• The Korean Journal of Rheology
• /
• v.10 no.1
• /
• pp.24-30
• /
• 1998

솔젤법을 이용하여 단분산의 실리카 입자를 제조하고 농도변화에 따른 실리카 분산 액의 유변학적 거동을 해석하였다. 단분산 실리카 입자의 제조는 솔젤법을 이용한 액상반으 으로 제조하였고 입자의 안정화를 위하여 입자표면에 실란커플링제를 코팅하여 유기용매에 서 안정성을 갖도록 하였다. 분산액의 농도에 따른 유변학적 거동을 조사하기 위하여 부피 분율( )이 0.05인 희박 분산계로부터 =0.55의 고농도 분산계를 제조하였다. 솔젤법을 통하 여 단분산 실리카 입자를 성공적으로 제조하였으며 실란커플링제인 ${\gamma}$-methacryloxypropyl triethoxysilane로 입자의 표면을 화학적 방법으로 처리하여 유기용매 상에서 알킬기의 작용 에 의한 hard-sphere'특성을 나타내도록 하였으며 동시에 분산안정성을 유지할수 있었다. 입자 분산계는 =0.25이하의 부피농도에서는 분산용매와 같은 뉴톤거동을 보여주었으며 이 이이상의 농도에서는 비뉴톤거동인 전단담화(shear thinning)현상과 high shear limiting viscosity를 나타내었다. 이결과는 Krieger-Dougherty 식을 따름이 확인되었으며 부피분율 =0.50정도까지도 이식이 잘적용됨을 확인하였다. 부피분율 =0.50 이상의 고농도 입자 분산계 는 급격한 점도의 증가와 함께 전단담화와 전단탁화(shear thickening)현상이 모두 관찰되었 다. 특히 전단탁화를 일으키는 특헝전단변형률(cr)이하의 전단변형률에서는 안정되고 빠른 점성반응(viscous response)을 보여주었으나 특성 전단변형률 부근과 이상의 전단변형률 영 역에서는 매우 불안한 거동이 보여짐을 확인하였다. 그러나 이러한 점도 거동은 가역적이며 전단변형률을 증가시킬때와 감소시킬 때의 유변학적 거동이 거의 일치하였다.

• Journal of Aerospace System Engineering
• /
• v.11 no.4
• /
• pp.8-14
• /
• 2017

In this study, the production of proper emulsion fuel and the evaluation of its rheological stability in various experimental conditions were carried out. The W/O (water-in-oil) emulsion fuel was made using n-decane, pure water, and Span 80 was used as a surfactant. Increments of water volume ratio and fuel temperature were the factors, which boosted the phase separation of the emulsion fuel. Rheological characteristics for different water/oil volume ratio, temperature, and elapsed time after the fuel production were examined. As the water volume ratio in the fuel increased, the behavior of non-Newtonian fluid was observed. Viscosity declined as the fuel temperature increased due to the cohesion of water droplets in the fuel. The effect of elapsed time on viscosity was not severe for lower water ratio. However, gradual decrease of viscosity 3 hours after fuel production, in the case of ratio of 3:7, was clearly observed.

• The Korean Journal of Rheology
• /
• v.10 no.3
• /
• pp.131-136
• /
• 1998

아역청탄을 이용하여 제조된 CWM(Coal-Water Mixture)연료의 유변학적 특성을 측 정함으로써 음이온 계면활성제 Temol-N, 안정제 Xanthan 및 전해질 등의 첨가제에 대한 성능을 평가하고 최적첨가조성을 결정하였다. 계면확성제의 흡착으로 인해 석탄입자는 음전 하를 띠게 되었고 표면에 전기이중층이 생성되었다. 전기 이중층의 전기적 반발력이 입자의 응집을 막았고 CWA 슬러리의 점도를 감소시켰다. 또한 Xanthan과 NaOH의 첨가로 인해 분산안정성 및 침강안정성이 향상되는 것을 관찰하였다. CWM에서 석탄입자가 차지하는 부 피비를 무게비로 전환하여 표현하고 분산계에서 입자의 부피비에 따른 점도변화를 예측하는 실험식인 Krieger-Dougherty 식과 Frankel-Acrivos 식에 적용하였다. 점도 실험값을 가지 고 식의 변수들을 결정해 본결과 CWM이 나타내는 점도의 석탄함량에 따른 변화를 위 식 들이 비교적 정확시 나타내 주는 것을 확인하였다.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.679-690
• /
• 2001

High resilience PU foams were prepared with polyether type cell opener. The influences of cell opener concentration on the kinetics, rheology, structural stability morphology and open cell content of the obtained foam were investigated and the role of cell opener during cell opening was determined. And mechanical properties as a function of cell opener concentration were studied. It was observed that urea formation reaction was delayed due to high hydrophilicity of cell opener The decrease of viscosity and the increase of tan $\delta$ were confirmed with increasing cell opener concentration so that the resulted foam had low structural stability and high open cell content. The deterioration of matrix and uniform dispersion of hydrogen-bonded urea in matrix with cell opener concentration was revealed by SEM analysis. As a result, elastic properties of the foam matrix were decreased due to high hydrophilicity of cell opener during the preparation of high resilience polyurethane foam and foam with high open cell content resulted. Hardness, tensile strength, tear strength, elongation of foam were decreased with increasing cell opener concentration.

