• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.99-104
• /
• 2003

Alumina/zirconia-glass composites prepared by melt-infiltration were investigated to evaluate the influence of zirconia addition on mechanical and optical properties of the composites and glass penetration kinetics. The infiltration distance was parabolic with respect to time as described by the Washburn equation and the penetration rate constant, K, decreased due to the reduction In pore size as the amount of zirconia rose. The zirconia addition increased lightness ($L^*$) but reduced K, transmittance and color sharpness ($C^*$) It can be concluded that the zirconia addition was not effective to the mechanical properties of the composites due to the increase in porosity even though the toughness of the composites increased when zirconia was added up to 15 wt%.

• Journal of the Korean Ceramic Society
• /
• v.41 no.12 s.271
• /
• pp.939-945
• /
• 2004

Glasses of $SiO_2-B_{2}O_3-Al_{2}O_3-CaO-La_{2}O_3$ with various amounts of $La_{2}O_3$ were infiltrated into a porous alumina to make an alumina-glass composite. The infiltration characterization and bending strength of the composite were examined in terms of glass composition. $La_{2}O_3$ in the glass decreased the high temperature viscosity and this enhanced the wetting behaviour of this glass to alumina, and made glass infiltration easier. The infiltrated glass dissolved the alumina skeleton, and $Al_{2}O_3$ component in the glass melt reprecipitated on the alumina. The grain growth occurred to a specific crystal direction. The glass containing $20mole\%$ of $La_{2}O_3$ was crystallized after infiltration, and this enhanced the bending strength of the composite.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.2
• /
• pp.143-150
• /
• 2010

Vitrification technology has been gradually recognized as one of effective solidification methods for concentrated boric acid wastes generated in PWR. Vitrification for low- and intermediate-level radioactive wastes has a large volume reduction and good durability for the final products. A feasibility study for the vitrification of concentrated boric acid wastes has been performed with developing the pre-treatment methods of powdered wastes, glass compositions using glass formulation and demonstration test. The pre-treatment method is pelletizing the powder type for stable feeding within cold crucible melter. The glass compositions should be developed considering molten glass are related with wastes reduction. High contents of sodium and boron within borate wastes give influence to waste loading. A variety of factors obtained from the demonstration test are reviewed, which is wastes feeding rate, off-gas characteristics on stack and glass characteristics of final products such as durability for implementing the wastes disposal requirement. The aim of this paper is to present the feasibility of vitrification and review the solidification method for concentrated boric acid wastes and obtain the physicochemical characteristics of solidified glass.

• Resources Recycling
• /
• v.20 no.2
• /
• pp.74-81
• /
• 2011

The dry method and wet method are currently used for the recovery of platinum group metals (Pt, Rh, Pd) contained in spent automobile catalysts. The study herein aims to identify the melting condition and optimum collector metal in accordance with a comparison of each concentration change in melting waste catalysts, using Fe and Cu in a basic experiment to recover waste catalysts through application of the dry melting method. As a summarized result of the experiment herein, it was determined to be more advantageous to use Fe as a parent material rather than Cu from the aspect of recollection rate, and the concentration change rate of platinum group metals within slag was greatly enhanced at $1,600^{\circ}C$ melting condition rather than at $1,500^{\circ}C$ in terms of melting processing temperature. The mean concentration of platinum group metals - Rh, Pd and Pt - within slag after a melting process at $1,600^{\circ}C$ were 6.21 ppm, 5.98 ppm and 6.97 ppm. The Rh and Pd were 50.58% and 55.31% respectively greater than the concentration change rate of platinum group metals in slag at a melting temperature of $1,500^{\circ}C$. However, since the initial concentration of Pt within the waste catalysts was 12.9 ppm, is relatively low, it was difficult to compare concentration change rates after the melting process.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.5
• /
• pp.246-254
• /
• 2013

