• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.262-262
• /
• 2019

2011년 7월 27일 서울 지역에 내린 시간당 100mm가 넘는 집중호우로 우면산 일대에 산사태가 발생하였고, 그 결과 많은 인명과 재산 피해가 야기되었다. 이러한 토석류로 인한 피해를 저감하기 위한 여러 연구가 이루어진 바 있으나, 대부분의 연구는 연행작용에 대해서 고려하지 못하고 있거나, 인명과 재산 피해의 큰 비중을 차지하는 건물은 모의 분석에 제외되어 있다. 본 연구에서는 연행작용을 고려할 수 있는 Deb2D 모형을 이용하여 하류부에서 토석류의 유동을 건물의 유/무를 구분하여 분석하였다. 우면산 북측사면의 산사태 전 후의 항공 LiDAR DEM을 활용하여 DB를 확보하였고, 추가적으로 수치지형도를 통해 얻은 피해지역 건물들의 형상을 Deb2D 모형에 적용하여 실제 환경과 가까운 모의를 수행하였다. 이러한 자료들을 바탕으로 Deb2D 모형을 이용한 토석류 유동의 분석 및 모의실험을 진행하였고, 발생 지역의 정보가 부족하다는 점을 고려하여 지질특성에 따른 매개변수를 다양한 값으로 산정하여 토석류의 유동을 비교 분석하였다. 건물의 유/무에 따른 토석류 유동의 차이는 유역 하류부인 피해지역에서 모의실험을 통해 나타났다. 이러한 결과를 통하여 연행작용과 건물의 정보를 분석 모형에 추가함으로써 실질적인 인명과 재산 피해를 예측하고, 예방할 수 있을 것으로 기대된다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.4
• /
• pp.136-147
• /
• 2005

Leachate from landfill sites contains high organics, chloride and ammonium nitrogen in concentration which might be potentially major pollutants to surface and groundwater environment. Most of landfill leachate treatment plants in Korea consist of biological processes to remove BOD and nitrogen. However, the efficiencies of refractory organics removal, nitrification and denitrification have not met frequently the national effluent regulation of wastewater treatment facility, especially in winter season. Simultaneous removal of organics and nitrogen from leachate is strongly necessitated to meet the national regulation on effluents from leachate treatment facilities. The intermittently aerated biological activated carbon fluidized bed(IABACFB) process was applied to treat real landfill leachates containing refractory organics and high concentration of ammonium nitrogen. The IABACFB reactor consisted of a single bed in which BAC fluidizing and an aerating column. The fluidized bed is intermittently aerated through the blower located at the aerating column. Experiments were performed to evaluate the applicability of Intermittently Aerated BACFB for simultaneous removal of refractory organic carbon and ammonium nitrogen of leachate. Organics and ammonia nitrogen($NH{_4}{^+}-N$)are oxidized during the aerobic stage, and nitrite-nitrate nitrogen($NO{_x}{^-}-N$) are removed to nitrogen gas through denitrification reaction during anoxic state. The IABACFB reactor condition reached a steady state within 40 days since the reactors had been operated. The blowing mode of 60 min.-On/60 min.-OFF is more compatible to remove TOC and ($NH{_4}{^+}-N$) operated. The blowing mode of 60 min.-On/60 min.-OFF is more compatible to remove TOC and ($NH{_4}{^+}-N$) simultaneously than the mode of 30 min.-On/90 min.-OFF. The average removal efficiencies of TOC, the refractory organic carbon, and the average efficiencies of nitrification and denitrification were 90%, 75%, 80%, 95%, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.7
• /
• pp.441-448
• /
• 2016

The thrust force created by a propeller depends on the incoming flow velocity and the rotational velocity of the propeller. The performance of the propeller can be described by dimensionless variables, advanced ratio, thrust coefficient, and power coefficient. This study included the application of the immersed boundary lattice Boltzmann method (IBLBM) with the stereo lithography (STL) file of the rotating object for performance analysis. The immersed boundary method included the addition of the external force term to the LB equation defined by the velocity difference between the lattice points of the propeller and the grid points in the domain. The flow by rotating a 4-blade propeller was simulated with various Reynolds numbers (Re) (including 100, 500 and 1000), with advanced ratios in the range of 0.2~1.4 to verify the suggested method. The typical tendency of the thrust efficiency of the propeller was obtained from the simulation results of different advanced ratios. It was also necessary to keep the maximum mesh size ratio of the propeller surface to a grid size below 3. Additionally, a sufficient length of the downstream region in the domain was maintained to ensure the numerical stability of the higher Re and advanced ratio flow.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3357-3368
• /
• 1994

