• Journal of the Korean Chemical Society
• /
• v.21 no.5
• /
• pp.330-338
• /
• 1977

In order to elucidate the plastic deformation of solids, the following assumptions were made: (1) the plastic deformation of solids is classified into two main types, the one which is caused by dislocation movement and the other caused by grain boundary movement, each movement being restricted on a different shear surface, (2) the dislocation movement is expressed by a mechanical model of a parallel connection of various kinds of Maxwell dislocation flow units whereas the grain boundary movement is also expressed by a parallel connection of various kinds of Maxwell grain boundary flow units; the parallel connection in each type of movements indicates that all the flow units on each shear surface flow with the same shear rate, (3) the latter model for grain boundary movement is connected in series to the former for dislocation movement, this means physically that the applied stress distributes homogeneously in the flow system while the total strain rate distributes heterogeneously on the two types of shear planes (dislocation or grain boundary shear plane), (4) the movement of dislocation flow units and grain boundary units becomes possible when the atoms or molecules near the obstacles, which hinder the movement of flow units, diffuse away from the obstacles.Using the above assumptions in conjunction with the theory of rate processes, generalized equations of shear stress and shear rate for plastic deformation were derived. In this paper, four cases important in practice were considered.ted N${\cdot}{\cdot}{\cdot}$O hydrogen bond and the second of two normal N${\cdot}{\cdot}{\cdot}$O hydrogen bonds, both of which exist between the amino group and the perchlorate, groups. A p-phenylenediamine group is approximately planar within an experimental error and bonded to twelve perchlorates: ten perchlorates forming hydrogen bonds and two being contacted with the van der Waals forces. A perchlorate group is surrounded by six p-phenylenediamines and four perchlorates; among the six p-phenylenediamines, five of them are hydrogen-bonded, and the rest contacted with the van der Waals force.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.581-590
• /
• 2017

This study analyzes the effect of floating population, locational characteristics and spatial autocorrelation on foodservice sales using big data provided by the Seoul Institute. Although big data provided by public sector is growing recently, research difficulties are occurred due to the difference of aggregation units of data. In this study, the aggregation unit of a dependent variable, sales of foodservice is SKT unit but those of independent variables are various, which are provided as the aggregation unit of Korea National Statistical Office, administration dong unit and point. To overcome this problem, we convert all data to the SKT aggregation unit. The spatial error model, SEM is used for analysing spatial autocorrelation. Floating population, the number of nearby workers, and the area of aggregation unit effect positively on foodservice sales. In addition, the sales of Jung-gu, Yeongdeungpo-gu and Songpa-gu are less than that of Gangnam-gu. This study provides implications for further study by showing the usefulness and limitations of converting aggregation units of heterogeneous spatial data.

• Journal of the Korean Chemical Society
• /
• v.58 no.3
• /
• pp.251-257
• /
• 2014

The stress relaxation of poly(methyl acrylate)-poly(acrylonitrile) copolymer samples were carried out in air and distilled water at various temperatures using the tensile tester with the solvent chamber. The rheological parameters were obtained by applying the experimental stress relaxation curves to the theoretical equation of the Eyring-Halsey non-Newtonian model. The self diffusion, hole volume, viscosities, and thermodynamic parameters of copolymer samples were calculated from rheological parameters and crystallite size in order to study of flow segments in amorphous region. It was observed that the rheological parameters of these copolymer samples are directly related to the self diffusion, hole volume, viscosities, and thermodynamic parameters of flow segments.

• Fire Science and Engineering
• /
• v.15 no.2
• /
• pp.59-79
• /
• 2001

The paper proposes alternatives for fire safety in architectural planning through heat-smoke distribution related to openings so that we decrease casualty and property loss by fire and lay a great emphasis on building high-rise apartments with consideration of fire safety in Korea. An analysis program(HFA-Heat Fluid Analysis) is built to perform simultaneously numerical analysis and experimental analysis on rooms, units and buildings. In consequence, on the first, fire prevention methods are required to be set up related to openings for design rooms since the flow of heat and smoke is influenced by the type of openings in high-rise apartments. Second, the numerical analysis showed that different planning types cause to show differences in the spreading time of heat and smoke to design the units of high-rise apartments. On the third, each unit building showed different fire behavior depending on openings by numerical analysis and small scaled experiment on heat and smoke flow.

