• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1-6
• /
• 2004

Lots of researches were gone already about grooving corrosion mechanism of ERW carbon steel pipe. But there is seldom study for water hammer happened by fluid and acceleration of corrosion rate by incresed flow velocity. Therefore, in this study carried out the analysis based on hydrodynamic and fracture mechanics. Analyzed stress that act on a pipe using ANSYS as a program, and also FLUENT and STAR-CD were used for flow phenomenon confirmation. As the result, fatigue failure is happened by water hammer and corrosion rate was increased because of turbulent flow.

• Journal of Welding and Joining
• /
• 제8권1호
• /
• pp.62-69
• /
• 1990

Being focused on the recent studies that the fatigue strength of resistance spot weldmentes can be improved by using ellipsoidal weld nuggets, the voltage and temperature distribution in resistance spot weldments were simulated for the various rectangular electrodes which had the different aspect ratio of the contact area. Because the electrode shape was not axi-symmetric, the solution domain for simulation should be three dimensional. A series of experiments were carred out to verify the analytically obtained temperature distribution in the weldment. From the calculational and experimental results, it could be revealed that the nugget took the form of ellipsoid, while both results showed a considerable discrepancy for the high aspect ratio.

• 설비공학논문집
• /
• 제23권1호
• /
• pp.23-31
• /
• 2011

An analysis has been conducted of the flow characteristics and pumping performance of a thermopneumatic micropump with electrically conducting fluid. In the present study, considered is a thermopneumatic micropump for electrically conducting fluids with electromagnetic resistance alternately exerted at the inlet and outlet by alternately applied magnetic fields. A model of Prescribed Deformation is used for the motion of the membrane. Here, the pumping performance of the micropump and flow characteristics of the electrically conducting fluid are investigated in the range of Hartmann number less than 30. The current numerical study shows that the net flow rate through the micropump is almost proportional to the strength of the applied magnetic field.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.29-34
• /
• 2000

This paper describes a numerical study to make clear the characteristics of flow around a high speed catamaran hull advancing on calm water. The simulation is carried out at Froude number of 0.5 with a separation to length rations of 0.2 to 0.5. To simulate the flows, the Navier-Stokes solver is employed in which the free surface condition is included. Computations are performed in a rectangular grid system based grid system based on the Marker & Cell method. For the validation, the computation results are compared with the experiments.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.195-198
• /
• 2006

The possibility of skin friction reduction in laminar channel flow is investigated when the flow is subjected to stationary distributed surface blowing and suction. Blowing and suction provided at the channel walls is steady in time but varies as a sine function along the streamwise direction. The skin friction changes depending on the wavelength and amplitude of the actuation. Especially, the skin friction is reduced below that of fully developed laminar flow as the wavelength decreases and amplitude increases. The optimal wavelength of producing minimum skin friction is $\pi/2{\delta}$, where $\delta$ is the channel half-height It is observed that the distributed blowing and suction induces strong negative Reynolds shear stress in the near-wall region at the end of the suction part.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1647-1656
• /
• 1998

The drag reduction is the phenomenon that occurs only when the shear stress from the wall of pipe is beyond the critical point. The drag reduction increase as the molecular weight, concentration of the polymer and Reynolds number increase, but it is limited by Virk's maximum drag reduction asymptote. Because of the strong shear force for the polymer on the turbulent flow, the molecular weight and the drag reduction do not decrease. Such mechanical degradation of the polymer occurs in all polymer solvent systems. This paper is to identify and develop high performance polymer additives for fluid transportations with the benefits of turbulent drag reduction. In addition, drag reduction in vertical flow by measuring the pressure drop and local void fraction on vertical-up flow of close system is evaluated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.508-513
• /
• 2000

