• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.1
• /
• pp.53-59
• /
• 2010

In this paper, we propose a novel chaotic micromixer of which mixing mechanism is based upon magnetohydrodynamic (MHD) multi-vortical flow generation in a simple straight microchannel. In the microchannel of the micromixer has electrodes patterned on two side walls and bottom wall. Lorentz forces are variously induced by changing applied voltages at the patterned electrodes in order to pump and mix conductive fluids in the microchannel. Three-dimensional computational fluid dynamics simulations were conduced to characterize mixing behaviors inside the MHD micromixer. The mixing efficiencies were also evaluated for the various flow conditions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.468-474
• /
• 2011

The flow field around baffle located sudden expansion and contraction channel was measured by PIV method and the effect according to height change of baffle built in the flow field was evaluated. The inlet flow velocity and the baffle height influence mutually to the size and flow pattern of the recycle flow of the back of the baffle and the size of the area of the water power jump passing the upper part of the baffle. In case of Reynolds number $Re=4{\times}10^3$, the critical value of baffle height is estimated around h/H=1.6 and there was a decreasing tendency as the inlet flow velocity was increased.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.75-83
• /
• 2005

A steady transonic dilute premixed combustion in a diverging channel is investigated by using asymptotic analysis. This model explores the nonlinear interactions between the near-sonic speed of the flow, the small changes in geometry from a straight channel, and the small heat release due to the one-step first-order Arrhenius chemical reaction. The reactive flow is described by a nonhomogeneous transonic small-disturbance (TSD) equation coupled with an ordinary differential equation for the calculation of the reactant mass fraction in the combustible gas. Also the asymptotic analysis reveals the similarity parameters that govern the reacting flow problem. The results show the complicated nonlinear interaction between the convection, reaction, and geometry effects and its effect on the flow behavior.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.625-630
• /
• 2014

연료전지의 성능을 결정짓는 가장 중요한 변수 중의 하나는 각 스택의 채널에 얼마나 균일하게 연료를 공급할 수 있느냐이다. 본 연구에서는 네 가지의 모델을 사용하여 연료전지 매니폴드 형상에 따른 최적 설계를 수행하였다. 위 네 가지 모델은 각기 다른 기하학적 형상을 가지며 Edison CFD를 이용하여 형상 내의 유동을 비교하였다. 초기 모델에서는, 입구부에서 매니폴드로 유입되는 유동의 확산이 잘 일어나지 않아 각 채널의 질량유량이 불균일한 분포를 보였으며 특히 속도가 빠른 중심 영역의 채널에 많은 연료가 유입되었다. 이를 위한 디퓨져 모델링이 제안되었으며 실속이 최소한도로 발생할 때 채널당 질량유량이 가장 균일하다고 가정하였다. 이를 위해 다양한 디퓨져 각을 가진 모델을 사용했고, 이론상으로 실속이 발생하지 않는 형상에서 가장 균일한 분포를 보임을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.6
• /
• pp.429-434
• /
• 2017

A molecular-continuum hybrid method was developed to simulate microscale and nanoscale fluids where continuum fluidics cannot be used to predict Couette flow. Molecular dynamics simulation is used near the solid surface where the flow cannot be predicted by continuum fluidics, and Navier-Stokes equations are used in the other regions. Numerical simulation of Couette flow was performed using the hybrid method to investigate the effect of solid-liquid interaction and surface roughness in a nanochannel. It was found that the solid-liquid interaction and surface roughness influence the boundary condition. When the surface energy is low, slippage occurs near the solid surface, and the magnitude of slippage decreases with increase in surface energy. When the surface energy is high, a locking boundary condition is formed. The roughness disturbs slippage near the solid surface and promotes the locking boundary condition.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1198-1201
• /
• 2009

