• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1989.11a
• /
• pp.1-15
• /
• 1989

바이오트라이보로지(biotribology)란 생물학(biology)와 마찰학(tribology)의 합성어로서 그리이스어의 $\tau\rhoc\betao\sigma$(마찰하다)가 어원이며, 마찰 마모 윤활의 학술 용어 "tribology"가 영어로 된것은 1966년이다. 이때 마찰학이란 이학 또는 공학현상으로서 문제를 해석하는데 한정하였고 생물에 대한 문제까지 광범위하게 고려하지 못하였다. 1972년 영국 석유학회, 기계학회 그리고 Rheology 학회의 공동개최로 "윤활제의 레올로지" 회의가 열렸다. 거기서 Dowson 교수(기계공학)와 Right 교수(루마치스 의학)의 공동논문 "Bio-Tribology"를 발표해서 처음으로 그 용어를 제안하였다. Dowson 교수가 열거했던 바이오트라이보로지의 대상은 다음과 같다. (1) 기계에 사용되는 윤활제에 대한 미생물의 영향 (2) 인간의치의 마모 (3) 면도칼에 대한 저마찰 보호막의 작용 (4) 인체내의 유체수송(뇨관내의 유동기구, 타액의 운동, 혈액흐름) (5) 모세혈관내에서 적혈구의 운동과 혈장에서 그의 윤활작용 (6) 화상치료시 "정압기체 축수"적 부양 (7) 음식물을 씹을 때 타액의 윤활작용 (8) 관절기능의 윤활학적 연구 (9) 인공골두와 인공관절의 윤활학적 연구8) 관절기능의 윤활학적 연구 (9) 인공골두와 인공관절의 윤활학적 연구

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.814-822
• /
• 1986

Flow patterns and its transitions in vertical two phase flow of air-water isothermal flow are identified objectively by void output signals and moments computed from the Probability Density Function which is associated with the statistical measurement for time average local void fractions using conductance probe. It has been shown that the probe output signals, PDF distributions and its moments are deterministic criteria of flow pattern and transition classification.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.3
• /
• pp.450-460
• /
• 1995

A modified circulating fluidized bed heat exchanger under severe fouling condition is developed. The effects of fouling deposits on the performance of a heat exchanger are investigated. The principle and operating characteristics of a circulating fluidized bed heat exchanger are dicussed. A modified circulating fluidized bed heat exchanger shows more stable operating than the other circulating fluidized bed heat exchanger. The characteristics of self cleaning and heat transfer enhancement of a circulating fluidized bed heat exchanger are studied. The movement of spherical particles in a tube is visualized and heat transfer enhancement and scale reduction mechanism by particles are investigated.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.8
• /
• pp.683-689
• /
• 2002

This paper is to present the results of a comprehensive study on heat transfer in annuli with spirally corrugated inner tubes in the turbulent regime. Tube surface-temperature measurements were used to explain the enhancement phenomena in the annuli with several different corrugated tubes. Nusselt numbers were between 1.1 and 2 times the smooth annulus values. These enhancement values can be used to determine the appropriate range of applicability for spirally corrugated annuli.

• Journal of the KSME
• /
• v.33 no.11
• /
• pp.966-972
• /
• 1993

모세관(capillary tube)은 일정면적식 팽창기구의 대표적인 것으로서 사용역사가 길고, 신뢰성이 높고, 가격이 저럼하므로 냉동공조시스템의 냉매제어장치로 매우 많이 사용되고 있다. 이것은 냉동시스템의 응축기와 증발기 사이에서 유입하는 고압의 액상냉매를 증발기에서 증발하기 쉬운 증발압력까지 압력을 강하시키는 감압팽창작용과 증발기의 증발 용량에 적당한 냉매 질량유량을 공급하는 역할 (이 작용은 냉동시스템의 용량과 작동범위를 결정하는데 매우 중요하다.)을 한다. 이 글에서는 모세관의 형상, 재질 및 그장 . 단점과 작동원리, 내부 유동현상 등 일반적인 사항에 관하여 기술한다.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.11-17
• /
• 1991

