• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.44-50
• /
• 2010

Recently, the crude oil price per one barrel in 2005 cost 49.4 dollars. But the value of crude oil in 2007 had ascended 68.4 dollars which was skyrocketed 38.5[%] owing to the sudden rise of energy price. As it has been growing the necessity of energy efficiency, energy intentive companies actively try to implement energy management system It has been studied to improve the energy saving for household sector using the smart metering system which can give the information of energy prices, pattern on real time to energy consumers and voluntarily lead the activities of energy saving. In this paper, we estimated potential benefits and value of smart metering system through california test.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.619-633
• /
• 1994

A wave deformation model for general purpose combined refraction, diffraction, and breaking is developed in the shallow water. A parabolic approximation equation considered a higher order diffraction term is derived from the previous mild slope equation. A wave energy dissipation term due to bottom friction and breaking is introduced from the turbulence model. The Crank-Nicoloson implicit scheme is used in the numerical calculation, then the solutions are compared with the various hydraulic experiment data in the circular, the elliptic shoal, and the surf zone. The wave height decay in the surf zone is sensitively affected by the incident wave steepness, and the wave height variation around the elliptic shoal is well explained by the non-linear dispersion relation and the wave energy dissipation term. The model is also applied to a field coastal area and reasonable results are obtained.

• Journal of the Korea Convergence Society
• /
• v.11 no.7
• /
• pp.157-162
• /
• 2020

In recent years, laser induced graphene process have been intensively studied for eco-friendly electronic device such as flexible electronics or thin film based energy storage devices because of its simple and effective process. In order to increase the performance and efficiency of an electronic device using such a graphene patterned structure, it is essential to study an optimized laser patterning condition as small as possible linewidth while maintaining the graphene-specific 2-dimensional characteristics. In this study, we analyzed to find the optimal line pattern by using a Ti:sapphire femtosecond laser based photo-thermal reduction process. we tuned intensity and scanning speed of laser spot for generating effective graphene characteristic and minimum thermal effect. As a result, we demonstrated the reduced graphene pattern of 30㎛ in linewidth by using a focused laser beam of 18㎛ in diameter.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.1
• /
• pp.20-30
• /
• 2010

In this paper, a new tomographic scan method with fixed installed detectors and rotating source from gamma projector was presented to diagnose the industrial plants which were impossible to be examined by conventional tomographic systems. Weight matrix calculation method which was suitable for volumetric detector and statistical iterative reconstruction method were applied for reconstructing the simulation and experimental data. Monte Carlo simulations had been performed for two kinds of phantoms. Lab scale experiment with a same condition as one of phantoms, had been carried out. Simulation results showed that reconstruction from photopeak counting measurement gave the better results than from the gross counting measurement although photopeak counting measurement had large statistical errors. Experimental data showed the similar result as Monte Carlo simulation. Those results appeared to be promising for industrial tomographic applications, especially for petrochemical industries.

• Journal of Korea Foresty Energy
• /
• v.21 no.1
• /
• pp.56-64
• /
• 2002

2kg of the dried leaves of Thuja orientalis Linnaeus were ground, extracted with acetone-$H_2O$(7:3, v/v), concentrated, and fractionated with a series of hexane, $CH_2C1_2$ EtOAc and water on a separators funnel. Each fraction was freeze dried to give dark-brown powder and a EtOAc soluble portion. of the powder was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluents. Spectrometric analyses such as NMR and FAB-MS including TLC were performed to characterize the structures of isolated compounds. The leave of Thuja orientalis Linnaeus contained a large amount of flavononol derivatives such as quercetin-3-O-$\alpha$-L-rhamnopyranoside and myricetin-3-O-$\alpha$-L-rhamnopyranoside in addition to a small amount of flavan compounds such as (+)-catechin and (+)-gallocatechin. The antioxidative activities of each fractions and isolated compounds were done by DPPH radical scavenging test, and all of them were indicated strong antioxidative activities.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.5
• /
• pp.617-623
• /
• 2012

In this paper, we propose a gait generation method for a quadruped robot to walk efficiently on the slope, which uses the waist joint of a quadruped robot. We derive the kinematic model of a quadruped robot with waist joint using the Denavit-Hartenberg representation method and the algebraic method. In addition, the gaits are generated based on the wave gait. In the proposed gait generation method, first in order to alleviate the mechanical restriction and the reduction of the stride, we determine the appropriate waist joint angle according to the slope degree, and then decide the location of the tiptoe of a quadruped robot by exploring the workspace. Finally, through computer simulations, we verify the effectiveness and applicability of the proposed method.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.99-100
• /
• 2006

