• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.162-167
• /
• 2006

Hot embossing lithography(HEL) has the production advantage of comparatively few process step, simple operation, a relatively low cost for embossing tools(Si), and high replication accuracy for small features. In this paper, we considered the nano-molding characteristic according to molding parameters(temperature, pressure, times, etc) and induced a optimal molding condition using HEL. High precision nano-patter master with various shapes were designed and manufactured using the DRIE(Deep Reactive ion Etching), LPCVD(Low Pressure Chemical Vapor Deposition) and thermal oxidation process, and we investigated the molding characteristic of DVD and Blu-ray nickel stamp. We induced flow behaviors of polymer, rheology by shapes and sizes of the pattern through various molding experiments. Finally, with achieving nano-structure molding with high aspect ratio, we will secure a basic technology about the molding of large-area nano-pattern media.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.621-626
• /
• 1985

Unsteady groundwater flow in a three-layer unconfined aquifer has been studied theoretically and experimentally. Two different methods have been used in solving the governing equations of the flow, the nonlinear partial differential equations; (1) The governing equations are linearized for each layer and approximate solutions are obtained. (2) The governing equations are transformed to nonlinear ordinary differential equations, which are solved numerically by Runge-Kutta procedure. Fine, middle sized and coarse sands are used in the experiments. It is found that the solutions from the method(2) ( the reduction of partial differential equations to ordinary differential equations) give better agreement with the experimental results than the solution from the method(1).

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.4
• /
• pp.76-81
• /
• 2000

In this Paper, an improved L-Expressnet Protocol is proposed by supplementing slot-extension function. This protocol is Proposed to complement the shortcomings of the conventional protocol which is used for the medium access control (MAC) in LAN. We analyzed the protocol in channel utilization viewpoint and compared the result with that of the conventional L-Expressnet medium access control (MAC) protocol. From this result. we showed that the channel utilization of the improved L-Expressnet protocol added slot-extension function is superior to that of the conventional Protocol.

• Proceedings of the Korea Contents Association Conference
• /
• 2018.05a
• /
• pp.297-298
• /
• 2018

현대예술에서는 장르의 통합, 형식의 파괴 예술과 디지털과의 융합 등 다양한 매체들이 서로 섞여 다각적으로 활용하게 되었다. 영상미디어와 무용의 융합은 앞으로 예술발전에 그 기능의 효과를 최대화하고 새로운 영역으로의 발전가능성이 제기되고 있다. 본 연구는 무용에서의 영상미디어 도입과 활용의 발전과정을 살펴보고 작품 제작과정을 통하여 공연에서의 영상 미디어 활용에 따른 표현의 극대화 추구가 앞으로 공연예술에서 다양한 표현으로 해석될 수 있는데 목적이 있다. 연구결과는 다음과 같다. 첫째, 영상 미디어 활용효과는 작품의 리얼리티를 더하고 움직임이 표현하고자 하는 것을 장면전환과 함께 효과적으로 전달 할 수 있게 됨을 알 수 있다. 둘째, 무용 공연에 나타난 영상미디어 활용효과는 공간의 범위를 조절할 수 있고 무대공간을 유동적으로 확장시킴으로 자유로운 표현이 가능하다. 따라서 무용과 영상미디어의 융합은 새로운 무용의 이미지 개발에 기여하고 움직임에 있어서 독창성을 극대화시킬 수 있다.

• Journal of the Korean Institute of Gas
• /
• v.5 no.3 s.15
• /
• pp.1-8
• /
• 2001

This study was carried out for the purpose of determination of maintenance period and investigation of weak point due to freeze when the gas heater of KOGAS valve station Is not operated in winter season. 3-dimensional non-linear numerical simulation was conducted in order to predict the time and location which bath water in heater reaches to ice point. FLUENT V 5.0, commercial code, is used for thermal fluid flow analysis. We thought this was problem of heat conduction solving the energy equation and modeled gas heater by using the real geometry and scale for performing the 3-dimensional simulation. It was analyzed complex heat transfer phenomena considering convection due to air on surface, conduction in insulation material, natural convection of liquid in heater and heat loss through the pipe.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1877-1884
• /
• 2014

