• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.3
• /
• pp.231-239
• /
• 1999

An improved version of current-regulated delta modulator (CRDM) is investigated for the output cunent control of v voltage-source inverters that have transformer-coupled series resonant load and are operated at the resonant frequency. Conventional CRDM has not only CUlTent offset problem but also transformer flux saturation problem when i it is applied to induction heating systems that have transformel-coupled loads. To cope with these problems, the effect of flux saturation is analysed, and simple method to av이d the problem is proposed. And integral type of CRDM is a adopted to remove the cunent offset. The boundaries of integrator gain for stable operation is calculated using the c concept of sliding mode controL The validity of proposed strategy is vel퍼ed through simulations and prototype e experiments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.76-77
• /
• 2006

유기발광소자의 주파수 응답 특성은 계면에서의 특성을 파악하는데 유요한 도구이다. 온 연구는 유기발광소자의 재료로 널리 알려진 $Alq_3$를 이용하여 소자를 제작한 후, 주파수 응답 특성을 이용하여 $Alq_3$의 등가회로를 해석하였다. 또 온도에 따른 용량성분을 분석하여 $Alq_3$에 인가된 전압에 따라 용량성분의 변화를 살펴보았다. 용량성분의 변화는 낮은 주파수 영역에서는 나타나지 않다가, 높은 주파수 영역에서 온도에 따라 미묘하게 감소하는 것을 볼 수 있다. 이는 낮은 주파수 영역에서 높은 주파수 영역으로 변화하면서 소자 내의 주된 성분이 저항성분에서 용량성분으로 변화하는 것을 의미하며 높은 주파수에서 온도에 따른 용량성분의 변화를 찾을 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.71-73
• /
• 1995

For the accurate analysis of induction motors driven by PWM-type inverter, a time-stepping finite element method is presented in this paper. Since the PWM-type source voltage is not sinusoidal, the time harmonic method can not be used. Therefore, we used a time-stepping method, where the space harmonics due to the slot structure can be analyzed and each time-step size is determined from each increase of rotor position. As a numerical example, an induction motor of 20 Hp, 3 phase and 6 pole is analyzed. First, numerical results of the time-stepping finite element analysis are compared to those of conventional equivated circuit analysts. Next, the stator current characteristic obtained from PWM voltage source is compared to that from sinusoidal voltage source.

• Journal of Biomedical Engineering Research
• /
• v.21 no.4
• /
• pp.345-351
• /
• 2000

This study is to dvelop a radiotelemetry system to transmit and receive ECG (electrocardiograph) and event signals by using the frequency division multiplexing(FDM) technique. ECG signal sensed by the electrodes is amplified and added to the event signals acting in different frequency range for lead-off, nurse call and low level battery by using FDM. The sub-carrier oscillator using Colpitts circuits and main carrier frequency which is multiplied is frequency modulated by this superhetrodyne technique, and demodulated from the compose IF signal through the quadrature demodulator. A pulse counter demodulator and filtering circuits extract the original ECG and event signals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5143-5149
• /
• 2011

In this paper, using the adaptive sliding mode observer for speed sensorless vector control is proposed. Adaptive sliding mode observer of the motor stator coordinate system using the voltage equations of the rotor flux components are observed. Motor speed was obtained by the Lyapunov function is estimated by the relationship further. In order to establish such a control scheme based on the way conventional PI controller and sliding mode observer annexing characteristics of the system through simulation and experiment were compared. According to analysis by comparison with the usefulness of the system was confirmed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1070-1074
• /
• 2008

Body fat correlation formula induced by using optical method was used white light LED source and electrical method used BIA(Bio-electrical Impedance Analysis) method measured at same time. In the case of BIA method confirmed phase difference of 6 degree and voltage drop of 2.7V at 5V and 50kHz's input signal. In the case of optical method confirmed that optical intensity increased by order of the biceps, the fleshy inside of the thigh and the triceps. We obtained percent body fat of 20% with the body fat correlation formula induced by photo-electricity method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.759-762
• /
• 2009

에너지 소비 증가와 환경문제의 이슈화로 전력 산업의 고도화 및 에너지 고효율화에 대한 관심이 집중되고 있다. 이러한 요구에 따라 지능형 전력시스템과 같은 전력 IT 산업이 새로운 신 성장 동력산업으로 주목받고 있으며, IT 기반의 선진화된 고효율 전력 산업이 저탄소 녹색 성장으로 대표되는 국가 경쟁력 강화의 핵심 요소로 자리 잡고 있다. 지능형 전력시스템은 발전에서부터 송전 및 변전, 그리고 배전/수용가 시스템에 이르기까지 전력의 생산에서부터 소비에 이르는 과정에 자동제어, 센서, 통신망 등의 정보기술을 적용하여 효율적 전력관리를 수행한다. 본 연구에서는 유인 또는 무인변전소의 수배전반에 적용할 수 있는 실시간 전력감시(전류,전압,전력,역률,주파수), 환경감시(배수장수위, 국부적 위험지역의 온도등), 상태감시(진공차단기, 기중차단기의 이상 상태, 배수장 모터 작동상태 등) 등 통합관리 기능을 갖는 다기능 원격 관리시스템을 구현하였으며, 구현된 시스템의 평가를 통해 실제 현장적용 가능성을 평가하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.325-328
• /
• 2009

In this study, A Magnetic stimulation Pulse Train control technique is introduced and applied to Flyback converter operating in discontinuous conduction mode. In contrast to the conventional pulse width modulation control scheme, the principal idea of a Magnetic stimulation Pulse Train is to achieve output voltage regulation using high and low power pulses. The proposed technique is applicable to any converter operating in discontinuous conduction. However, this work mainly focuses on Flyback topology. In this paper, the main mathematical concept of the new control algorithm is introduced and simulations as well as experimental results are presented.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.5
• /
• pp.589-595
• /
• 2022

The white OLED is fabricated with the anthracene-based blue emitting material, 9-(2-naphthyl)-10-(p-tolyl)anthracene (2-NTA) in various volume-ratios of orange dopant, rubrene, which results in pure white emission with C.I.E. coordinate of ~(0.32, 0.39). The devices with <1.5% rubrene show better EL properties (efficiency) than >3% devices. Furthermore the turn-on voltage of 2-NTA WOLED (3.7 V) is lower than that of 2-NTA blue OLED (5.4 V) at the same condition. Conclusively 2-NTA with rubrene less than 1.5% (v/v) could be utilized for the pure WOLED.

• Composites Research
• /
• v.22 no.6
• /
• pp.7-12
• /
• 2009

This paper deals with a fabrication method of composite hinge mechanisms for flapping-wing micro air vehicles. The fabrication process includes curing process of Graphite/Epoxyprepregs, laser cutting for high fabrication repeatability, laminating of Graphite/Epoxy prepregs with Kapton film which is used for flexure, and so on. The fabricated hinge mechanism was attached with PUMPS actuators and the measured flapping angle was $173^{\circ}$ when driving voltage was 300V 170Hz.