• Journal of Korea Water Resources Association
• /
• v.42 no.11
• /
• pp.897-909
• /
• 2009

The relative contribution of between hillslope-flow and stream-flow by heterogeneity of drainage path are quantitatively assessed in the present study with GIUH model based on grid of GIS. Application watersheds are selected Pyeongchang, Bocheong and Wi river basin of IHP in Korea. The mean and variance of hillslope and stream length are estimated and analyzed in each watershed. And coupling with observation storm events, estimate hillslope and stream characteristic velocity which dynamic parameters of GIUH model. The mean and variance of distribution of travel time (i.e. IUH) calculate using estimated pass lengths and characteristic velocities. And the relative contributions are assessed by heterogeneity of drainage path. As a result, the effect of the variance that determine shape of IUH dominate with hillslope's effect in the small watershed area (within 500 $km^2$). Thus, GIUH in the small watershed area must consider hillslope-flow.

• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.323-328
• /
• 2009

The rheological properties of complex materials such as polymer melts show complicated non-Newtonian flow phenomena when they are subjected to shear flow. These flow properties are controlled by the characteristics of flow units and the interactions among the flow segments. The non-Newtonian flow curves of poly(vinyl alcohol) hydrogel were obtained in various concentrations and temperatures by using a cone-plate rheometer. By applying non-Newtonian flow equation to the flow curves for PVA hydrogel samples, the rheological parameters were obtained. The PVA hydrogel samples are shear thinning under increasing shear rate modes which result in thixotropic behavior.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.44-48
• /
• 1996

본 연구는 석탄가스화복합발전(IGCC) 시스템중 핵심 단위 장치중의 하나인 가스화기 내부에서 일어나는 석탄의 가스화 반응 연구를 PCGC-2 프로그램을 통해 수행하였으며 일차적인 목표로 반응장에서의 선회 강도에 따른 가스화기내 유동 및 반응 특성을 파악하고자 하였다.

• Journal of the Korean Chemical Society
• /
• v.50 no.6
• /
• pp.447-453
• /
• 2006

of synthetic conditions and water content on rheological properties of polyacrylamide hydrogels were studied. The non-Newtonian flow curves of polyacrylamide hydrogels were obtained by using a cone-plate rheometer. The rheological parameters were obtained by applying non-Newtonian equation to the flow curves for polyacrylamide hydrogels. The polyacrylamide hydrogels are shear thinning under increasing shear rate modes which result in thixotropic behavior. These flow properties are controlled by the characteristics of flow units and the interaction among the flow segments.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2009.04a
• /
• pp.262-264
• /
• 2009

국내 마케팅 시장은 전체 분야에 걸쳐 출혈경쟁이 이뤄지고 있다. 이와 같은 환경에서 기업들이 올바른 의사결정을 통해 경쟁력을 확보하려면 시장의 잠재력을 정량적으로 파악하는 노력이 필요하다. 특히, 배후지의 인구, 직장인, 그리고 유동인구 규모 등은 시장의 잠재력을 판단하는 기본 정보다. 배후지의 인구와 직장인 정보는 국가통계 자료 등을 활용하거나 기타 추정방법에 의해 산정되어 활용되고 있다. 하지만, 유동인구에 관한 정보는 실제 거리에 나가 인구를 측정하여 활용하는 방안 외에는 마땅한 추정방법이 없는 실정이다. 이러한 이유로 유동인구가 매출에 직접적인 영향을 주는 기업들은 많은 시간과 인력을 투입하여 유동인구 수를 측정하고 있다. 하지만, 비용적인 측면에서 한계가 있다. 본 연구에서는 Point 기반의 인문사회 Spatial DB를 활용하여 전국단위의 유동인구를 추정하는 방법론을 제안했다. 또한, 유동인구 정보에는 연령 및 성별 비율까지 추정하여 다양한 활용이 가능하도록 하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.2
• /
• pp.47-59
• /
• 1982

It is well practised in the field of concrete engineering that the effort of improving the low slumped concrete and uplifting the quality of the soft concrete by adopting the superplasticizer. In this paper, an attempt is made to find out the optimum mix design of the superplasticized concrete with an unit weight of cement 400 kg and the range of $19{\pm}1cm$ of slump by variatlng the sand percentage, unit water content and the dosage of superplasticizer. As a result, the author obtained the basic idea on the optimum mix design and strength of superplasticized concrete. On the other hand, it is also considered during the research the method of preventing the slump loss of the superplasticized concrete due to the delayed time after concrete mixing.