• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.258-265
• /
• 2014

By replacing the previous metal connector on the joints of timber structure, the GFRP reinforced laminated wooden pin was produced using a wooden material and Glass fiber reinforced plastic(GFRP) composite laminate. In addition, using the reinforced wooden pin, the tensile type shear strength test was conducted. Based on the result of the bending strength test of the reinforced laminated wooden pin according to the GFRP arrangement, a specimen(Type-A) with a single insertion of GFRP for each layer have shown the most favorable performance. Also, it was verified that densified specimen hot pressed for an hour at the temperature of $150^{\circ}C$ and with the oppression pressure $1.96N/mm^2$ have shown the improved performance of 1.57 times than the specimen without the densification. And in the bending strength test considering the load direction, edgewise have shown a higher performance of 3.51 times than the flatwise. A shear strength test was conducted using the Type-A reinforced laminated wooden pin which have shown a moderate performance on the test. Based on the test conducted by differentiating the type of the joint plate and the connector, compared to the specimen(Type-DS) applied with the drift pin and steel plate, the specimen( Type-WL) applied with the GFRP reinforced laminated wooden pin and GFRP reinforced wooden laminated plate have shown 1.12 times higher shear strength and also have shown an excellent toughness even after the maximum load.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.04a
• /
• pp.48-48
• /
• 2000

효율적인 wet-end시스템의 적용으로 중성 초지시스템의 이점을 최대한 구현하고 이에 따른 초지계의 안정성 및 원가절감 등을 얻기 위해서는 중성 초지 시스템에서 사용되는 사 이즈제 및 사이징 공정에 대한 연구가 매우 중요하다. 현재 중성 사이즈제로는 AKD와 A ASA가 가장 널리 사용되고 있는데, 유럽에서는 주로 AKD가 쓰이고 있으며, 미국에서는 A ASA가 50%정도 사용되고 있다 .. AKD에 비해서 ASA는 사이즈도의 발현이 매우 빨라 사이 즈 프레스에서 사이즈도가 발현되므로 사이즈 프레스에서의 픽엽 조절 및 지절감소에 유리 한 장점을 가지고 있다. 하지만 ASA는 AKD에 비해 반웅성 높아 습부에서의 가수분해되어 초지 조업성을 악화시키는 문제점을 지니고 있다. 이러한 문제를 극복하기 위해서는 ASA 유화액의 정착성을 개선시키기 위한 연구가 시급히 요청되고 있으며 여기에는 ASA의 유화 에 사용되는 양성전분의 최적화가 가장 핵심적인 기술로 평가된다. 현재 ASA용 유화제로는 양성전분이 가장 많이 사용되고 있다. ASA 에멀션 제조에 있 어서 양성전분의 역할은 음전하를 가지고 있는 ASA 입자에 홉착되여 양전하를 부여함으로 써 콜로이드 업자의 안정성을 부여할 뿐만 아니라 섬유와의 정전기적 인력을 유도하여 정착 을 증진시키는 효과를 나타낸다. ASA 유화용으로 쓰이는 양성전분 중에서는 감자전분이 가 장 효과적인 것으로 알려져 있으며 옥수수나 타피오카 둥도 쓰이고 있다. 그러나 국내의 경 우 감자전분은 옥수수전분보다 가격이 비싸다는 단점이 있으므로 저렴한 옥수수 전분을 이 용하여 ASA 유화용 변성전분의 개발이 국내 제지산업의 경쟁력 강화를 위해 시급히 요망 되고 있다. 본 연구의 목표는 옥수수 전분을 이용한 ASA용 유화안정제를 개발하고 그 효과를 극대 화시킬 수 있는 적용기술을 확립하는데 있다. 옥수수전분을 이용한 ASA 유화용 변성전분은 외국에서 소개된 바가 있기는 하지만 사이즈도 발현이 감자전분의 절반 수준으로 효과적이 지 못한 것이 문제점으로 지적된 바 있다. A ASA 유화용 전분으로는 감자전분과 옥수수전분으로 제조된 외국산 기존 제품과 본 연 구를 통해 개발된 옥수수 전분을 이용하였다. 먼저 실험실적으로 최적의 ASA 에멸션의 유 화가 가능하도록 유화조건을 설정하여 유화액의 입도가 1µm 정도가 되도록 하였다. 이들 A ASA 사이즈제를 Hw. Sw-BKP로 조성된 지료에 투입하여 수초한 후 Hercules 사이즈도 측정기를 이용하여 수초지의 사이즈도를 측정하였다. 또 사이정 효과를 극대화시키기 위한 방안을 모색하기 위해 ASA 에말션의 입도, 제타전위, 탁도 등의 평가를 병행 실시하였다. 실험 결과 기존의 방법으로 유화한 경우 수입감자양성전분이 가장 높은 사이즈도를 보였 다. 그러나, 적절한 전분변성법과 유화조건을 개선함으로써 옥수수전분을 이용하여 수입 감 자전분이나 수입 옥수수전분보다 더 우수한 ASA 사이정 효과를 나타내는 양성전분이 개발 될 수 있음을 확인하였다.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.169-177
• /
• 2018

