• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.958-964
• /
• 2004

Most of people who are engaged in research and development find it difficult to solve the engineering problems creatively due to the lack of ideas. There are two famous methods for inventive problem solving: ＆apos;Brainstorming＆apos; and ＆apos;TRIZ＆apos;. Brainstorming is the most popular tool until now to find a creative solution and TRIZ is not so popular yet but leads us to a very useful and clear solution. These two methods whose goals are the same usually take quite different routes to the final solution; Those routes have their own unique advantages and disadvantages. In this paper, a creative problem solving method optimized by correlating Brainstorming and TRIZ is proposed. And this method demonstrates how rough initial ideas can be quickly refined and how a problem can be solved correctly.

• TTA Journal
• /
• s.152
• /
• pp.52-53
• /
• 2014

우리 주변에는 세월의 무게를 견디지 못하고 나날이 훼손되어 가는 문화재가 많다. 온도변화에 따른 팽창계수의 차이나 풍화작용 등으로 유물 일부가 떨어져 나가고, 표면의 균열 부분으로 물이 스며들면서 얼어붙었던 부분이 녹아 구조 불균형이 발생하기도 한다. 또 산성비나 대기오염과 같은 환경오염으로 산화 문제가 발생하는가 하면, 비둘기 등 조류 배설물이나 세균류 지의류 이끼류 같은 생물학적 요인으로 파손되기도 한다. 종교나 예술 활동에 따른 인위적인 훼손(반달리즘, Vandalism)도 일어난다. 자연재해로 어쩔 수 없이 사라지는 문화재도 있다. 불에 타 한 줌의 재로 변한 양양의 낙산사가 그 대표적인 예다. 낙산사는 8년 7개월의 복원 작업을 거쳐 되살아났다. 그래도 '낙산사'하면 '불'이 먼저 떠오르는 것은 천년고찰의 화재가 우리에게 상처로 남아 있기 때문이 아닐까. 한편 어렵게 발굴했지만 이미 때를 놓쳐 위기에 처한 소중한 문화재도 있다. 2009년에 발굴된 전북 익산시 미륵사지 석탑의 사리장엄구(사리를 봉안하는 일체의 장치)에 들어 있던 유리병은, 오랜 세월 공기 속의 수분이 풍화작용을 일으켜 두께가 얇아진 데다 0.04mm라는 수백 개의 미세한 조각으로 부서져 복원이 어려운 상태이다. 워낙 두께가 얇아진 탓에 살짝만 압력을 받아도 부서지기 쉬워 접합 자체가 불가능하다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.413-416
• /
• 2004

TOC(total organic carbon)분석은 폐수 및 강수의 오염특성을 평가하기 위한 도구로서 BOD(biochemical oxygen demand), COD(chemical oxygen demand) 와 함께 사용되어 왔다. TOC 측정시간은 10분 정도로 BOD(5～6일), COD(2～3시간)에 비해 아주 짧은 시간에 측정할 수가 있으며, 전처리과정이 단순하고 정확도도 높은 것으로 알려져 있다. 본 연구는 지하수의 잠재오염성을 밝혀내기 위한 도구로 TOC를 활용하여 신뢰성 있는 분석 값을 얻기 위해서 시료의 채취, 보관, 측정까지의 최적 조건을 도출하는데 목적을 두었다. 아울러 시료 채취 후 일정 경과 시간에 따른 TOC의 변화를 관찰하였다. 시료채취 용기, 채취 후 산성화, 보관방법 및 기간에 대한 실험 결과, 대상 변수에 따라서 TOC의 농도변화에 커다란 차이점을 볼 수 있었다. TOC 농도가 낮은 지하수시료의 측정에서는 빛을 차단시킨 불투명 유리병을 사용해야만 하고 채취 즉시 산도를 높여(pH<2)주며 4$^{\circ}C$ 이하에서 보관하여야 한다. 지하수중 TOC 측정시료는 가능한 보관 기간에 있어서 채수 후 24시간 이내에 측정하는 것이 좋으나 1) 본 연구에서는 채취현장과의 거리를 고려하면 현실적으로 불가능하므로 기간에 따른 TOC 변화를 30일까지 측정, 조사하였다.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.05a
• /
• pp.443-452
• /
• 2005