Total pressure losses required to calculate the total-to-total efficiency are estimated by integrating empirical loss coefficients of four loss mechanisms along the mean-line of blades as follows; blade profile loss, secondary flow loss, end wall loss and tip clearance loss. The off-design points are obtained on the basis of Howell's off-design performance of a compressor cascade. Also, inlet-outlet air angles and camber angle are obtained from semi-empirical relations of transonic airfoils' minimum loss incidence and deviation angles. And nominal point is replaced by the design point. It is concluded that relatively simple loss models and Howell's off-design data permit us to calculate the off-design performance with satisfactory accuracy. And this method can be easily extended for off-design performance prediction of multi-stage compressors.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.05a
• /
• pp.334-335
• /
• 2023

본 논문에서는 이미지 데이터와 각종 텍스트 기반의 데이터를 적절히 결합하여 유용한 데이터를 만들어 내는 방법을 제안한다. 그 사례로 편의점 상품 이미지와 편의점 프로모션 데이터, 사용자 위치정보 데이터를 적절히 결합하여 사용자가 편의점 상품 전면 이미지를 제공했을 때, 해당 상품이 어떤 편의점 브랜드에서 어떤 프로모션을 진행하고 있는지, 그리고 현재 위치에서 가까운 점포가 어디인지를 사용자에게 제공하는 시스템을 구현한다. 이미지를 어떤 데이터와 결합하는지에 따라 다양한 요구사항에 대응할 수 있다.

• Clean Technology
• /
• v.9 no.4
• /
• pp.179-187
• /
• 2003

The technology of fluidized bed to use dry sorbent can be new technology that reduce the operating cost and make efficient operation. Therefore, this study investigated $CO_2$ control by dry sorbents with operating variables in a fluidized bed, compared with fixed bed for $CO_2$ adsorption capacity and pressure drop, and presented the $CO_2$ adsorption capacity of activated carbon, molecular sieve 5A, molecular sieve 13X, and activated alumina. As the results of this study, the basic data could be achieved for operation of fluidized bed process, and fluidized bed process presented relatively high $CO_2$ adsorption capacity and low pressure drop with the increase of gas velocity. In addition, molecular sieve 5A showed 1.1~3.0-fold later breakthrough point and 1.1~2.7-fold higher adsorption capacity than the other dry sorbents.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.389-391
• /
• 2010

The Free surface influenced the wake behind a circular cylinder and its effects were investigated experimentally in a circulating water channe with the variation of water depth Instantaneous velocity fields were measured in this paper. the measured results has been compared with each other to investigate the flow characteristics of the circular cylinder's 2-dimensional section at $Re=1.0\times10^3$ using 2-frame grey level cross correlation PIV method. The flow around the circular cylinder with free surface affected the wake structure. especially, in case of d=1.0D, the boundary layer was measured in the whole area. The separation point and boundary layer of the circular cylinder could be controlled by the water depth.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10a
• /
• pp.655-657
• /
• 1999

본 논문에서는 1차원 스트링과 2차원 텍스트를 유동적으로 정렬하는 소위 1-2차 연성 정렬 문제를 정의하고, 이 문제를 위한 동적 알고리즘을 제시하고, 응용 예를 보인다. 문제의 패턴은 그 길이가 주어져 있지만 그 형체가 유연성을 갖고 있어 변형될 수 있다는 점이 지금까지 연구되어온 패턴 매칭 문제와 다르다.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.3
• /
• pp.18-27
• /
• 2002

In order to improve the accuracy of the solution near the boundary in an analysis of viscous flow around an arbitrary boundary which move and be deformed using an Eulerian concept, a level-set based grid deformation method is introduced to concentrate grid points near the boundary. This paper presents a new monitor function which can easily control the level of the concentration of grid points along the boundary. Computations for steady flow around a semi-circular cylinder mounted on the bottom of the flow domain were carried out to check the improvement of the solution using the adaptive grid system with an immersed boundary method. The present numerical results show a good agreement with the solutions obtained by a body fitted grid system and more accurate solutions than those computed with non-adaptive grid system. For the validation of mechanical usefulness of the present method, an expanded analysis of flow around multi-body fixed in the flow domain was carried out. Finally, the present moving adaptive grid method was applied to a two-dimensional bubble rise problem. The computed results show well adapted grid points around the boundary of the bubble at every time and a good agreement with the result calculated by fixed grid system.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.28-34
• /
• 2014

Automatic transmission fluid (ATF) is used for automatic transmissions in the vehicle as the characterized fluid. Recently, the vehicle manufacture usually guarantee for fluid change over 80000~100000 km mileage or no exchange, but most drivers usually change ATF below every 50000 km driving in Republic of Korea. It can cause to raise environmental contamination by used ATF and increase the cost of driving by frequently ATF change. In this study, we investigate the various physical properties such as flash point, fire point, pour point, kinematic viscosity, cold cranking simulator, total acid number, and metal component concentration for fresh and used ATF after driving (50000 km, 100000 km). The result showed that the total acid number, pour point, Fe, Al and Cu component had increased than fresh ATF, but 2 kind of used oil (50000 km and 100000km) had similar physical values and metal component concentration.