• Water for future
• /
• v.23 no.1
• /
• pp.119-127
• /
• 1990

The concentration of cohesive suspended sediment is determined by the circulation of water and the material dispersion. The equations of the two-dimensional, depth-integrated dispersive transport are the Reynolds equation, continuity equation, and advection-dispersion equation based on the Fick's law. A finite difference method has been applied to two models of circulation and dispersion transport. The circulation model is solved by the explicit scheme and the dispersion transport model is solved by multi-operational scheme. It is investigated wheter advective terms are included when the equation of circulation is applied to the model. For advection-dispersion equation, it was also investigated about variations of suspended sediment concentration with respect to the critical shear stresses.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.11c
• /
• pp.169-178
• /
• 1999

본 논문에서는 실내에서 실시한 Filtration실험을 통하여 지하수 흐름하에서 이탈한 풍화 잔류토의 세립자가 흙-토목섬유 복합체를 통과하면서 발생하는 이동 (Transportation), 퇴적 (Deposition), 그리고 폐색 (Clogging)되는 과정을 분석하였다. 본 연구에서는 한국의 풍화 잔류토에 적합한 토목섬유 배수재의 새로운 설계기준을 제시함으로써 풍화 잔류토상에 축조되는 터널 구조물 시공시 광범위하게 사용되고 있는 토목섬유재인 부직포의 투수 및 배수특성과 세립토사에 의한 폐색 (Clogging)영향을 분석할 수 있게 되었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.9
• /
• pp.879-888
• /
• 2009

Unsteady three-dimensional reacting flowfield generated by transverse hydrogen injection into a supersonic mainstream is numerically investigated using DES and finite-rate chemistry model. Comparisons are made with experimental results to investigate the turbulent reacting flow physics. The numerical OH distribution describes well the experimental OH-PLIF result, while the numerical ignition delay time shows some disparity due to the restricted available experimental data. The intermittency phenomena are identified by the comparative analysis between RANS and DES. Those effects are also quantified by the temperature distributions along streamlines and superimposed OH mass fraction along with time.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.91-99
• /
• 2024

Piping systems are crucial facilities used in various industries, particularly in areas related to daily life and safety. Piping systems are fixed to the main structures of buildings and facilities but do not support external loads and serve as non-structural elements performing specific functions. Piping systems are affected by relative displacements owing to phase differences arising from different behaviors between two support points under seismic loads; this can cause damage owing to the displacement-dominant cyclic behavior. Fittings and joints in piping systems are representative elements that are vulnerable to seismic loads. To evaluate the seismic performance and limit states of fittings and joints in piping systems, a high-stroke actuator is required to simulate relative displacements. However, this is challenging because only few facilities can conduct these experiments. Therefore, element-level experiments are required to evaluate the seismic performance and limit states of piping systems connected by fittings and joints. This study proposed a method to evaluate the seismic performance of an elbow specimen that includes fittings and joints that are vulnerable to seismic loads in vertical piping systems. The elbow specimen was created by connecting straight pipes to both ends of a 90° pipe elbow using flexible groove joints. The seismic performance of the elbow specimen was evaluated using a cyclic loading protocol based on deformation angles. To determine the margin of the evaluated seismic performance, the limit states were assessed by applying cyclic loading with a constant amplitude.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.308-322
• /
• 1991

A set of experiments of Counter-Current Flow Limit(CCFL or Flooding) was performed to improve the drawbacks of Wallis' Correlation which neglects the effects of channel size, channel length, injection method and the boundary conditions at the inlet of liquid and gas phase. In these experiments using water and air, the followings were found ; (i) The effects of channel size and length were quite significant. In large tubes(D>20mm), the flooding front occurred at the bottom of the channel and when the gas flow increased the front moved upward ; however, in small tubes(D<20mm), there were no upward movement of flooding front and the flooding just occurred at the liquid inlet. (ii) The effect of water inlet device was not as significant as that of channel length though the inlet boundary conditions could affect the flow development and flooding afterward. (iii) Once the flooding front reached the inlet of water injection device, an newly reduced flow condition was set up and resulted in another flooding corresponding to the new condition.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.6
• /
• pp.405-411
• /
• 2013

A sediment transport calculation considering cohesive force is proposed to deal with the transport phenomena of cohesive sediment. In the proposed calculation, each sand particle is assumed to be surrounded by a thin layer of mud. The critical Shields parameter and bed-load sediment transport rate are modified to include the cohesive force acting on the sand particle. The proposed calculation is incorporated into a two-way coupled fluid-structure-sediment interaction model, and applied to wave-induced topographic change of artificial shallows. Numerical results show that an increase in the content ratio of the mud, cohesive resistance force per unit surface area and water content cause increases in the critical Shields parameter and decreases in the bed-load sediment transport rate, reducing the topographic change of the shallow without changing its trend. This suggests that mixing mud in the pores of the sand particles can reduce the topographic change of shallows.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.2
• /
• pp.10-16
• /
• 2003