Glass fiber reinforced polyester (GFRP) composites are widely used as structural materials in harsh environment such as underground pipes, tanks and boat hulls, which requires long-term water resistance. Especially, these materials might be damaged due to delamination between gelcoat and composites through an osmotic process when they are immersed in water. In this study, GFRP laminates were prepared by surface treatment of UPE (unsaturated polyester) gelcoat by vacuum infusion process to improve the durability of composite materials used in underground pipes. The composite surface coated with gelcoat was examined for surface defects, cracking, and hardness change characteristics in water-immersion environments (different temperatures of $60^{\circ}C$, $75^{\circ}C$, and $85^{\circ}C$). The penetration depth of cracks was investigated by micro CT imaging according to water immersion temperature. It was confirmed that cracks developed into the composites material at $75^{\circ}C$ and $85^{\circ}C$ causing loss of durability of the materials. The point at which the initial crack initiated was defined as the failure time and the life expectancy at $23^{\circ}C$ was measured using the Arrhenius equation. The results from this study is expected to be applied to reliability evaluation of various industrial fields where gelcoat is applied such as civil engineering, construction, and marine industry.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.11
• /
• pp.51-59
• /
• 2018

The Multi-Mission Unmanned Surface Vehicle(MMUSV), which is manufactured using glass Fiber Reinforced Plastic(FRP) material, is designed to perform a surveillance and reconnaissance on the sea. Various navigation sensors, such as RADAR, RIDAR, camera, are mounted on a mast to perform an autonomous navigation. And a dummy gun is mounted on the deck of the MMUSV for a target tracking and disposal. It is necessary to analyze a strength for structures mounted on the deck because the MMUSV performs missions under a severe sea state. In this paper, a strength analysis of the mast structure is performed on static loads and lateral external loads to verify an adequacy of the designed mast through a series of simulations. Based on the results of captive model tests, a strength analysis for a heave motion of the mast structure is conducted using a simulation tool. Also a simulation and fatigue test for a mounting part between the MMUSV and the dummy gun are performed using a specimen. The simulation and test results are represented that a structure of the mast and mounting part of the dummy gun are appropriately designed.he impact amount are performed through simulation and experiments.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.2
• /
• pp.15-23
• /
• 2019

High temperature superconducting (HTS) generators for wind power systems are attractively researched with the advantages of high efficiency and smaller size compared with conventional generator. However, the HTS generators have high Lorentz force problem, which acts on HTS field coils due to their high current density and magnetic field. This paper deals with characteristic analysis of the modularized HTS field coil for a 750 kW superconducting wind power generator according to field coil structure. The modularized HTS field coil structure was designed based on the electromagnetic and mechanical analysis results obtained using a 3D finite element method. The electromagnetic force of the module coil was also analyzed. As a result, the perpendicular and maximum magnetic fields of the HTS coils were 2.5 T and 3.9 T, respectively. The maximum stress of the supports was less than the allowable stress of the glass-fiber reinforced plastic material, and displacement was within the acceptable range. The design specifications and the results of the HTS module coil structure can be effectively utilized to develop large-scale superconducting wind power generators.

