• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.239-239
• /
• 2018

위성 및 드론을 이용한 원격탐사 기술이 발전하고 다양한 산출물이 나타남에 따라 수자원 및 하천관리 분야에서 원격탐사기술 활용의 폭이 넓어지고 있다. 원격탐사 영상에서 획득할 수 있는 기본적인 가시영상 이외에도 적외영상, 초분광영상, 수위정보, 레이더 반사도 등을 활용하여 하천정보를 추정하려는 시도가 이루어져왔다. 본 연구에서는 원격탐사 영상에서 획득한 하폭을 기반으로 수리학적 하천유량산정을 기법을 적용하기 위해 등류 및 부등류 해석이 가능한 알고리즘과 프로그램을 개발하였다. 등류해석을 위해 GUI 기반 프로그램을 개발하였으며, 특정 하폭에서의 하천유량을 신속하게 계산할 수 있도록 단면 특성분석 모듈과 운동파 방정식 기반의 Manning 유속공식이 적용되도록 구성하였다. 또한, 부등류해석을 위해 스크립트기반의 프로그램을 개발하였다. 부등류 해석 프로그램에는 하천유량을 경계조건으로 수위를 계산하는 일반적인 부등류 수면곡선식의 해석절차를 하폭기반 원격하천 유량 산정 목적에 맞게 재구성하여 원격탐사기술로 획득한 하폭을 경계조건으로 하천 유량을 시산하는 알고리즘을 구현하였다. 본 프로그램을 활용하여 한국건설기술연구원 하천실험센터에서 드론을 이용한 등류/부등류 실험결과를 해석하였으며, 등류 흐름조건에서는 두 가지 해석방법 각각 14.3%, 14.7%의 유사한 평균상대오차를 나타내었고 부등류 흐름조건에서는 등류해석은 62.6%, 부등류해석은 15.8%의 평균상대오차를 나타내었다. 실규모하천에서의 원격하천유량 산정을 위해서는 등류기반 해석방법에 비해 비균일 하천단면에서의 부등류 현상을 모의할 수 있는 하폭기반 부등류 수면곡선의 시산 알고리즘이 유리한 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.255-255
• /
• 2022

안정적이고 효율적인 물 배분과 관리를 위해 하천유량 외에도 하천수 사용량 파악에 대한 관심이 높아짐에 따라 다양한 하천수 사용량 계측방법의 검증 및 표준화로 하천수 사용량 자료의 신뢰도 및 활용성을 개선할 필요가 있다. 다양한 계측방법 중에서도 전자파표면유속계는 비접촉식 유속계이므로 안전적인 측면으로 유리하고 실시간 자료처리 및 계측이 용이하여 활용도가 높다. 본 연구에서는 만경강의 하천수 사용량 파악을 위해 어우보 취수로에 설치된 전자파 표면유속계(RQ-30)를 활용하여 보정계수(K-factor)가 적용된 표면유속을 활용한 유량산정방법, 표면유속과 평균유속의 일정비율로 유량을 산정하는 방법(ISO 748), Chiu의 유속분포법을 활용한 유량산정방법, 지표유속과 인력(人力)에 의한 측정유속과의 관계인 지표유속-평균유속관계곡선식으로 환산된 유량산정 방법등을 비교·검토하고 최적의 유량산정방법을 제시하였다. 향후 전자파표면유속계를 활용한 하천수 사용량의 비교결과를 통하여 더욱 효율적이며 신뢰도 높은 하천수 관리와 실시간 물배분 효과를 기대할 수 있다.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.625-629
• /
• 2022

This study was conducted to compare the internal and external fruit quality of highbush blueberry cultivars introduced in Korea. The fruit of blueberry showed a double S-shaped growth curve, and the fruit weight increased significantly per seed increased by 0.02 g. The sugar content ranged from 9.5 to 14.2°Bx, with a large difference between cultivars. And the free sugar was composed of glucose and fructose as a reducing sugar, and mannitol as a sugar alcohol. The organic acid content was 0.7~1.13%, and citric acid was higher than that of malic acid. Fruit hardness showed a berry characteristic that rapidly declined as the coloring progressed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.7
• /
• pp.729-736
• /
• 2011

The technique for order preference by similarity to ideal solution (TOPSIS) is regarded as a classical method of multiple attribute decision making (MADM), often used to solve various decision-making or selection problems. It is based on the concept that the chosen alternative should have the shortest distance from the positive ideal solution and the farthest distance from the negative ideal solution. The TOPSIS can be applied to a design process for carrying out multi-objective shape optimization wherein the best and worst alternatives are to be decided. In this paper, multi-objective shape optimization using the TOPSIS and Rational Bezier curve was applied to the funnel of a cathode-ray tube (CRT). In order to minimize the weight and first principal stress, a new multi-objective shape optimization methodology is proposed, wherein the relative-closeness coefficients of the TOPSIS are defined as the performance indices of a multi-objective function and evaluated by response surface models. This methodology enables the designer to decide on the best solution from a number of design specification groups by examining the various conflicts between the weight and the first principal stress.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.179-184
• /
• 2014

The discharge characteristics of an open dielectric structure were investigated, especially such as a firing voltage and related wall voltage, compared with conventional panel structure based on the Vt close curve measurement in AC plasma display panel. While the front panel of the conventional structure in AC plasma display panel was composed of the glass, electrodes, and dielectric, the open dielectric structure could easily produce the discharge between the scan and the sustain electrodes by erasing the dielectric layer between two electrodes. As the open dielectric structure differ from the conventional structure, various problems were produced when driving with the conventional driving waveform. Especially, due to the changes in the discharge firing characteristics of the open dielectric structure between the scan and the sustain electrodes on the front panel, the conventional reset waveform including the address waveform needed to be modified. In this study, the Vt close curves were measured to compare the discharge firing voltages on three electrodes in the conventional and open dielectric structure and based on the Vt close curve analysis, the modified driving waveform suitable for the open dielectric structure was proposed.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.457-467
• /
• 2022