An experimental investigation has been carried out for two circular cylinders having different groove configurations(U and V-shape). The results were compared with those for the smooth circular cylinder. The drag force, mean velocity and turbulent intensity profiles of wake behind the cylinders were measured with varying the Reynolds number $Re=8000{\sim}14,000$ based on the cylinder diameter. As a results, the U-groove circular cylinder was found to be most effective riblet shape with reducing the drag up to 21%. As the Reynolds number increases, the vortex shedding frequency of the grooved cylinders becomes a little larger, compared to the smooth cylinder. The flow visualization using the smoke-wire technique was also carried out to see the flow structure qualitatively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.52-54
• /
• 2002

최근 초고압 전력기기에 대한 많은 연구가 활발히 진행되고 있음에도 불구하고 통전용량에 크게 영향을 미치는 열해석에 대한 연구가 많이 부족한 실정이다. 본 논문에서는 초고압전력기기인 GIS(Gas Insulated Switchgear)의 모선에 대한 열해석을 다루었다. 해석방법은 유한요소법을 이용하여 온도상승을 예측하였다. 유한요소법은 3각형 등의 임의의 형상을 요소로서 채용할 수 있으므로 3상 모선과 같이 복잡한 형상도 표현할 수 있다. 열전달계수는 형상, 유동조건, 유체의 종류를 고려한 상관식을 이용하여 해석적으로 정확히 계산하였다. 열해석에 있어 자계해석을 통한 도체 및 탱크의 손실값 산정이 선행되어야 하는데, 이 손실값이 온도상승의 원인이 되므로 정확히 계산하여야 한다. 손실의 원인이 되는 도체 및 탱크의 저항은 온도가 상승함에 따라 비선형으로 변화하는데, 이것을 고려하여 반복적으로 계산함으로서 해석의 정확성을 높이고자 하였다. 실제 모델에 대한 온도상승 실험치와 본 논문에서 제시한 방법으로 해석한 계산치와의 비교를 통해 타당성을 입증하였다.

• 대한조선학회지
• /
• 제30권2호
• /
• pp.8-10
• /
• 1993

선박에너지 개발을 위한 미래의 유력한 추진체로서 초전도 자력장을 이용한 선박을 들 수 있는데 이와 같은 경우에는 실험을 하기에는 비용이 엄청나게 소요되고 설비 자체가 복잡하기 때문에 CFD를 이용해서 초기 계\ulcorner을 구상하고 선체 주위의 유동장의 제어 및 기초 설계를 하여야 할 것이다. CFD계산을 통해 일반적으로 얻을 수 있는 것은 -압력 분포 -자유 표면 파고 -유속 분포 -유선 추적 -선체 표면의 응력 분포 -한계 유선 분포 -선미 와류 생성 과정 -선체 저항 계산 등으로 선형 개발에 필요한 기본 자료들이다. 여기서 CFD의 유용가치를 강조할 수 있는데 위의 많은 데이터를 실험을 통해서 얻으려면 막대한 경비와 노력이 투입되어야 한다. 또한 현재의 실험 시설로는 정량적으로 측정할 수 없는 부분도 일부 있다. CFD의 경우는 그러한 어려움은 없으나 꼭 필요한 것이 수치계산의 검증이다. 계산 결과의 유효성(validity)을 검증해야 한다는 의미이다. 계산은 실험을 통하여 반드시 비교 검토가 이루어져야 하며 이의 수단으로 선박 분 야에서는 Wigley 모형이나 Series 60와 같은 것들이 사용되고 잇다. 당 연구소의 저항추진연구 실에서는 CFD의 연구가 수년 전부터 소수의 인원을 중심으로 이루어져 왔다. 이와 관련하여 대표적인 몇 가지만 소개하고자 한다.

• 설비공학논문집
• /
• 제7권3호
• /
• pp.359-365
• /
• 1995

The drag reduction phenomenon with an additives of surfactant(STAC, stearlytrimethyl ammonium chloride) and polymer(PEO, polyethlene oxide) was investigated in fully developed turbulent pipe and channel flows at various low Reynolds numbers as well as very low additives concentration. A maximum of 70% drag reduction compared with plain water flow was found. This maximum drag reduction percentage obtained with surfactant solution was slightly higher than that of the Virk's asymptote in polymer solution.