• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.4
• /
• pp.209-216
• /
• 2021

Purpose: The purpose of this study is to compare the shear bond strength of resin cement for orthodontic brackets without applying an adhesive primer, to the case of applying an adhesive primer. Materials and Methods: The specimens were divided into three experimental groups, Transbond XT, GC Ortho Connect and Orthomite LC, and the enamel surface was divided into two sections, one with 37% phosphoric acid and the other with 37% phosphoric acid and an adhesive primer or universal adhesive. Each of three types of cement was applied to orthodontic bracket, and after bonding, the shear bond strength was measured. Results: Transbond XT and Orthomite LC significantly increased shear bond strength when orthodontic brackets were bonded after applying an adhesive primer and universal adhesive, respectively. Conclusion: It is expected that application of an adhesive primer or universal adhesive after acid etching will improve shear bond strength of orthodontic brackets in Transbond XT and Orthomite LC.

• Journal of the Korea Convergence Society
• /
• v.7 no.1
• /
• pp.25-30
• /
• 2016

Virtual reality items are increased take-all type of markets like Universal, such as the United States as a leader in the virtual reality technology. Multi-user have to get direct experiences with the whole body like visual, tactile, hearing, sense of movement, and it must be developed new forms of content platform to enjoy immerse deeply into the content. Visitors are not to enjoy the content passively but rather to enjoy the content actively. So it like that should develope content to maximize the immersion. It need the development of new forms of mixed 5D virtual reality Attraction content with all of factors like $360^{\circ}$ circle vision, stereoscopic images, interaction, simulator, and the environmental effect. We proposes how to make the color and brightness calibration technology for this purpose.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.1
• /
• pp.33-41
• /
• 2010

This study was aimed at the design of the dies for the unified pipe joint of the intermediate shaft using the computer simulation to shorten the period of production, on the basis of the process planning which was designed by the field experts. In the computer simulation, 'Deform-3d' and 'eesy-DieOpt' have been used, which are the commercial process analysis and die design program. Through the process analysis, we could know the propriety of the forming process, the inner pressure of the die and the suitable fitting pressure between the insert and the sleeve which was not showing any positive tangential stresses in the insert. Through the simulation of die design, we could know the number of the stress ring, the diameter ratios, the stresses of the die, the shrink fitting tolerance and temperature in the condition of the already determined maximum outer die diameter of the multi-stage former. The validity of the die design using the computer simulation was analyzed by the experiments and the results were satisfactory. As the results of this study, the new and easy die design system for multi-forging has been developed.

• Journal of the Korean Data and Information Science Society
• /
• v.9 no.2
• /
• pp.237-246
• /
• 1998

We put the pseudo-random number generator into catagories like MiCG, MuCG, URG, ICG, EICG, and test uniformity and independency by 10,000 times through n empirical trial after selecting this random number generator. Here, from a fraction of data(20, 40, 60, 80, 100) with a significance level of 0.1, 0.05 and 0.01, we drive cumulative frequency with K-S, $X^{2}$, poker, run, autocorrelation test. As a result from the uniformity and independency among five random number generators based on all these data, all random number generator except EICG passed uniformity and independency test, and the URG turn out to be excellent in periodicity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.3
• /
• pp.268-276
• /
• 1992

In this paper, we present an discrimination method of unknown digital modulated signals in noisy communication environment. We propose the use of an identification procedure based on time domain signal parameters. First, We extract instantaneous envelope. Frequency and difference phase as the basic feature informations from received signals. In order to identify signals using the extracted feature informations, we design the two dimensional feature space. The extracted feature infomations are mapped into2Dfeature space using 2D feature points. The procedure has been tested by simulations on a computer in noisy communication environment, and the considered signals are ASK-W, ASK-4, BPSK, QPSK, 8PSK, FSK, and QAM.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.69-74
• /
• 2013

According to the axial torsion applied at power transmission and the vibration from the roughness of road surface, this paper analyzes the stresses on two kinds of universal joint model. As stress and deformation at model 2 becomes smaller than model 1 on structural analysis, model 2 is more stabilized than model 1. The natural frequencies at model 1 and 2 are 7,040 and 9,540 Hz respectively. As the natural frequency range of model 2 becomes higher than model 1, model 2 becomes safer than model 1. Critical frequencies at these models are calculated through harmonic response analyses. On critical frequencies at model 1 and 2, the stress at model 2 becomes lower than 2 times as much as model 1 and the deformation at model 2 becomes lower than 4 times as much as model 1. Model 2 on durability is thought to become better than model 1. This study result is applied with the design of safe universal joint and it can be useful to improve the durability by predicting prevention against the deformation due to its vibration.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.1-7
• /
• 2017

It has been developed large mooring fittings having the capacity of 160 tons and 180 tons installed on 170K LNG FSRU. The finite element analysis for the mooring fittings was carried out in order to check the structural integrity and to confirm satisfaction of the rule requirements. The 3 kinds of mooring fittings such as chock, bollard and universal fairlead are selected for FE analysis and load test. According to the FE analysis results, all the stress levels satisfied the acceptance criteria guided by the IACS UR A2, ISO standard, ship rules and OCIMF. As test results under design load, no structural defects were found.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.36-40
• /
• 2008

In 1999, the origin concept of blog was introduced in America for sharing information, from the end of 2002. It appealed to people in Korea and also has been developed from the original blog style to the advanced style combining social network service, the reason of unique evolution in Korean blog style is on what the cultural communication method has influenced. Nowadays world is smaller and distance between countries is more and more close than before, by that reason designer peruses global design, but we realize that the globalization should consider local society through blog, therefore this study presents the method of communication and cultural attribute and human relationship that made by old tradition by the means of criticism focused on local culture.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.5
• /
• pp.582-588
• /
• 2011

This study was aimed at the design of the dies for the unified shaft joint using the computer simulation to shorten the period of production, on the basis of the process planning which was designed by the field experts. In the computer simulation, 'Deform-3d' and 'Eesy-DieOpt' have been used, which are the commercial process analysis and die design program. Through the process analysis, we could know the propriety of the forming process, the inner pressure of the die and the suitable fitting pressure between the insert and the sleeve which was not showing any positive tangential stresses in the insert. Through the simulation of die design, we could know the number of the stress ring, the diameter ratios, the stresses of the die, the shrink fitting tolerance and temperature in the condition of the already determined maximum outer die diameter of the multi-stage former. The validity of the die design using the computer simulation was analyzed by the experiments and the results were satisfactory. As the results of this study, the new and easy die design system for multi-forging has been developed.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.3
• /
• pp.117-124
• /
• 2007

A few people are frequently using Korean text entry function in the mobile phone. To make matters worse, too many kinds of Korean text entry methods exist in the market, compelling mobile phone users to learn how to input texts all over again, whenever they purchase a new mobile phone. The purpose of this study is to propose a universal design of Korean text entry method for mobile phones. Several experiments and several questionnaire surveys were conducted in order to induce design factors for the universal design. Participants were mobile phone users with the diverse levels of text entry expertise and with the diverse ages. The results of this investigation were identical, irrespective of participants' age and expertise. The efficiency of the text entry method was not more important factor than memorability. The layout of vowels to keypad was preferred to map just 3 strokes to the 3 buttons so that users can make for themselves vowels that they want to input. The preference on the consonants layout was different according to investigation methods. According to the survey, it was preferred that consonants were arranged by alphabet order. However, the result of text entry speed measurement was that the arrangement by alphabet order was not superior to the typical arrangement. Such results may be used to design mobile phones for diverse users.