In order to enhance the quality of the glass bottle and to preserve the contents long, corrosion of the bottle surface is often required. The corrosion operation consists of dangerous and harmful tasks using strong acid such as HF. Thus, the corrosion operation should be automatized to improve the worker's safety. The first step of the automation is to develop the bottle gripping system that automatically grips and fixes the bottle during corrosion operations. The gripping system consists of holders, holder plates, air cylinders, and bottle aligning system. This paper shows the gripping system development procedure.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.5
• /
• pp.365-374
• /
• 2005

Most of people who are engaged in research and development find it difficult to solve the engineering problems creatively due to the lack of ideas. TRIZ is one of the emerging problem solving techniques that leads us to a very useful and clear solution. TRIZ consists of several tools such as ideal final result (IFR), physical and technical contradictions, 40 invention principles, resource, effect, etc. However, many designers think that TRIZ is hard to be applied to a design problem since there are several tools in TRIZ. Machine designers may want to see which tool is more effective than others. Thus, this paper provides sample solutions of a design problem: holder design for the bottle etching machine by applying several TRIZ tools. Difficulties in applying TRIZ to a design problem are discussed.

• Korean Journal of Veterinary Research
• /
• v.9 no.1
• /
• pp.23-62
• /
• 1969

Throughout the studies the following experimental results were obtained and are summarized: 1. Multiplication of agents in primary cell cultures of both GF classical and CR-64 acute strain of Marek's disease infected chicken kidneys was accompanied by the formation of distinct transformed cell foci. This characteristic nature of cell transformation was passaged regularly by addition of dispersed cell from infected cultures to normal chicken kidney cell cultures, and also transferred was the nature of cell transformation to normal chick-embryo liver and neuroglial cell cultures. No cytopathic changes were noticed in inoculated chick-embryo fibroblast cultures. 2. The same cytopathic effects were noticed in normal kidney cell monolayers after the inoculation of whole blood and huffy coat cells derived from both forms of Marek's disease infected chickens. In these cases, however, the number of transformed cell foci appearing was far less than that of uninoculated monolayers prepared directly from the kidneys of Marek's disease infected chickens. 3. The change in cell culture IS regarded as a specific cell transformation focus induced by an oncogenic virus rather than it plaque in slowly progressing cytopathic effect by non-oncogenic viruses, and it is quite similar to RSV focus in chick-embryo fibroblasts in many respects. 4. The infective agent (cell transformable) were extremely cell-associated and could not be separated in an infective state from cells under the experimental conditions. 5. The focus assay of these agents was valid as shown by the high degree of linear correlation (r=0.97 and 0.99) between the relative infected cell concentration (in inoculum) and the transformed cell foci counted. 6. No differences were observed between the GF classical strain and the CR-64 acute strain of Marek's disease as far as cell culture behavior. 7. Characterization of the isolates by physical and chemical treatments, development of internuclear inclusions in Infected cells, and nucleic acid typing by differential stainings and cytochemical treatments indicated that the natures of these cell transformation agents closely resemble to those described fer the group B herpes viruses. 8. Susceptible chicks inoculated with infected kidney tissue culture cells developed specific lesions of Marek's disease, and in a case of prolonged observation after inoculation (5 weeks) the birds developed clinical symptoms and gross lesions of Marek's disease. Kidney cell cultures prepared from those inoculated birds and sacrificed showed a superior recovery of cell transformation property by formation of distinct foci. 9. Electron microscopic study of infected kidney culture cells (GF agent) by negative staining technique revealed virus particles furnishing the properties of herpes viruses. The particle was measured about $100m{\mu}$ and, so far, no herpes virus envelop has been seen from these preparations. 10. No relationship of both isolates to avian leukosis/sarcoma group viruses and PPLO was observed.

