• Journal of the Korean Chemical Society
• /
• v.21 no.5
• /
• pp.339-352
• /
• 1977

The authors' theory developed in the preceding Paper 1 was applied to plastic deformation of ceramics, metals, alloys and single crystals. For polycrystalline substances, the flow mechanisms due to dislocation movement and grain boundary movement appear together or separately according to the experimental conditions whereas for single crystals, only the mechanism of dislocation movement appears. The parameters appearing in the flow equations $({\alpha}_{d1},\;1/{\beta}_{d1})and\;({\alpha}_{gj}/X_{gj},\;1/{\beta}_{gj})$ (j = 1 or 2), and the activation enthalpies ${\Delta}H_{k1}^{\neq}$ (k = d or g) were determined and tabulated. Here, the subscript d1 indicates the first kind of dislocation flow units and gj expresses the jth kind of grain boundary flow units. The predictions of the theory were compared with experiment with good agreement. Concerning the activation enthalpies, it was found that ${\Delta}H_{d1}^{\neq}$ 〉{\Delta}H_{g1}^{\neq}$ and that the former agrees with the activation enthalpy for bulk self-diffusion whereas the latter agrees with the activation enthalpy for grain boundary self-diffusion. These facts support the adequacy of the authors' theory which is considered as a generalized theory of plastic deformation.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1050-1059
• /
• 2019

The self diffusion, hole volume, and flow thermodynamic parameters of polyamide fibers were calculated from rheological parameters and crystallite size in order to study of flow segments in amorphous region. The stress relaxation of polyamide filament fibers were carried out in air and various solvents at various temperatures using the tensile tester with the solvent chamber. The rheological parameters were obtained by applying the experimental stress relaxation curves to the theoretical equation of the Ree-Eyring and Maxwell non-Newtonian model. It was observed that the rheological parameters of these polyamide filament fibers are directly related to the relaxation spectra, self diffusion, viscosities, and activation energies of flow segments.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.497-502
• /
• 2003

청정석탄이용기술개발의(CCT : Clean Coal Technology) 일환으로 차세대 발전방식으로 유력시되고 있는 기술인 석탄가스화발전기술(IGCC), 석탄가스화 연료전지(IGFC)등에서 고온건식탈황은 필수요소기술이다. 고온건식탈황기술의 핵심기술은 탈황제개발고 공정기술개발로 나누어 볼 수 있다. 탈황제개발은 국내고유 탈황제개발 연구가 진행 중에 있고 유동층과 고속유동층에 적합한 탈황제를 kg단위로 성형하여 공정개발에서 반응특성 실험을 하였다.(중략)

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.10
• /
• pp.73-82
• /
• 2011

Coal ash of industial by-products was not recycled about 30% in total emissions. Moreover, it caused environmental pollution as well as wasted unnecessary expenses and time. Currently, fly ash(FA) is recycled as construction material however ponded ash(PA) is mostly buried. Lightweight foamed Controlled Low-Strength Materials(CLSM) evaluated in this study reduces unit weight by mixing foam in the traditional Controlled Low-Strength Material and has lightweight and flowability to be available for backfill materials in construction. Flow test, unconfined compressive strength test, and foamed-slurry unit weight test were performed in this study and the applicability of lightweight foamed CLSM for construction materials was evaluated. The results indicate that the mixture ratio(PA:FA) ranging from 70:30 to 50:50, cement of 7%, foam of 2~3%, and water content of 26.5~29.5% were required to satisfy the following standards such as flow value(i.e., 20cm), unconfined compressive strength(i.e., 0.8~1.2MPa), and foamed-slurry unit weight(i.e., $12{\sim}15kN/m^3$).

• Journal of Energy Engineering
• /
• v.9 no.3
• /
• pp.212-220
• /
• 2000

히트파이프 히트싱크의 라디에이터를 통과하는 공기 유동에 대한 열전달 및 유동 압력 강하를 구하기 위한 연구를 수행하였다. 이 라디에이터는 평판 휜-관 구조이며, 평판휜에 4개의 히트파이프가 유동 방향으로 정격 배열 되어있다. 입구 공기 속도 2.5~4m/s에 대해 열전달 성능실험과 수치해석을 수행하였다. 각 히트파이프의 단위 길이당 열속이 583.3W/m, 입구 공기 속도가 3m/s일때 총합 대류 열전달계수값은 약 32W/$m^2$K, 압력 강하는 8mmAq이었다. 전체속도범위에서 실험결과와 수치 해석 결과 사이에는 약 5%의 미만의 일치를 보였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.275-275
• /
• 2018