Because of the limited power resource, we need a reliable low-power media access control technique suitable for unmaned remote sensor operation condition for the unmanned sensor processor to perform the task in the remote wireless network situation. Therefore CSMA/CA and X-MAC is generally considered to effectively transmit the signal in the low-power wireless network. In this paper, we propose the more efficient low-power LP-MAC Technique which consumes the minimum power and transmits the data faster in condition that the mobile nodes' joining to and leaving from the network which consists of the fixed nodes is fluid. The fixed nodes operate in an asynchronous mode to perform the network self-configuration and transmit data faster to the mobile node which is frequently join and leave the network. When the mobile node leaves the network, the network's operation mode will be synchronous mode to achieve the minimum power consumption, thus the minimum power operation becomes possible.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.137-145
• /
• 2001

A new process, gelcasting in aqueous medium, to fabricate complex-shaped ceramic core has investigated. The ceramic slurry, mixture of fused silica powder and additives such as zircon and cordierite, was electrosterically stabilizes. The slip was prepared by ball milling of polydispered ceramic suspension with monomer, dimer and dispersant. The rheological behavior of slip was evaluated by viscosity measurement. It was found that the high solid loading of polydispersed ceramic slip, which has low viscosity of 50vol%, is possible to obtained. The viscosity of the slip was significantly dependent upon the amount of polymer dispersant and the formulation of monomer and dimer. The green bodies were fabricated through casting and gelation at room temperature followed by drying at $25^{\circ}C$ for 48hrs under relative humidity of 80~85%. Crack-free green body was successfully fabricated through the above process.

• Design Convergence Study
• /
• v.14 no.5
• /
• pp.31-45
• /
• 2015

Recently, due to the development of interactive media, Interactive Typography, which explores user input and interaction is under development. Unlike traditional typography which has a fixed nature, the flexible and fluid nature of Interactive Typography and Interactive System, enables diverse results. In this study, I have developed an Interactive Typography art piece based on theoretical research. By reviewing books, papers and articles, I have tried to define the meaning and characteristics of Interactive Typography. In understanding the concept of Interactive System, I have borrowed the concept of mathematical function. Based on the research, I have designed and developed an Interactive Typography piece, 'Interactive floral type' by using Adobe flash action script. This piece explores the beautiful shape of each alphabet letters and transforms individual character into a 'flower' shape through user's mouse and keyboard input. Depending on the input the size, color, and layout and motion of text changes in real time to change the letters into beautiful flowers.

• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.289-295
• /
• 2006

A computational fluid dynamics (CFD) numerical model has been developed to effectively study the ventilation efficiency of multi-span greenhouses with internal crops. As the first step of the study, the internal plants of the CFD model had to be designed as a porous media because of the complexity of its physical shapes. In this paper, the results of the wind tunnel tests were introduced to find the aerodynamic resistance of the plant canopy. The Seogun tomato was used for this study which made significant effects on thermal and mass exchanges with the adjacent air as well as internal airflow resistance. With the main factors of wind speed, static pressure, and density of plant canopy, the aerodynamic resistance factor was statically found. It was finally found to be 0.26 which will be used later as an input data of the CFD model. Moreover, the experimental procedure of how to find the aerodynamic resistance of various plants using, wind tunnel was established through this study.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.6
• /
• pp.5-16
• /
• 2002

A hydrogeomechanical numerical model is presented to evaluate rainfall impacts on groundwater flow in slopes and slope stability. This numerical model is developed based on the fully coupled poroelastic governing equations for groundwater flow in deforming variably saturated geologic media and the Galerkin finite element method. A series of numerical experiments using the model developed are then applied to an unsaturated slope under various rainfall rates. The numerical simulation results show that the overall hydromechanical slope stability deteriorates, and the potential failure nay initiate from the slope toe and propagate toward the slope crest as the rainfall rate increases. From the viewpoint of hydrogeology, the pressure head and hence the total hydraulic head increase as the rainfall rate increases. As a result, the groundwater table rises, the unsaturated zone reduces, the seepage face expands from the slope toe toward the slope crest, and the groundwater flow velocity increases along the seepage face. From the viewpoint of geomechanics, the horizontal displacement increases, and the vertical displacement decreases toward the slope toe as the rainfall rate increases. This may result from the buoyancy effect associated with the groundwater table rise as the rainfall rate increases. As a result, the overall deformation intensifies toward the slope toe, and the unstable zone, in which the factor of safety against shear failure is less than 1, becomes thicker near the slope toe and propagates from the slope toe toward the slope crest. The numerical simulation results also suggest that the potential tension failure is likely to occur within the slope between the potential shear failure surface and the ground surface.