절연 게이트 바이폴라 트랜지스터 (Insuialed atc Bipolar Transistor : IGBT)는 높은 전류구동 능력과 높은 입력 임피던스 특성으로 인해 대전력 스위칭 소자로 널리 응용되고 있다. 특히, 대용량 모터 구동을 위해 응용되는 경우, 모터의 부하 특성상, 모터의 단락에 의한 단락 회로 (Short-circuit fault) 현상을 비롯한 클램핑 다이오드의 파손으로 인한 unclamped 유도성 부하 스위칭 (UIS) 상황에서 견딜 수 있도록 설계되어야 한다. 이를 위해, 이전 연구를 통해 Floating p-well을 600V급 IGBT에 도입함으로써 UIS 상황에서 IGBT가 견딜 수 있는 에너지(항복 에너지)륵 증가시키고 Floating p-weil 전압을 감지함으로써 단락 회로 상황에서 IGBT가 보호될 수 있도록 보호회로를 제안하고 검증하였다. 그러나 이 보호회로는 수평형 금속 산화막 반도체 전계 효과 트랜지스터 (Latcral MOSFET)로 제작됨으로써 보호회로 기능을 수행하기 위해서는 넓은 면적을 요구하였다. 또한, 정상적인 동작 상황에서 오류를 감지 (오류 감지: False detection)하는 동작으로 인해 추가적인 filter를 요구함으로써 보호회로 동작 속도를 감소시켰다. 이러한 단점을 해결하기 위해, 수평형 절연 게이트 바이폴라 트랜지스터 (Lateral IGBT : LIGBT)를 보호회로에 적용함으로써 LIGBT의 높은 전류 구동능력을 이용하여 기존 보호회로 면적의 30% 수준의 보호회로를 구현하였다. 또한, 구현된 보호회로는 오류 감지 현상을 제거함으로써 보호회로의 동작 속도를 개선하였다. 제안된 보호회로와 1200V급 IGBT는 7장의 마스크를 이용한 표준 수평형 IGBT 공정을 이용하여 제작되었으며, 특히, 전자빔 조사를 이하여 턴오프 속도를 개선함으로써 고속 스위칭에 적합하도록 최적화 되었다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.1
• /
• pp.17-26
• /
• 2014

This paper presents a dynamic crack propagation algorithm based on the Moving Least Squares(MLS) difference method. The derivative approximation for the MLS difference method is derived by Taylor expansion and moving least squares procedure. The method can analyze dynamic crack problems using only node model, which is completely free from the constraint of grid or mesh structure. The dynamic equilibrium equation is integrated by the Newmark method. When a crack propagates, the MLS difference method does not need the reconstruction of mode model at every time step, instead, partial revision of nodal arrangement near the new crack tip is carried out. A crack is modeled by the visibility criterion and dynamic energy release rate is evaluated to decide the onset of crack growth together with the corresponding growth angle. Mode I and mixed mode crack propagation problems are numerically simulated and the accuracy and stability of the proposed algorithm are successfully verified through the comparison with the analytical solutions and the Element-Free Galerkin method results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.552-554
• /
• 1999

Phonon scattering and impact ionization models have been presented to analyze hot carrier transport in high energy region, using full band model and Fermi's golden rule. We have investigated temperature dependent properties for impact ionization process of Si using realistic energy band structures at 77K and look. The realistic full band model, obtained from the empirical pseudopotential method with local from factors, is used to calculate scattering rate. The accurate calculation of impact ionization rate requires the use of a wavevector- and frequency-dependent dielectric function ξ ( q,$\omega$). The empirical phonon scattering rate P$\sub$ph/, is given by deriving from linear function for P$\sub$ph/ versus D(E) since the phonon scattering rate is linearly depended on density of states D(E). Impact ionization rate p,, is calculated from the first principle's theory. and fitted by modified Keldysh formula having power of above 2.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.2
• /
• pp.190-198
• /
• 1995

Many industrial servo amplifiers employ power transister as output device. Thyristor converters are not adopted to drive servo motor, although thyristor is superior to power TR in power rating, noise immunity, price, and size. The reason is, thyristor has no ability of self turn - off. Here in this paper line commutation, in which thyristor is turned off naturally since cathode voltage is higher than anode as time goes by, is employed to turn on thyristor with a delicate sequence. We developed thyristor servo amplifier which does not cause any damage on thyristor because it is designed to prevent triggering the two SCRs in the same arm simultaneously. And it was made clearly how to trigger SCR without any power line shorting and also harmonic analysis is carried out with the aid of FFT analyzer and proved that it can be used even severe reactive load. The designed circuit operated as a good DC amplifier in conventinal servomotor and the results can be use as a position control system application.