본 연구의 목적은 지표수-지하수 통합 모델을 통해 모델 영역과 시설농업단지(밀양들)의 지표수/지하수 유동을 모의하고 모델 영역의 물수지 분석을 통해 지하수 함양량을 산정하는 것이다. 지표수 유동 모델 결과에서는 밀양강 상류(북동쪽)에서 하류(남동쪽)로 약 1~5 m의 수심으로 지표수가 유동하고 있으며, 모델지역 상류의 M01 지점에서는 지표수 유량 관측값과 모델값이 일치하고, 모델지역 하류의 M02 지점에서의 지표수 유량은 1% 정도의 차이를 보인다. 지하수 유동 모델에서는 지하수 심도가 하천에서는 표고와 유사하며 산림 지역으로 갈수록 높아지고, 지하수 양수를 고려한 지하수 심도는 모델값이 관측값보다 1.5 m 이내의 범위로 높게 나타난다. 지표수지하수 통합모델에서는 지하수의 함양 면적이 모델 면적의 90% 정도이고, 지하수 함양량은 $1.92{\times}105m^3/day$인 것으로 나타난다. 연평균 물수지 분석에서는 단위 면적당 지하수 함양량이 503.9 mm/year로서 연평균 강우량의 39% 정도로 추정된다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.283-296
• /
• 2008

The numerical simulations for groundwater flow were carried out to support the input parameters for safety assessment in LILW repository site. As the input parameters for safety assessment, the groundwater flux into the underground facilities during construction, flow rate through the disposal silo after closure of disposal silo and flow pathway from the disposal silo to discharge area were analyzed using the 10 cases groundwater flow simulations. From the total 10 numerical simulation results, the statistics of estimated output were similar to among 10 cases. In some cases, the analyzed input parameters were strongly governed by locally existed high permeable fracture zone at radioactive waste disposed depth. Indeed, numerical simulation for well scenario as a human intrusion scenario was carried out using the hydraulically severe case model. Using the results of well scenario, the input parameters for safety assessment were also obtained through the numerical simulation.

• Elastomers and Composites
• /
• v.46 no.3
• /
• pp.245-250
• /
• 2011

The self diffusions and hole volumes of amorphous region of poly(acrylonitrile)-poly(vinyl chloride) fibers were investigated by experiments of stress relaxation. The experiments of stress relaxation were carried out using the tensile tester with the solvent chamber. The flow parameters of filament fibers were obtained by applying the experimental stress relaxation curves to the theoretical equation of stress relaxation. From the flow parameters, the hole volumes, self diffusions, viscosities and thermodynamic parameters of solid polymers were calculated. It was observed that the flow parameters of these samples are directly related to the hole volumes, self diffusions and flow activation energies of flow segments.

• Journal of the Korean Institute of Gas
• /
• v.4 no.2 s.10
• /
• pp.7-14
• /
• 2000

LNG (Liquified Natural Gas) carried by LNG ship is unloaded into the LNG storage tanks at the very low temperature (a little lower than the boiling point of LNG). Because LNG is unloaded through the pipeline, two phase flow appears in the pipeline. In this study, we have studied the pressure-drop mechanisms of the two-phase flow in the pipeline, and the calculation method of BOG (Boil-off Gas) amount based on the heat transfer mechanism through the insulation and the surface of the pipeline. We have developed a computer program for thermal-hydraulic analysis on the LNG pipeline system. We have also developed the optimal design program to find the optimal thickness of insulation and the pipeline size. The program searches the optimal design with the minimum capital cost of pipelines and insulation on the operating conditions of maximum allowance pressure-drop and BOG amount, etc.

• Journal of Broadcast Engineering
• /
• v.14 no.4
• /
• pp.409-418
• /
• 2009

This paper proposes a method to estimate the flow speed of pedestrians in surveillance videos. In the proposed method, the average moving speed of pedestrians is measured by estimating the size of real-world motion from the observed motion vectors. For this purpose, a pixel-to-meter conversion factor is introduced which is calculated from camera parameters. Also, the height information, which is missing because of camera projection, is predicted statistically from simulation experiments. Compared to the previous works for flow speed estimation, our method can be applied to various camera views because it separates scene parameters explicitly. Experiments are performed on both simulation image sequences and real video. In the experiments on simulation videos, the proposed method estimated the flow speed with average error of about 0.08m/s. The proposed method also showed promising results for the real video.