• Conservation Science in Museum
• /
• v.26
• /
• pp.25-34
• /
• 2021

3D printing technology has been actively applied for the restoration of cultural properties. However, its application to the restoration of glass cultural properties has not yet been reported and thus requires further study. In this study, 3D printing technology was used to restore a defective part of a glass sarira bottle that forms an element of a series of sarira reliquaries commissioned by Yi Seonggye (known as King Taejo after founding the Joseon Dynasty) that was excavated from Geumgangsan Mountain (designated as Treasure No. 1925) and is currently housed at the National Museum of Korea. The defective area was reproduced using 3D printing and the printed reproduction was reproduced again using an epoxy resin. This latter piece was used as the restoration component rather than the 3D printed element. After the completion of the conservation treatment, the materials used for the 3D printing were compared with transparent materials used to restore ceramics to evaluate their usability and stability. A total of five specimens were produced, including from photocurable resin made by a stereo lithography apparatus (SLA), epoxy resin, acrylic resin, and more. They were exposed to UV for 96 hours to test for yellowing. Of the two specimens made of photocurable resins and exposed to UV, one was sprayed with a UV blocking agent but the other was exposed as-is. The UV exposure test showed that the specimen made by the SLA and sprayed with a UV blocking agent and the specimen made of epoxy resin were stable in terms of yellowing with a change in the b-value was less than 1. They are thus considered to be suitable materials for the restoration of glass cultural properties. Such glass cultural properties are often diverse in shape and their restoration can be difficult as they generally consist of a range of complex parts that hamper restoration. In this regard, diverse materials should be considered when selecting materials for the restoration of glass cultural properties.

• Food Science and Preservation
• /
• v.17 no.6
• /
• pp.793-799
• /
• 2010

Kimchi was fermented in permeability-controlled polyethylene containers, in glazed onggi (Korean ethnic earthenware) or glass bottles at $5^{\circ}C$ for 8 weeks. During 4 weeks of storage, kimchi fermented in the permeability-controlled container showed a stable fermentation pattern, in terms of changes in pH and acidity, compared with kimchi fermented in the other containers. With respect to changes in bacterial counts, kimchi fermented in polyethylene containers showed vigorous multiplication of lactic acid bacteria, especially Lactobacillus sp., but slow growth of total aerobic bacteria. The springiness of kimchi fermented in the polyethylene containers was optimal (about 10% more than that of glass bottle-fermented kimchi), and the overall acceptability and hardness of container-fermented kimchi were excellent upon sensory evaluation. The DPPH radical-scavenging activity of kimchi fermented in polyethylene containers was also greater (91%) than that of kimchi fermented in glazed onggi (73%) or glass bottles (63%). The $O_2$ and $CO_2$ permeabilities of the polyethylene containers were higher (458 and $357\;mmol\;h^{-1}\;m^{-2}\;atm^{-1}$, respectively) than were those of the other containers; the permeability ratio was 0.8. Glass bottles showed no permeance. The results indicate that permeability-controlled polyethylene containers may be used for kimchi fermentation.

• The Journal of Engineering Research
• /
• v.4 no.1
• /
• pp.69-85
• /
• 2002

The chemical composition of bottle glass is consisted of Na2O-CaO-SiO2. However the cullet is mornally used in order to decrease the melting tsmperature. This induce the productivity of bottle and decreases the cost. The addition of plate glass decreases the Al2O3 content and in fluence the stone phenomenon and devitification in botle glass. Tus the Feldspar is added in order to increase the Al2O3 content when plate cullet was added in melting. The Tridymite crystal was observed over 7.5% Al2O3 contents, which shown as white crystal in appearance. It is Supposed that the Wollastonite Would be occurred in more over 7.5% Al2O3. This fad id well consised With the Litertctures.

• Journal of Mushroom
• /
• v.17 no.3
• /
• pp.132-135
• /
• 2019

This study aimed to develop a new method of Lentinula edodes cultivation to reduce labor and waste disposal. To identify the optimum container for L. edodes cultivation, box, bottle, and bag containers were assessed for their effects on the cultural characteristics and mushroom yield. Among the three approaches, box-cultivation with 7 kg of substrate had the shortest browning period (42 days) and resulted in the highest mushroom yield (1,253 g). Contrastingly, bottle-cultivation was unsuitable for cultivation due to low production of the fruiting bodies and poor quality. Further studies on the box-cultivation approach will be required for commercial applications of L. edodes.