무선 BAN은 인체를 중심으로 3m 이내에서 이루어지는 통신을 위한 기술이다. 무선 BAN은 인체 내 외부에서 의료용 서비스를 위하여 여러 개의 채널로 구성된 MICS(Medical Implanted Communication Service) 주파수 대역을 사용한다. MICS는 다중 채널 환경에서 LBT(Listen Before Talk)와 AFA(Adaptive Frequency Agile)을 사용하여 장치간의 간섭을 최소화한다. 경쟁기반의 LBT와 AFA는 데이터 전송의 안정성을 보장하지 못할 뿐만 아니라 채널 홉핑(Hopping)으로 인한 전력 소비를 야기한다. 본 논문에서는 의료용 데이터의 주기적인 특성과 전송 안정성을 고려하여 예약 기법의 채널 액세스 관리 기법을 제안한다. 여러 채널 가운데 하나의 채널을 제어 채널로 설정하고 나머지는 데이터 전송을 위한 채널로 설정한다. 코디네이터는 제어 채널에서 beacon을 전송하여 디바이스에게 데이터 채널을 할당한다. 예약방식을 통하여 채널 할당의 안정성을 확보할 뿐만 아니라 디바이스의 요구 사항에 따라 채널을 유동적으로 결합함으로써 채널의 효율성을 개선한다. 또한 제어 채널 관리 방안을 통하여 LBT 장치와 상호 운용성을 확보하고, 시뮬레이션을 통하여 예약방식의 채널 관리 방안의 효율성을 검증한다.

• Journal of the Korean Society of Visualization
• /
• v.5 no.1
• /
• pp.37-42
• /
• 2007

Reverse flow occurs in a channel when there is an obstruction at the entry. However it has been shown recently that reverse flow can be realized without an obstruction, by staggering the sides of the channel and placing it at an angle of attack to the oncoming flow. In this study the latter flow is computationally investigated. Studies have been carried out for different widths (gap between the two walls forming the channel), and at an angle of attack of 30. The results have captured all the essential features of this complex phenomenon and show the time dependent pumping mechanism which leads to the occurrence of reverse flow.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.233-238
• /
• 2010

A two-dimensional laminar flow past a vertical plate in a microchannel is investigated. At far upstream and downstream from the plate in the microchannel, the plane Poiseuille flow exists. The Stokes flow for this microchannel is investigated analytically and then the laminar flow by numerical method. For the Stokes flow analysis, the method of eigenfunction expansion is used. From the results, the streamline pattern and the pressure distribution are plotted, and the additional pressure drop induced by the plate and the force exerted on the plate are calculated as functions of the length of the plate. For the laminar flow, finite difference method (FDM) is used to obtain the vorticity and the stream function. When the Reynolds number exceeds a critical value, a pair of viscous eddies appears behind the plate.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.352-357
• /
• 2010

A parametric study has been carried out to elucidate the characteristics of channel flow with a streamwise-periodic array of cylinders. This flow configuration is relevant to heat exchanger applications. The presence of cylinders in channel flow causes the attached wall boundary layer to separate, leading to significant change in flow instabilities. There exist two kinds of instabilities; flow undergoes a primary instability (Hopf bifurcaiton) at a lower Reynolds number, and the unsteady two-dimensional flow becomes unstable to three-dimensional disturbances at a higher Reynolds number. We report here the dependencies of the primary instability as well as the flow characteristics of the subsequent unsteady flow including flow-induced forces and Strouhal number of vortex shedding, on the distance between the cylinder and the channel wall.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.4
• /
• pp.324-331
• /
• 2004

Particle Image Velocimetry (PIV) measurements have been carried out to investigate the pulsatile flow characteristics in a triangular grooved channel. The results showed that a vortex was generated at the tip of the groove and flowed into the groove rotating inside during the acceleration phase of the main stream promoting the mixing of the fluid. Then, at the deceleration phase of the main stream, the vortex entrained fluid from the relatively slow moving main stream to grow bigger than the groove size. Finally the vortex was ejected to the main stream carrying the fluid away from the groove, resulting in the enhancement of mixing between the stagnant fluid in the groove and the main stream in the channel. It was found that the fluid mixing enhancement is maximized when the pulsatile period is the same as the time duration which the vortex takes to grow larger enough to fill the groove and to be ejected to the main stream.