• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.10
• /
• pp.27-34
• /
• 2006

This paper proposes a new method of on-line estimation for rotor resistance of the induction motor in the indirect vector controlled drive, using artificial neural network (ANN). The back propagation algorithm is used for training of the neural networks. The error between the desired state variable of an induction motor and actual state variable of a neural network model is back propagated to adjust the weight of a neural network model, so that the actual state variable tracks the desired value. The performance of rotor resistance estimator and torque and flux responses of drive, together with these estimators, are investigated variations rotor resistance from their nominal values. The rotor resistance are estimated analytically, using the proposed ANN in a vector controlled induction motor drive.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.600-608
• /
• 2016

This paper will describe the optimal design of an induction motor for the propulsion of an electric railway. First, the design requirements are satisfied through the basic model, which is designed in a design process using the equivalent circuit. Then, Rotor slot and Airgap are determined by analysis and comparison of torque, torque ripple, efficiency, and power factor. In addition, Rotor slot shape is optimized by using the response surface method. Finally, through the results of equivalent circuit and FEA, the final model is found to satisfy the design requirements; its efficiency was far higher than that of the basic model.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.48-54
• /
• 2002

This paper is described the indirect induction heated boiler and induction heated hot air producer using the voltage-fed series resonant high-frequency inverter which can operate in the frequency range from 20 kHz to 50 kHz. A specially designed induction heater is composed of laminated stainless plates, which have many tiny holes and are interconnected by spot welding. This heater is inserted into the ceramic type vessel with external working coil. This working coil is connected to the inverter and turbulence fluid through this induction heater to moving fluid generates in the vessel. The operating performances of this unique appliance in next generation and its effectiveness are evaluated and discussed from a practical point of view.

• Membrane Journal
• /
• v.26 no.2
• /
• pp.108-115
• /
• 2016

This study is to evaluate the performance of draw solutions in the water reuse of sewage discharge water using fertilizer drawn forward osmosis. Feed water used in all experiments was the effluent from secondary sedimentation tank in activated sludge process. Considering osmotic pressure, solubility, and pH, $NH_4H_2PO_4$, KCl, $KNO_3$, $NH_4Cl$, $(NH_4)_2HPO_4$, $NH_4NO_3$, $NH_4HCO_3$, and $KHCO_3$ were screened from a comprehensive lists of fertilizer. Their performances were evaluated in terms of water permeate flux and reverse solute flux. KCl showed the highest average water flux followed by $NH_4Cl$, $NH_4NO_3$, $KNO_3$, $KHCO_3$, $NH_4HCO_3$, $NH_4H_2PO_4$, and $(NH_4)_2HPO_4$. Using KCl as draw solution, the average water permeate flux was 13.49 LMH. There was no big difference in osmotic pressure between the effluent from secondary sedimentation tank and deionized water. $NH_4H_2PO_4$ showed the lowest reverse solute flux followed by $NH_4Cl$, $(NH_4)_2HPO_4$, $KNO_3$, $NH_4HCO_3$, and $NH_4NO_3$. Using $NH_4H_2PO_4$ as draw solution, the reverse solute flux was $4.96{\times}10^{-3}mmol/m^2{\cdot}sec$.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.3
• /
• pp.189-196
• /
• 2011

In this paper, we analyze the error performance of SIC-based signal detection methods in MIMO systems. Considered detection methods are SIC signal detection and LR-SIC signal detection. We derive BLER performance of the methods and the performance is confirmed by computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7A
• /
• pp.522-527
• /
• 2012

In this paper, union upper bound on convolutional coded bit error rates (BER) is derived for downlink orthogonal frequency division multiple access (OFDMA) networks. According to the numerical results, for the small network loads, the BER performance with Laplacian decoding metric outperforms the BER performance with Gaussian decoding metric under downlink OFDMA networks with Viterbi decoder.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12A
• /
• pp.1787-1795
• /
• 2000

이 논문에서는 레일레이 감쇄 채널에서 타이밍 또는 위상 오류를 갖는 혼합 간섭 제거 기법을 이용한 DS/CDMA 시스템의 평균 비트 오류 확률을 분석한다. 유도한 결과를 타이밍 또는 위상 오류를 갖는 일반 상관 수신기의 평균 비트 오류 확률과 비교 분석한다. 평균 비트 오류 확률은 정규 근사법을 이용하여 유도하며, 칩 시간에 대한 타이밍 오류의 비, 위상 오류의 정도, Eb/No에 따라 혼합 간섭 제거 기법을 이용한 수신기의 성능을 분석한다. 혼합 간섭 제거 기법을 이용한 수신기의 평균 비트 오류 확률은 타이밍 또는 위상 오류에 의해 증가하나 타이밍 또는 위상 오류가 작은 경우 오류가 없는 일반 상관 수신기에 비해 성능이 크게 개선된다.

• 한국항공운항학회:학술대회논문집
• /
• 2015.11a
• /
• pp.50-54
• /
• 2015

구형무인비행체는 다중 모터를 이용한 무인항공기에 비행 소형화, 경량화, 경제화 등의 장점을 가지고 있다. 본 논문에서는 구형무인비행체의 경로 추종을 위한 제어기 설계 및 성능에 대한 내용을 다루고 있다. 먼저 구형무인비행체의 운동방정식이 제어기 설계를 위해 유도되었고, 유도된 운동방정식을 이용해 경로 추종 제어기를 설계하였다. 구형무인비행체의 자세제어는 무게중심을 변화하는 방법을 사용하였다. 요구 경로를 설정하여 설계된 제어기의 경로 추종 성능을 MATLAB 시뮬레이션을 통해 확인하였다. 시뮬레이션 결과, 제시된 제어기가 설정된 경로를 추종하고 있음을 확인하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.84-91
• /
• 2008

In this paper, we propose a Sequency domain based BPM-UWB receiver compensating for distortion in the multi-path channel. We give a mathematical derivation for the proposed receiver which exploits a matched filter theory for optimum reception. We also analyze the system performance and present the simulation results that show the performance enhancement of the proposed system.

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.430-435
• /
• 2015

Two-dimensional analysis between the explosive performance and the impact sensitivity for methylnitroimidazole derivatives was performed to understand where these new energetic molecules could be utilized. The explosive performance was analyzed with the Cheetah program, while the impact sensitivity was predicted using neural network analysis. Successive nitration of methylimidazole made the molecule more sensitive, but methyltrinitroimidzole appeared to have a relatively good safety characteristic. We recently developed a novel method to analyze the potential usage of new energetic molecules using a two-dimensional chart, where the explosive performance and the impact sensitivity were located on the X-axis and Y-axis, respectively. An analysis of a two-dimensional plot between the performance and the sensitivity indicated that methyldinitroimidazole would be useful for insensitive explosive formulations, while methyltrinitroimidazole was forecasted for use as an ingredient for high explosive formulations.