The unsteady supersonic flow over tandem cavities has been analyzed by the integration of Navier-Stokes equations with the k-$\varepsilon$ turbulence model. The unsteady flow is characterized by the periodicity due to the mutual relation between the shear layer and the internal flow in cavities. The upwind TVD scheme based on the flux vector split with the van Leer limiters is used. The results show the principal frequency is very reasonable. The principal frequency of the rear cavity due to the front cavity has been analyzed by the combination of the several aspect ratios of cavities. In the case of the front cavity of low aspect ratio, the frequencies of tandem cavities are almost same, because two shear layers developed from each cavity are mixed and developed to one shear layer. However, in the case of the front cavity of high aspect ratio, the characteristis of frequency are very different, because the second shear layer is developed in the diffused first shear layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.382.2-382.2
• /
• 2016

현재 전 세계적으로 에너지 소비가 급격히 증가하고 있다. 하지만 급격한 에너지 소비에 따른 자원 및 에너지 공급의 불확실성은 점점 높아지고 있다. 특히, 우리나라는 공급 에너지의 96.4%를 해외 수입에 의존하고 있기 때문에 에너지 안보에 매우 취약한 구조를 갖고 있다. 그리고 열전달 시스템에서 임계 열유속은 열전달 시스템의 한계를 나타낸다. 따라서 임계 열유속의 향상은 열전달 시스템의 안전성의 향상을 위한 필수적인 요소이다. 이에 따라 다양한 산업에서 열전달 시스템을 통하여 막대한 양의 에너지가 소비됨에 따라 우수한 열전달 특성을 가진 나노유체를 사용하여 열전달 시스템의 효율 및 안정성을 높이고자 하는 많은 연구가 진행되고 있다. 따라서 본 연구에서는 유동 비등에서 그래핀 나노 유체 사용에 따른 열전달 특성을 분석하였다. 유동 비등에서 0.01 vol%의 산화 처리된 그래핀 나노유체를 사용하였을 경우 유속이 증가함에 따라 임계 열유속은 증가하였으며 유속이 증가함에 따라 비등 열전달 계수도 증가함을 확인하였다. 그리고 임계 열유속은 순수 물보다 최대 66.32% 증가하였으며, 비등 열전달 계수는 풀비등에서 보다 최대 28.14% 증가함을 확인하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.54-54
• /
• 2004

집속체의 드래프트 공정(롤러 인발 공정)의 경우, 선밀도의 변동성(irregularity)은 드래프트 비, 롤러 간격 등의 공정조건과 집속체, 응집도, 엉킴 등으로 대표되는 openness 애 큰 영향을 받는다. 본 연구에서는 유동계 내에서의 집속체 동적거동을 묘사하는 기본 방정식을 바탕으로 openness 와 직접적인 관련이 있는 구성모델의 주요 파라메타($\mu$)의 변동을 auto-covariance function 으로 묘사되는 확률과정 신호(stochastic signal)로 생각하여, 이 신호를 생성하고, 모델 시뮬레이션을 통하여 출력 집속체의 선밀도 변동을 살펴 보았으며, 출력 집속체의 선밀도가 거의 일정하게 유지되는 출력구간 근처에서 선밀도 불균제 특성을 해석하였다.(중략)

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.506-511
• /
• 2006

빌딩 원격 통합관리는 광역에 걸쳐 분포되어 있는 빌딩의 자동화 시스템의 통합을 의미하며, 이를 통해 작업의 일관성을 유지하며 생산성을 향상시키고 각각의 설비에 대한 정보를 일원화할 수 있다. 빌딩 자동화 시스템의 통합을 위해서 프로토콜 개방이 중요하지만, 국내의 자동화 시스템 제작업체에서는 프로토콜 개방을 하지 않고 있다. 또한 통신 프로토콜이 분석되었다고 하더라도 연결 가능한 Device에 따라 수집할 수 있는 데이터의 종류에는 한계가 있을 수 있다. 본 논문에서는 빌딩 원격 통합관리를 구현할 수 있는 유동 IP를 이용한 빌딩 원격 통합관리 시스템의 구축 방안을 제시하고, 관리비를 줄일 수 있는 통합 운영 방법과 기업용 전용회선대비 유동 IP를 이용한 ADSL(Asymmetric Digital Subscriber Line)의 통신비를 평가하였다.