating interpretation and the criteria of abnormal disproportion were needed to be defined more clearly in advance.

• Economic and Environmental Geology
• /
• 제32권5호
• /
• pp.445-454
• /
• 1999

The Sanjeon Au-Ag deposit consists of three subparallel hydrothermal quartz-calcite veins which filled fault-related fractures (generally $N20^{\circ}$ to 35"W-trending and $70^{\circ}$ to $80^{\circ}$ SW-dipping) within quartz porphyry. The vein mineralization shows an apparent variation of mineral assemblages with paragenetic time: (1) early, white quartz + pyrite + arsenopyrite + brown sphalerite, (2) middle, white (vein) to clear quartz (vug) + base-metal sulfides + electrum + argentite, (3) late, calcite + pyrite + native silver. Mineralogic and fluid inclusion data indicate that gold-silver minerals were deposited at temperatures from 2l $0^{\circ}$ to $250^{\circ}$ with salinities of 4 to 5 wt. % equiv. NaCl and log fS2 values from -14.0 to -12.2 atm. The linear relationship between homogenization temperature and salinity data indicates that gold-silver deposition was a result of meteoric water mixing. Ore mineralization occurred at pressure conditions of about 70 bars, which corresponds to the mineralization depths of about 260 m to 700 m. There is a remarkable decrease of the calculated 1)180 values of water from 1.3 to -9.7%0 in hydrothermal fluid with increasing paragenetic time. This indicates a progressive increase of meteoric water influx in the hydrothermal system at the Sanjeon deposit. Oxygen-hydrogen, sulfur, and carbon isotope values of hydrothermal fluids indicate that the ore mineralization was formed largely from meteoric waters with the contribution of sulfur and carbon from a deep igneous source.

• Economic and Environmental Geology
• /
• 제20권1호
• /
• pp.19-34
• /
• 1987

The Nokdong As-Zn deposit, located 28 km south of Kyeongju City, Southern Korea, has been investigated by a deep drilling programme. The mineralized zone is roughly 290m long and 180m wide at surface and is hosted in a pipe diatreme infilled with poor to well bedded felsic volcaniclastics. The diatreme was formed by explosive volcanic activity, of probably early Tertiary age, subsequent hydrothermal alteration and mineralization took place concurrently within stratigraphic layers in diatreme. Coarse volcaniclastics in the center part of the diatreme, together with complex systems of fracturing, acted as pathways for late hydrothermal fluids which caused alteration of volcanic material to sericite, chlorite and carbonate and precipitated ore minerals, quartz and calcite in the voids. Porosity and permeability were key factors in determining which portions of the layered diatreme were mineralized. The lower part of certain layers retained a relatively high porosity and were extensively mineralized. Metallic mineralization, consisting mostly of pyirte, sphalerite and arsenopyrite, is found as disseminations, tuff-breccia filling and veins.

• Journal of the Korean Institute of Landscape Architecture
• /
• 제38권4호
• /
• pp.45-53
• /
• 2010

This paper has attempted to propose a more progressive direction for U-environmental sculptures in a ubiquitous urban space in terms of usability, service, function and formative characteristics that enhance user satisfaction with these sculptures. For this, Media Pole, a U-environmental sculpture on Gangnam U-Street, has been examined. The results of this study are as follows: First, a study of user satisfaction was planned after establishing levels of satisfaction in terms of service, function and formative characteristics. In terms of satisfaction by the section of Media Pole, the public transportation map was the most influential in service while street culture and beauty of shape were critical in function and formative characteristics, respectively. In the relationship between satisfaction by section and overall satisfaction, furthermore, functional satisfaction had the biggest influence. Therefore, the development of human-centered functional factors which have pleasant and touching stories to facilitate communication with citizens are important in order to develop various Media Pole contents to enhance user satisfaction with the U-environmental sculpture and allow it evolve into a Gangnam landmark Since we are in the initial stage of a U-city, there are many problems that need to be addressed such as a lack of natural beauty, poor material quality of environmental sculptures, absence of storytelling, poor technology, lack of content, poor profitability and lack of means of social communication. In the end, the development of a comfortable, people-friendly space and U-environmental sculptures are needed in consideration of economic, social and cultural aspects instead of focusing on advanced technology only.

• Journal of the Mineralogical Society of Korea
• /
• 제19권4호
• /
• pp.337-346
• /
• 2006

The Jinwon Pb-Zn deposit is located within the Precambrian Youngnam Massif. Ore mineralization at the Jinwon deposit occurred in quartz veins that filled fractures in the Hongjesa granite. Mineral paragenesis can be divided into two stages(stage I and II). Stage I, at which the precipitation of major ore minerals occurred, is further divided into two substages with paragenetic time based on minor fractures and discernible mineral assemblages: substage la is characterized by pyrite, arsenopyrite ($28.4{\sim}30.3$ atomic % As), pyrrhotite, magnetite, chalcopyrite, sphalerite ($13.1{\sim}16.0$ mole % FeS) assemblages; substage $I_a$ is represented by main precipitation of Zn, Pb minerals and is characterized by sphalerite ($15.1{\sim}19.0$ mole % FeS), galena, miargyrite, argentile assemblages. Stage II is economically barren quartz veins. Thermodynamics study is used to estimate changes in chemical conditions of the hydrothermal fluids during stage I mineralization, the main ore deposition period at the Jinwon hydrothermal system. The range of estimated sulfur fugacity ($fs_2$) was from $10^{-7}\;to\;10^{-16}$ atm and oxygen fugacity ($fo_2$) was in the range of $10^{-32.8}{\sim}10^{-38.5} atm$. Carbon dioxide fugacity ($fco_2$) was $<10^{-0.6} atm$.

• The Korean Journal of Applied Statistics
• /
• 제26권1호
• /
• pp.151-162
• /
• 2013

Due to a growing demand for the second-hand product, especially for the expensive one, the warranty and maintenance policies for such products have been studied to improve the product reliability of late. In this paper we study a periodic maintenance model for the second-hand product which is purchased by the customer at the age of $x$. When purchased, the dealer provides a warranty of a fixed length during which the product is maintained periodically to reduce the failure rate of the product and thus, to improve the reliability after each maintenance is served. If a failure occurs between two successive maintenances, only minimal repair is conducted. As for the warranty policy, we adopt free non-renewing repair action on each failure, in addition to the periodic maintenance service during the warranty period. Thus, under the given warranty policy, all the maintenance and repair costs incurred during the warranty period are charged to the dealer. For the proposed periodic maintenance scheme, we formulate a cost model to evaluate the expected total cost charged to the dealer during the warranty period and derive an optimal upgrade level of the failure rate at each maintenance to minimize the expected total warranty cost from the perspective of the dealer. We also present numerical results for an optimal upgrade level based on the proposed methods.