Translucent opal glass was fabricated in order to substitute polycarbonate diffuser of LED lighting for the purpose of improving the durability problem. Calcium phosphate was used for the opacifier of opal glass and melted at $1550^{\circ}C$ for 2 hrs in electric furnace. Because opal glass was made by phase separation and growth of opacifier grains during cooling procedure after forming of melted glass, we identified the effect of opaque properties by the change of forming and cooling temperature, as R.T. (room temperature), $850^{\circ}C$, $1100^{\circ}C$ and $1200^{\circ}C$. As the results, it had excellent optical properties for the diffuser of LED lighting in the fabricated sample of forming and cooling at $1200^{\circ}C$, with no dazzling from direct light by high haze value over 82 % and low parallel transmittance value under 10 %. For the thermal properties, it had expressed thermal expansion coefficient of $6.352{\times}10^{-6}/^{\circ}C$ and softening point of $839^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.40 no.11
• /
• pp.1127-1131
• /
• 2003

Phosphate glasses known for low melting temperature glasses in electrical parts has been recently used in wide area with modification of thermal properties using alkali oxides. It is our purpose to find a correlation between thermal expansion coefficient, glass transition temperature and melting temperature through investigating thermal properties in P$_2$O$\sub$5/-SnO-ZnO-SiO$_2$/B$_2$O$_3$. As a result, the product of thermal expansion coefficient and the glass transition temperature in the glasses is found to be a constant value would be a unique value for knowing one of thermal properties.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.31-36
• /
• 2018

Fuses are used to protect electric circuits or devices from excess current. Glass-tube fuses are typically used, but problems have arisen due to the mandated switch from conventional solder to lead-free solder. This study used CFD to simulate the phenomenon of molten solder being poured out of a fuse during the soldering process for a fuse cap and fuse element. In addition, a method is proposed to prevent solder from overflowing, and its effectiveness was verified based on the analysis results. The results show that a sufficient increase of the temperature inside the glass tube before soldering and gravity can help to prevent the solder from overflowing.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.48-53
• /
• 2003

The high temperature melting test for nonflammable wastes using a plasma torch was conducted. The AP-200L hollow cathode type plasma torch was installed at the pilot plasma melting furnace in NETEC. The surrogates were prepared to simulate concrete, soil and their mixture with steel. The experimental conditions such as feeding rate, the distance between melts surface and torch nozzle, torch rotation speed, gas flow rate and pressure in the furnace were decided. Basic parameters such as temperatures of cooling waters, off-gas and torch power were measured. The vitrified samples were analyzed by SEM/EDS.

• Journal of the Microelectronics and Packaging Society
• /
• v.3 no.1
• /
• pp.41-48
• /
• 1996

동시 소성으로 LCR network을 구성하기 위한90$0^{\circ}C$ 소성용 Ru계 저항체를 제조하 였다. 동시 소성에 요구되는 최종온도에 이르기 위해서는 90$0^{\circ}C$에서 용융되는 유리상을 제 조하는 것이 필수적이다. 이 90$0^{\circ}C$소결용 저항 페이스트는 가장 낮은 용융온도를 갖는 PbO 의 양을 감소시키고 알루미나와 실리카의 양을 증가시켜 제조하였다. 본 연구에서는 ferrite 로 이루어진 inductor 그린쉬트 위에 ruthenate 저항체를 인쇄하여 동시소성한후 그 복합체 의 저항 특서에대하여 고찰하였다. PbO의 양이 감소될수록 복합 기판의 면적저항은 증가 되었고 inductor 기판 위에 잔류되는 저항페이스트의 양도 함께 증가하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.4
• /
• pp.154-159
• /
• 2019

The glass-ceramic of $Li_2O-Al_2O_3-SiO_2$ system was fabricated by using yttrium oxide and iron oxide that it can reduce the melting temperature and affect the homogenization. Zirconium sulfate was used as a nucleation agent. Calcium phosphate was used to improve the flow the glass so as reduce the viscosity of the glass. The glass-ceramics met a thermal shock test of more than $750^{\circ}C$ and the temperature at which the coefficient of thermal expansion rapidly increased at over $800^{\circ}C$ was shifted by about the above $30^{\circ}C$. Therefore, it is concluded that the glass-ceramic of $Li_2O-Al_2O_3-SiO_2$ system with yttrium oxide and iron oxide was founded to have good melting conditions and excellent thermal expansion resistance at high temperature such as special field for kitchen utensils.