내연기관의 열전달은 구조물에 따라 흡기계통, 연소실, 배기계통으로 나누어지고, 열전달기구에 따라 전도, 대류, 복사로 나누어지며, 여기서는 그중 가장 핵심이 되는 연소실 내에서의 대류 및 복사 열전달 현상에 관하여 논하고자 한다. 연소실 열전달의 정량적 해석을 위해서는 흡기계통과 피스톤 운동에 의한 3차원 압축성 난류 유동장과 점화, 착화 및 연소 진행과정, 이들의 복합적 상호 작용에 대한 이해가 선행되어야 한다. 여기서는 현재까지 제시된 연소실 열전달의 정량적 모델과 문제점,앞으로의 연구 진행방향에 대해 소개하고자 한다.

• Fire Science and Engineering
• /
• v.7 no.1
• /
• pp.5-10
• /
• 1993

Flame spreading over liquid fuel surface has been investigated using thermocouple and schlieren photograph. Without forced convection, it was clearly found that the flame spreading is mainly controlled by surface flow which is maybe generated by change of surface tension. Furthermore, the radiative heat transfer is dominant over a conductive heat transfer in kerosene. But the latter was found more influential than the former in diesel. Oscillation of flame spreading was found. It maybe cause of surface flow.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.96-101
• /
• 1986

The average heat transfer coefficient of 2-D impinging jet has been augmented as much as 60% on the wall with large-scale wavy roughness. The mechanism of this heat transfer augmentation is studied with emphasis on two primary flow structures in the impinging flow region by using either the surface floating method or the smoke-wire technique. They are the stream-wise vortex-like structure, which is characteristic to the impining jet, and the spanwise vortiecs associated with the flow separation around the roughness. The combined effect of these structures can effectively augment the heat transfer particularly in the downstream region where the teat transfer usually deteriorates consicerably.

• Nuclear Engineering and Technology
• /
• v.12 no.3
• /
• pp.153-162
• /
• 1980

The investigation of the fuel cladding temperature behavior and heat transfer mechanism during the reflooding phase of a LOCA plays an important role in performance evaluation of ECCS and safety analysis of water reactors. Reflooding experiments were performed with horizontal and vertical flow channels to investigate the effect of coolant flow channel orientation on rewetting process. Emphasis was mainly placed on the CANDU reactor which has horizontal pressure tubes in core, and the results were compared with those of vertical channel. Also to investigate the rewetting process visually, the experiments by using a rod in annulus and a quartz tube heated outside were performed. It can be concluded that the rewetting velocity in horizontal flow channel is clearly affected by flow stratification, however, the average rewetting velocity is similar to those in vertical flow channel for same conditions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.252-261
• /
• 1991

A particle trajectory model to simulate two-phase particle-laden crossjets into two-dimensional horizontal free stream has been developed to study the variations of the jet trajectories and velocity variations of the gaseous and the particulate phases. The following conclusions may be drawn from the predicted results, which are in agreement with experimental observations. The penetration of the two-phase jet in a crossflow is greater than that of the single-phase jet. The penetration of particles into the free stream increases with increasing particle size, solids-gas loading ratio and carrier gas to free stream velocity ratio at the jet exit. When the particle size is large, the solid particles separate from the carrier gas , while the particles are completely suspended in the carrier gas for the case of small size particles. As the particle to carrier gas velocity ratio at the jet exit is less than unity, the particles in the vicinity of the jet exit are accelerated by the carrier gas. As the injection angle is increased, the difference of the particle trajectory from that of the pure gas becomes larger. Therefore, it can be concluded that the velocities and trajectories of the particle-laden jets in a crossflow change depending on the solids-gas loading ratio, particle size, carrier gas to free stream velocity ratio and particle to gas velocity ratio at the jet exit.