• Elastomers and Composites
• /
• v.36 no.4
• /
• pp.246-254
• /
• 2001

In this work, the stabilization of chlorosulfonated polyethylene (CSM) rubber emulsion with surfactants, i.e., nonionic (Span 60) or anionic (Sodium laurylsulfate, SLS) surfactants, was investigated. The phase inversion emulsification by interfacial chemical characteristics was used to emulsify the CSM rubber. As a result, the emulsion phase separation was observed in the case of any single surfactant. However, there was no phase separation in the mixture of Span 60 and SLS in the context of emulsion droplet size tests and rheological behaviors. The droplet size decreases by increasing the surfactant mixture, resulting in increasing the viscosity. The viscosity and shear stress determined from shear rate show a shear thinning and yield behaviors. It was then found that the emulsion stabilization can be improved using the phase inversion emulsification method and surfactant mixture.

• Applied Chemistry for Engineering
• /
• v.30 no.4
• /
• pp.415-420
• /
• 2019

To investigate the effect of nonionic surfactant and emulsion stabilizer on O/W emulsions, various emulsion formulations with different types of nonionic surfactants and emulsion stabilizers were prepared and their rheological properties were compared. In this study, polysorbate 60 (Tween 60), PEG-60 hydrogenated castor oil (HCO 60), octyldodeceth-16 (OD 16), and ceteareth-6 olivate (Olivem 800) were used as hydrophilic nonionic surfactants, whereas cetyl alcohol, glyceryl monostearate, and stearic acid as emulsion stabilizers. Phase separation occurred only in the emulsion formulation with octyldodeceth-16 and all other emulsion formulations maintained a stable phase. The viscosity, hardness, and creaminess of emulsion formulation using a mixture of ceteareth-6 olivate and cetyl alcohol were the highest, and the emulsified droplet size was also the largest. These results are due to the formation of a network structure texture with the development of a large amount of liquid crystal in the O/W emulsion. In this formulation, the value of elastic modulus was large and the thixotropic behavior, in which the viscosity varies with the history of external force, was observed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.226.2-226.2
• /
• 2014

나노 사이즈의 Ni 입자 ink를 제조하고 이를 전기수력학 인쇄공정에 적용하기 위하여 잉크의 유변학적 특성 및 최적 물성 발현을 위한 인쇄공정에 대한 연구를 진행하였다. Ni 잉크의 점도 및 증발거동 조절을 통해 전기수력학 인쇄공정을 최적화 하는 연구를 수행하였다. Ni 나노입자 잉크의 초기 점도가 낮고 인쇄성이 확보되지 않아 잉크내 응집성을 향상시켜주기 위한 다양한 additive들을 선정하여 전기수력학에 적합한 잉크 물성 확보에 비중을 두고 실험을 진행 하였다. 터비스캔을 사용하여 제조된 잉크 안정성에 대한 연구를 진행하였다. 다양한 인쇄공정 변수의 최적화를 통해 미세선폭 (< 20 um)이 가능한 전기수력학 인쇄공정을 확립하였다.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.685-691
• /
• 2009

Dispersions of fumed silica are made in 6 kinds of mono-solvents and mixed solvents which have hydroxyl group, non hydroxyl group, different polarity, and different molecular size. The viscosity and rheology behaviors of the each dispersion are investigated according to the viewpoint of solvent characteristic. The silica dispersion in polar solvent with hydroxyl group is stable and low viscous sol. The silica dispersion in non-polar solvent with non-hydroxyl group is high viscous gel. When the solvent with hydroxyl group is added to the silica dispersions with non-polar solvents, they show the reduction of viscosity with solvent content. They have minimum critical content which shows no viscosity change. The minimum critical solvent content is decreased according to the polarity of solvents with no hydroxyl group. The solvation layer which is formed on the silica surface through hydrogen bonding between hydroxyl-containing solvent and the silanol group of silica surface is the reason of stable and low viscous sol. In case of non-polar solvent, silanol on adjacent silica particles interacted directly by hydrogen bonding show high viscous and flocculated gel.

• The Korean Journal of Rheology
• /
• v.10 no.4
• /
• pp.195-201
• /
• 1998

We have studied the rheological and electrical properties of two types of electrorheological (ER) fluids based on semi-conductive polymers (poly(p-phenylene) and polyaniline). These semi-conductive polymer-based suspensions showed a dramatic increase in viscosity on the application of the static electric field due to the large value of conductivity ratio between particle and medium. The dynamic yield stresses of these ER suspensions exhibited a quadratic dependence on electric field strength at low electric fields and a linear one for high fields. They showed a maximum and then decreased with increasing bulk conductivity of particles. These yield stress behaviors under the static electric field were found to be closely related to the dielectric properties, which is in accord with Maxwell-Wagner interfacial polarization induced by the conductivity effects. In order to achieve better understanding of interfacial polarization effect on ER response and to improve the stability of ER suspension, different kinds of surfactants were employed for controlling the ER activity as well as for enhancing the colloidal stability of suspensions.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.292-299
• /
• 2012

We made 8 wt% silica dispersion system with fumed silica and photo curable acrylic monomer by beads mill process. These dispersions could be applied in organic/inorganic hybrid coating systems. These dispersions could be applied in organic/inorganic hybrid coating systems. The 4 species of photo curable acrylic monomer which was presence of hydroxyl group, different solubility parameter, and different molecular size were used in the silica dispersions. Stability of polar solvent, isopropyl alcohol, in silica dispersions was investigated. We investigated the stability of silica dispersions by using steady-state and dynamic rheology. As the monomer has hydroxyl group increased in mono and binary monomer silica dispersions, they showed non flocculated stable sol (loss modulus (G")> storage modulus (G')). When polar solvent IPA was added into slightly flocculated silica dispersions, they changed to non flocculated stable sol.