Electron bombardment to silicate glass during electron probe microanalysis (EPMA) causes outward migration of Na from the excitation volume and subsequent decrease in the measured X-ray count rates of Na. To acquire precise Na₂O content of silicate glass, one should use proper analytical technique to avoid or minimize Na migration effect or should correct for decreases in the measured Na X-ray counts. In this study, we analyzed 8 silicate glass standard samples using automated Time Dependent Intensity (TDI) correction method of Probe for EPMA software that can calculate zero-time intercept by extrapolating X-ray count changes over analysis time. We evaluated an accuracy of TDI correction for Na measurements of silicate glasses with EPMA at 15 kV acceleration voltage and 20 nA probe current electron beam, which is commonly utilized analytical condition for geological samples. Results show that Na loss can be avoided with 20 ㎛-sized large beam (<0.1 nA/㎛²), thus silicate glasses can be analyzed without TDI correction. When the beam size is smaller than 10 ㎛, Na loss results in large relative errors up to -55% of Na₂O values without correction. By applying TDI corrections, we can acquire Na₂O values close to the reference values with relative errors of ~ ±10%. Use of weighted linear-fit can reduce relative errors down to ±6%. Thus, quantitative analysis of silicate glasses with EPMA is required for TDI correction for alkali elements such as Na and K.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.518-523
• /
• 1998

The fracture toughness and hardness of 62 %$SiO_2-19%ZrO_2-9%Na_2O-10%B_2O_3$(wt%) glass ceramics system were investigated. As a result of DTA study to find crystallization temperature, an exothermic peak near $820^{\circ}C$ was observed. The optimum nucleation temperature and the optimum crystal growth temperature were determined by XRD and SEM analysis, and were approximately $650^{\circ}C$, $840^{\circ}C$ respectively. The fracture toughness of this zirconia glass ceramics was determined by Vickers Indentation Method. The hardness value was not changed with increasing of the heat treatment temperature, but fracture toughness value was increased up to $1.8 MPa{\cdot}m^{1/2}$ at $840^{\circ}C$, with increasing of heat treatment temperature.

• Journal of the Korea Concrete Institute
• /
• v.15 no.1
• /
• pp.110-116
• /
• 2003

Recently, as concrete structure becomes high rise and large scaled tendency, demands for high performance concrete such as high strength, high fluidity and high durability has been increased. Even though high performance concrete performs high strength, workability and durability, compared to with those of normal concrete, it is more brittle than normal concrete. Accordingly, this paper is intended to improve toughness and compressive strength through investigating the mechanical properties of the high performance concrete confined with metal lath, glass fiber and carbon fiber laterally in the case of 30% and 40% of W/B. According to the results, the compressive strength increases in order of metal lath, carbon fiber and glass fiber. Considering strain-stress curve with the kinds of material for lateral confinement, while brittleness failure occurs in plain concrete just after maximum load, it is improved in some degree in confined concrete due to increase of the strain by increase of toughness. Elastic modulus increases slightly in case of confined concrete, like the compressing strength.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.2
• /
• pp.189-196
• /
• 1995

Abstract The short range structure of pure $TeO_2$ glass was studied by neutron diffraction. In order to decide the values of $Te{\cdot}O$ bond length ($d_{Te-O}$) and the coordination number $(N_{Te-O})$ of oxygen atoms surrounding a Te atom, the first peak of the $Q_{max}$ = 20, 23, 25, 28 and 30 in the highly resolved RDF curves was deconvoluted by the least - squares method under the assumption that both of the pair distribution functions have a Gaussian form On the basis of these results, it is found that pure $TeO_2$ glass consists of $TeO_4$ structural units, in which Te atoms are coordinated by four oxygens and each two oxygen atoms are bonded to a Te atom with the average bond length of 1.916 $\AA$ and 2.123 $\AA$, respectively.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.99-107
• /
• 1984

Naked barley flour(Baekdong cultivar) was examined with respect to its pasting properties by means of Brabender amylograph after adding barley lipids, fatty acids, vegetable oils and emulsifiers at 1% level. Amylogram of barley flour showed a similar gelatinization temperature but higher paste viscosities at all reference points as compared with wheat flour. Barley flour showed lower amylograph curves by defatting with n-hexane, namely reductions in initial gelatinization point, maximum viscosity and setback value. But re-addition of n-hexane extract to the defatted flour essentially reproduced the curve obtained in the undefatted flour. Addition of polar and nonpolar lipids exhibited different effects on the pasting properties of barley flour. Polar lipids generally increased maximum viscosity a little while non-polar lipids increased the maximum viscosity substantially. Addition of increasing amounts of nonpolar lipids was found to progressively increase the maximum viscosity. Addition of fatty acids increaed th maximum viscosity and delayed the peak time. The maximum viscosity of defatted barley flour impregnated with unsaturated fatty acids was higher than that of defatted barley flour impregnated with saturated fatty acids Increasing amounts of linoleic acid were fount to progressively increase the maximum viscosity and to delay the peak time of defatted barley flour. Addition of six vegetable oils lowered the gelatinization temperature and rasied the maximum viscosity and temperature at maximum viscosity. Addition of increasing amount of peanut oil was found to decrease the maximum viscosity. The effect of emulsifiers was greater in undefatted flour than in defatted flour. The maximum viscosity of defatted flour was slightly affected by Methocel 50, Methocel 1500 and Emulthin, and substantially increased by Methocel 4000, sodium polyacrylate and calcium stearyl lactylate.