• Food Science and Preservation
• /
• v.15 no.3
• /
• pp.477-482
• /
• 2008

The quality characteristics of Goami by-product under the mixed enzyme treatment condition of $\alpha$-amylase and cellulase have been compared, and found the highest amount of soluble solids and reducing sugars at the $\alpha$-amylase treated group (A), and the contents revealed to show gradual decrease with the increase of cellulase content. The amounts of total dietary fiber and total sugars did not show large difference by both of enzyme concentration. The result of sugar analysis revealed the presence of all $G{\sim}G5$ in all treatment groups, and the content of malto-oligosaccharide recorded the highest content of 2,200 mg% at the $\alpha$-amylase treatment group (A). When the quality characteristic of the hydrolyzed powders manufactured by the optimum hydrolysis condition was compared, no significant color difference was found between samples. Among the contents of dietary fibers, insoluble dietary fiber was found to present in the lowest content of 6.95% at the Goami flour (GF) and the Goami by-product powder (GBPP) and Goami by-product hydrolysate powder (GBPHP) resulted the similar content around 14% and the highest soluble dietary fibers content was found in Goami by-product hydrolysate powder (GBPHP), which was followed by in the order of Goami by-product powder (GBPP) and Goami flour (GF), but the content variation was not large. The free amino acid was found to be highest in Goami by-product hydrolysate powder (GBPHP) followed by in the order of Goami by-product powder (GBPP) and Goami flour (GF). In the sugar analysis, the Goami by-product hydrolysate powder (GBPHP) was found with all $G{\sim}G5$ sugars by showing the highest amount of 1,800 mg% At the Goami by-product powder (GBPP), $G{\sim}G2$ sugars were detected with about 66 mg% and malto-oligosaccharides were not detected at the Goami flour (GF). Based upon the results, the functionality of Goami by-product hydrolysate powder (GBPHP) was found to be enforced compared to Goami flour (GF) and Goami by-product powder (GBPP), which allow us to expect it to be used as the various rice processing food source.

• Journal of Environmental Impact Assessment
• /
• v.32 no.3
• /
• pp.166-175
• /
• 2023

This study aims to identify the cause of the red-water occurrence (the phenomenon of water being red) that occurs at some points and sections of rivers in Yongin City. As a result of conducting a preliminary investigation, total three sites were selected as the investigation point as it was found that the red-water occurrence continued. As a result of the investigation, it is judged that the cause of the red-water in Yongin-city river is due to the soil color and iron content of the region. JPS, SBS, and JJS sites all showed that the color of soil is mainly consist of reddish brown and red-yellow. The average Fe concentration was 13.75 mg/L, 10.85 mg/L, and 1.31 mg/L, for each sites, and considering that the Fe concentration in general river water was less than 0.5 mg/L, it was confirmed that the concentration was quite high. At the JPS and JJS points, the red-water occurrence occurred mainly in stagnant places, which is believed to be strengthened by the reaction of organic and microorganisms. In the case of SBS, the wateris red, but as a result of observing the actual color, it is judged that the iron component deposited in the pipe causes an optical illusion with a deep red color. In addition, it is believed that the iron concentration can be reduced to the general river water concentration range by removing the particulate iron component through a decrease of more than 95% as a result of filtering with glass fiber filter with particulate iron. As a result of this study, it is necessary to manage the river to maintain the flow, and it is believed that the occurrence of red-water at the survey point can be alleviated through uptake action through planting and agglomeration precipitation and agglomeration filtration methods for particulate iron treatment.