• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.8
• /
• pp.44-53
• /
• 2007

In this paper, the Sliding Mode Controller is applied to reduce the starting current of the single phase induction motor. The input voltage to the single phase induction motor is controlled so that the starting current of the motor may be maintained within the rating value and the velocity is also controlled, by adjusting the switching function of the Sliding Mode Controller. The switching of sliding control made appropriately with regard to velocity error signal and acceleration signal. It is shown that the starting characteristics of the single phase induction motor(SPIM) can be greatly enhanced through the sliding control of single phase induction motor.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.1
• /
• pp.57-63
• /
• 2001

The wound rotor type induction motor(WRIM) control system which is widely used in the industry has many maintenance problem because of external resistors and magnetic contactors. In this paper, the simple sensorless vector control algorithm for WRIM is proposed without any additional devices except detecting rotor currents. Because the external resistors are disconnectd and the rotor slip rings are shorten, the power loss due to external resistors is removed and the maintenance problem is improved remarkably. Also, the vector control performance becomes better because the proposed sensorless vector control algorithm does not use the rotor resistance which is usually used to estimate the slip frequency in case of indirect vector control scheme. The proposed algorithm is verified by the digital simulation and the experiment.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.6
• /
• pp.691-697
• /
• 2006

Induction motors are critical components in industrial process. So there are many research in the condition based maintenance, online monitoring system, and fault detection. This paper presents a scheme on the detection and diagnosis of the three-phase squirrel induction motor under unbalanced voltage, broken rotor bar, and a combination of these two faults. Actually one fault happen in operation, it influence other component in motor or cause another faults. Accordingly it is useful to diagnose and detect a combination fault in induction motor as well as each fault. The proposed fault detection and diagnosis algorithm is based on the stator currents from the squirrel induction motor and simulated with the aid of Matlab Simulink.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2313-2315
• /
• 2002

본 논문에서는 3상 유도 전동기 고정자 전류 신호로부터 고정자 권선 고장에 대한 특성주파수를 효과적으로 검출하기 위한 고정자 전류 신호 해석 기법을 제시하였으며, 인위적인 턴 대 턴 고장 전동기의 부하실험을 통해 제안된 기법의 유효성을 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.414-415
• /
• 2018

본 논문에서는 유도 전동기의 V/f 운전 시 동손을 최소로 하는 제어 방법을 제안한다. 제안된 방법은 V/f 운전 시 부하에 따라 최소 동손 제어가 가능하도록 고정자 전압 크기를 가변하여 부하 변동에 따른 동특성 향상과 효율적인 구동이 가능하게 하였다. 5HP 유도 전동기 구동시스템에 대한 시뮬레이션을 통해 제안된 기법의 효용성을 검증하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.370-373
• /
• 2010

본 논문에서는 유도전동기와 제어기의 폐루프 극점을 원하는 위치에 배치하여 유도전동기를 위한 PID제어 동조파라미터를 얻어 유도전동기를 제어하는 방법을 제안한다. 이러한 설계방법은, 설계요건뿐만 아니라 제어기 고유의 안정도와 강인성까지 제공하므로 매우 유용하다.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.284-287
• /
• 2006

본 논문에서는 dSPACE사의 PowerPC603e과 TMS320F240를 사용하는 dSPACE시스템에 의한 유도전동기 구동 시스템의 벡터제어에 대하여 소개한다. MATLAB/Simulink 소프트웨어와 DS1104 R&D 제어보드, Leroy SOMER사의 0.3KW 유도전동기와 IPM 인버터를 본 연구에 사용하였다. dSPACE 시스템은 Simulink 블록들을 사용함으로써 짧은 시간동안에 다양한 형태의 제어기를 설계 및 구현할 수 있는 장점이 있기 때문에 유도전동기의 벡터제어를 쉽게 설계하고 구현할 수 있다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.4
• /
• pp.42-50
• /
• 1993

This paper was proposed drive strategy Induction Motor using the fuzzy algorithm of auto-tuning PID control. In fuzzy control, the 1M driving system is controlled in trial and error without the mathematical modeling and using fuzzy lookup table the real time control is possible. Also, ,dividing the fuzzy rules in several zone, the stability and response of the 1M driving system is improved. The parameters of 1M are varying according to the environmental conditions, the variance of the parameters is affected with the driving characteristics of 1M. Using the fuzzy algorithm of the driving system which has the auto tuning control function for high performance, high accuracy of the driving system, a designed and proposed through the comparision with the PID control method and the driving characteristics is reviewed and analyzed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.3
• /
• pp.240-245
• /
• 1998

This paper presents an improved sliding mode controller design for induction motor. In place of the discontinuous control inputs, continuous inputs are proposed in order to remove the undesirable chattering phenomena, which represent major drawbacks of the sliding mode controller. The design strategy is illustrated with a microprocessor based implementation for the velocity control of an induction motor. An induction motor is operated under sling mode control such that the motor angular velocity follows a predetermined trajectory. The experimental results confirm the validity of the proposed method.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.171-173
• /
• 2008

스칼라 제어에 속하는 V/F 방식은 기본파 전압의 실효값과 주파수를 독립변수로 하여 평균적인 토크를 제어함으로 제어가 쉽고 구현이 간단하여 산업계에서 널리 쓰이고 있다. 그러나 주파수의 변화에 따라서 전동기 내부 임피던스도 변화하기 때문에 단순히 주파수만을 가변 하는 것만으로는 약계자에 의한 토오크 부족이나 과여자에 의한 여자 포화등에 의해 역률과 효율이 떨어진다. 또한 순시적인 토오크 제어가 불가능하여 전동기의 고성능 제어가 어렵다. 본 논문에서는 벡터제어를 적용한 엘리베이터 도어용 유도전동기 구동 시스템을 제안하고 실험을 통해 그 성능을 확인하였다.