• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.477-478
• /
• 2015

2상 유도전동기용 벡터제어 인버터에서는 전류센서를 사용하여 a상 및 b상의 전류를 측정해야 한다. 그러나, 이 전류값을 마이크로컨트롤러의 A/D컨버터로 읽어 들이는 과정에서 전류 센서와 증폭회로로부터 발생하는 오프셋 오차와 변환이득 오차를 포함할 수 있다. 2상 유도전동기의 벡터제어 시스템이 이러한 오차들을 포함한다면 전동기의 출력토크에 리플이 발생한다. 본 논문에서는 이러한 전류측정 오차를 실시간으로 보상하여 전동기의 토크리플을 제거하는 방법을 제안하였으며, 이러한 방식을 360[W]급의 2상 유도전동기용 벡터제어 인버터에 적용하여 컴퓨터 시뮬레이션과 실험으로 유효성을 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.406-407
• /
• 2019

본 논문에서는 유도전동기의 V/F 속도제어 시 특정 구간에 발생하는 전류 리플 저감에 대한 방법을 제안한다. V/F 속도제어 시 특정 구간에 발생하는 전류 리플을 분석하고, 주파수에 따른 극전압 보상량을 결정하여 보상하였다. 극전압 보상을 통해 유도전동기의 전류 리플을 저감시켜 인버터의 효율적인 제어가 가능하게 하였다. 이를 15kW 유도전동기 시스템에 대한 실험을 통해 제안된 방법의 효율성을 검증하였다.

• Journal of Biosystems Engineering
• /
• v.20 no.3
• /
• pp.226-235
• /
• 1995

An unmanned speed sprayer was developed using a remote control and an inductive cable guidance systems to protect operators and environment from hazardous pesticides. The sprayer consists of a remote control system, an induction system, obstacle detectors, control actuators and an one-chip microcomputer. The sprayer can be operated by the induction guidance and/or remote control. The following summarize characteristics of the developed speed sprayer. 1) Both the remote control and the induction guidance operation were possible with the developed speed sprayer. 2) Sixteen functions of the forwarding, backing, halting, steering, 3-way valve for nozzles and fan operating etc. were utilized on the remote control system. 3) It was concluded that the DTMF method, having less transmitting error, performed better than the FSK method for an agricultural remote controller. A radio station may be necessary. 4) The digital inductive guidance system, consisting of five low-impedance detection coils and a window comparator circuit, performed better than the analog detecting system, guiding route using inductive voltage differential from tow detection coils.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.505-516
• /
• 2011

The concept of the IGC(Integrated Guidance and Control) has been introduced to overcome the performance limit of the SGC(Separated Guidance and Control) loop. A new type of IGC with impact angle constraint has been proposed in this paper. Angle of attack, pitch angle rate, pitch angle and line of sight angle are considered as state variables. A controllability analysis and equilibrium point analysis have been carried out to investigate the control characteristic of the prposed IGC. The LQR(Linear Quadratic Regulator) has been adopted for the control law and detailed explanations about the adoption has been provided. The performance comparison between the IGC and the SGC has been carried out. The result of numerical simulations shows that the IGC guarantees better guidance performance than the SGC when the agile maneuver is needed for a specific guidance geometry.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.3
• /
• pp.225-230
• /
• 2007

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3610-3618
• /
• 2015

The congestion of railway vehicle and station shows up to 220%. Especially, transfer resistance of passenger increase rapidly by the collision of circulation. So increment of travel time, occurrence of safety accidents act as a factor that inhibits the utilization of urban railway station. In this paper, to improve traveling speed and comfort of urban rail passengers, urban transit passenger guidance system using congestion management model is proposed. The congestion management model that can mitigate a recurring/non-recurring congestion is constructed and the preliminary design of the system (middleware system, control system, guidance drive system) is carried out. Passenger Guidance System is configured by step for changing the external data into a form usable by the algorithm, step to perform the congestion management algorithm using the real-time data and historical data, step to control device based on the value that is calculated by congestion management algorithm, step to drive the device based on the information in the control system and circulation guidance devices. In the future, detail design will be performed based on the preliminary design. A prototype of the various devices according to the station structures and locations will be made. The control module of guidance device will be developed.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.205-207
• /
• 2008

본 논문에서는 권선형 유도기를 사용한 이중여자 유도형 풍력발전기용 제어기를 개발하였다. 제어기는 발전기의 회전속도와 발전량, 기리고 계통 전압 등의 조건에 따라서 발전기를 자동으로 제어한다. 발전이 가능한 조건에서는 발전기의 유효전력은 최적값이 되도록 제어된다. 또한, 풍력발전 시스템의 무효전력은 계통 운영자의 요구, 계통 전압, 그리고 발전량 등을 고려하여 무효전력 제어 모드를 스스로 결정하도록 하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.4
• /
• pp.395-403
• /
• 2002

The advanced space vector PWM is Implemented for the control system using high arithmetic performance microprocessor such as DSP. It is difficult to realize the complicate SLIM which is applied to SVPWM system, but widely used in vector control system or servo control system for AC motor because of its high performance in current control. In this paper, we use the dynamic characteristic analyzing method that can calculate efficiently the end effect by using equivalent circuit methode in the operating SLIM system modeling and examine the dynamic characteristics of SVPWM with PI controller.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.531-534
• /
• 1999

벡터제어기법은 유도전동기의 무부하 시험 및 구속시험 등을 통하여 구한 고정자 및 회전자 상수를 이용한 전동기의 수학적 모델을 기초로 하여 이루어진다. 따라서 유도전동기의 수학적 모델을 구성하는 고정자 및 회전자 상수의 정확성은 곧 벡터제어의 성능과도 직결된다. 하지만, 온도 상승 등의 영향으로 회전자 저항값은 정상치보다 최대 80∼100%까지 상승 할 수 있으며, 이는 벡터제어의 특성을 저하시키는 요인이 된다. 따라서, 본 연구에서는 회전자 저항을 이용하는 자속 PI제어부를 회전자 저항을 사용하지 않는 자속 퍼지제어부로 대체하고 측정한 3상 전류를 이용하여 회전자 저항값의 변화를 실시간으로 추정·보상하는 퍼지추론기를 구성하므로써 회전자 저항의 변화에도 최적의 효율 및 성능을 가지는 보완된 벡터 제어 기법을 개발하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.235-237
• /
• 2018

In spite of the superiority of the sliding method in the building construction field, the AC induction motor servo control device is used as the power control technology in the building construction field in order to improve the problems of the hydraulic power control method, thereby contributing to the precision control and the productivity improvement. Based on Induction Motor Servo Controller, we proposed the development of a mobile sliding method using a complex combination of PC and MITY (MS) Servo.